Digitalna knjižnica Slovenije
Narodna in univerzitetna knjižnica
Splošne knjižnice
Celjsko območje
Vse knjižnice območja
Osrednja knjižnica Celje
Knjižnica Laško
Osrednja knjižnica Mozirje
Knjižnica Šentjur
Knjižnica Šmarje
Knjižnica Velenje
Medobčinska splošna knjižnica Žalec
Dolenjsko območje
Knjižnica Mirana Jarca Novo mesto
Knjižnica Brežice
Knjižnica Kočevje
Valvasorjeva knjižnica Krško
Knjižnica Miklova hiša, Ribnica
Gorenjsko območje
Mestna knjižnica Kranj
Občinska knjižnica Jesenice
Knjižnica A. T. Linharta, Radovljica
Knjižnica Ivana Tavčarja, Škofja Loka
Knjižnica dr. Toneta Pretnarja, Tržič
Goriško območje
Vse knjižnice območja
Goriška knjižnica Franceta Bevka Nova Gorica
Lavričeva knjižnica, Ajdovščina
Mestna knjižnica in čitalnica Idrija
Knjižnica Cirila Kosmača Tolmin
Koroško območje
Koroška osrednja knjižnica dr. Franca Sušnika Ravne na Koroškem
Knjižnica Radlje ob Dravi
Knjižnica Ksaverja Meška, Slovenj Gradec
Obalno-kraško območje
Osrednja knjižnica Srečka Vilharja Koper
Knjižnica Makse Samsa, Ilirska Bistrica
Mestna knjižnica Izola - Biblioteca civica di Isola->Matična knjižnica Izola
Mestna knjižnica Piran
Kosovelova knjižnica Sežana
Osrednjeslovensko območje
Mestna knjižnica Ljubljana
Knjižnica Jožeta Udoviča, Cerknica
Knjižnica Domžale
Knjižnica Grosuplje
Knjižnica Franceta Balantiča Kamnik
Knjižnica Litija
Knjižnica Logatec
Knjižnica Medvode
Cankarjeva knjižnica Vrhnika
Pomursko območje
Pokrajinska in študijska knjižnica Murska Sobota
Javni zavod Knjižnica Gornja Radgona
Splošna knjižnica Ljutomer
Spodnjedravsko območje
Knjižnica Ivana Potrča Ptuj
Knjižnica Franca Ksavra Meška Ormož
Štajersko območje
Mariborska knjižnica
Knjižnica Lenart
Knjižnica Josipa Vošnjaka Slovenska Bistrica
Druge knjižnice
Bayerische StaatsBibliotek
Centralna pravosodna knjižnica
Centralna tehniška knjižnica Univerze v Ljubljani
Knjižnica Dušana Černeta Trst
Kraljeva knjižnica, Danska nacionalna knjižnica in univerzitetna knjižnica v Kopenhagnu
Narodna in študijska knjižnica
Österreichische Nationalbibliothek
Semeniška knjižnica
Slovenska študijska knjižnica Celovec
Škrabčeva knjižnica
Univerzitetna knjižnica Maribor
Arhivi in muzeji
Arhiv Republike Slovenije
Goriški muzej
Loški muzej Škofja Loka
Muzej in galerije mesta Ljubljana
Muzej Miklova hiša
Muzej novejše zgodovine Celje
Narodni muzej Slovenije
Pokrajinski arhiv Maribor
Pokrajinski muzej Kočevje
Prirodoslovni muzej Slovenije
Slovenian Museum and Archives - Slovenski muzej in arhiv
Slovenski etnografski muzej
Slovenski šolski muzej
Škofijski arhiv Koper
Menu
SLO
|
ENG
author
full-text
keywords
date
title
source
publisher
collection
AND
OR
NOT
author
full-text
keywords
date
title
source
publisher
collection
AND
OR
NOT
author
full-text
keywords
date
title
source
publisher
collection
AND
OR
NOT
author
full-text
keywords
date
title
source
publisher
collection
AND
OR
NOT
ADVANCED SEARCH
About us
Cooperation
Terms of use
dLib Statistics
Partners
News
Virtual exhibitions
Contact us
My dLib.si
Email
:
Pass.:
Login
Register!
Forgoten password
Number of hits: 69
Source type
journals (69)
Journals - titles
Strojniški vestnik (69)
Journals - form
articles (59)
journals (10)
Language
english (64)
slovenian (10)
Date
2021 (69)
Location
Univerza v Ljubljani, Fakulteta za strojništvo (69)
Content
Business Management (1)
Chemical Engineering (1)
Computer Science (1)
Engineering and Technology (39)
Industry, Craft, Handicraft (3)
Mathematics (3)
Medicine (1)
Physics (15)
Publisher
= Association of Mechanical Engineers and Technicians of Slovenia etc. (33)
Fakulteta za strojništvo (1)
Zveza strojnih inženirjev in tehnikov Slovenije [etc.] = Association of Mechanical Engineers and Technicians of Slovenia [etc.] (5)
Zveza strojnih inženirjev in tehnikov Slovenije etc. (63)
Rights
In Copyright (69)
Access
Public (69)
Search in (
69
)
Sort by:
relevance
relevance
date ascending
date descending
input date ascending
input date descending
title ascending
title descending
Evaluation of mechanical, microstructures and wear behaviours of aluminium alloy reinforced with ...
Contibutors:
Suleiman, Idawu Yakubu (author)
/
Kasim, Auwal (author)
/
Mohammed, Abdullahi Tanko (author)
/
Sirajo, Munir Zubairu (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 1/2
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1786 kB)
1. TXT document (34 kB)
Demonstration of interference patterns by the random walk of particles
Contibutors:
Grabec, Igor (author)
/
Sok, Nikolaj (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 1/2
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1003 kB)
1. TXT document (11 kB)
A model for material strengthening under the combined effect of cavitation-bubble collapse and Al...
Contibutors:
Liu, Lei (author)
/
Guo, Huafeng (author)
/
Yu, Ping (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 1/2
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (5078 kB)
1. TXT document (33 kB)
Relationship between tire ground characteristics and vibration noise
Contibutors:
Zhou, Haichao (author)
/
Li, Huiyun (author)
/
Liang, Chen (author)
/
Zhang, Lingxin (author)
/
Wang, Guolin (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 1/2
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (4181 kB)
1. TXT document (53 kB)
Media flow analysis of single-channel pre-mixed liquid CO2 and MQL in sustainable machining
Contibutors:
Grguraš, Damir (author)
/
Sterle, Luka (author)
/
Malneršič, Aleš (author)
/
Kastelic, Luka (author)
/
Courbon, Cedric (author)
/
Pušavec, Franci (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 1/2
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (2208 kB)
1. TXT document (28 kB)
Reliability-based design optimization of pump penetration shell accounting for material and geome...
Contibutors:
Velayudhan, Gautham (author)
/
Venugopal, Prabhu Raja (author)
/
Gnanasigamony Thankareathenam, Ebron Shaji (author)
/
Selvakumar, Mohanraj (author)
/
Pudukarai Ramaswamy, Thyla (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 6
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (2020 kB)
1. TXT document (35 kB)
Residual, corrosion & tribological behavior of HVOF sprayed sustainable temperature-dependent car...
Contibutors:
Tyagi, Ankit (author)
/
Murtaza, Qasim (author)
/
Walia, Ravinderjit Singh (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 4
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1681 kB)
1. TXT document (34 kB)
Dynamic modelling, experimental identification and computer simulations of non-stationary vibrati...
Contibutors:
Đokić, Radomir (author)
/
Vladić, Jovan (author)
/
Kljajin, Milan (author)
/
Jovanović, Vesna (author)
/
Marković, Goran (author)
/
Karakašić, Mirko (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 6
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (2065 kB)
1. TXT document (56 kB)
Design of a throat-extended FDM extruder for multi-axis 3D printing
Contibutors:
Liu, Hao (author)
/
Liu, Zhoupeng (author)
/
Hao, Siting (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 4
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (2543 kB)
1. TXT document (46 kB)
Minimization of the lifecycle cost of a rotary heat exchanger used in building ventilation system...
Contibutors:
Sokolnikas, Ignas (author)
/
Čiuprinskas, Kęstutis (author)
/
Čiuprinskiene, Jolanta (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 6
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (939 kB)
1. TXT document (37 kB)
Process parameters optimization for maximizing tensile strength in friction stir-welded carbon steel
Contibutors:
Bhatia, Anmol (author)
/
Wattal, Reeta (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 6
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (2581 kB)
1. TXT document (41 kB)
Virtual minimization of residual stress and deflection error in the five-axis milling of turbine ...
Contibutors:
Soori, Mohsen (author)
/
Asmael, Mohammed (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 5
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (2079 kB)
1. TXT document (41 kB)
A strain-based method to estimate longitudinal force for intelligent tires by using a physics-bas...
Contibutors:
Zhou, Haichao (author)
/
Li, Huiyun (author)
/
Yang, Jian (author)
/
Chen, Qingyun (author)
/
Wang, Guolin (author)
/
Han, Tong (author)
/
Ren, Jieyu (author)
/
Ma, Te (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 4
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1357 kB)
1. TXT document (54 kB)
Studying the performance of cutting carbon fibre-reinforced plastic using an abrasive water jet t...
Contibutors:
Hussien, Ahmed A. (author)
/
Qasem, Isam (author)
/
Kataraki, Pramodkumar S. (author)
/
Al-Kouz, Wael G. (author)
/
Janvekar, Ayub Ahmed (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 4
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (980 kB)
1. TXT document (32 kB)
Ultrasonic scattering attenuation in nodular cast iron
Contibutors:
Santos, Mário (author)
/
Santos, Jaime (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 5
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1087 kB)
1. TXT document (49 kB)
HIL evaluation of a novel real-time energy management system for an HEV with a continuously varia...
Contibutors:
Taghavipour, Amir (author)
/
Alipour, Ali (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 4
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1629 kB)
1. TXT document (45 kB)
Investigation on the modeling and dynamic characteristics of a novel water hydraulic proportional...
Contibutors:
Han, Mingxing (author)
/
Liu, Yinshui (author)
/
Liao, Yitao (author)
/
Wang, Shucai (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 5
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (4265 kB)
1. TXT document (41 kB)
Ultra-precision single-point diamond turning of a complex sinusoidal mesh surface using machining...
Contibutors:
Ning, Peixing (author)
/
Zhao, Ji (author)
/
Ji, Shijun (author)
/
Li, Jingjing (author)
/
Dai, Handa (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 7/8
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (3694 kB)
1. TXT document (23 kB)
Basic theory and design method of variable shaft angle line gear mechanism
Contibutors:
Chen, Yang-zhi (author)
/
He, Chao (author)
/
Lyu, Yue-ling (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 7/8
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1574 kB)
1. TXT document (45 kB)
Predictive estimation of sliding bearing load-carrying capacity and tribological durability
Contibutors:
Chernets, Myron (author)
/
Opielak, Marek (author)
/
Kornienko, Anatolii (author)
/
Radko, Oleg (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 7/8
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (623 kB)
1. TXT document (26 kB)
Experimental investigation and mathematical modelling of heat transfer coefficient in double slop...
Contibutors:
Patel, Raj Vardhan (author)
/
Yadav, Anshul (author)
/
Winczek, Jerzy Adam (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 7/8
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1724 kB)
1. TXT document (43 kB)
Mechanical properties of adhesive joints made with pressure-sensitive adhesives
Contibutors:
Rudawska, Anna (author)
/
Wahab, Magd Abdel (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 7/8
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (637 kB)
1. TXT document (40 kB)
Characterization of the AZ31/AW-6060 joint fabricated using compound casting with a Zn interlayer...
Contibutors:
Bucki, Tomasz (author)
/
Konieczny, Marek (author)
/
Bolibruchová, Dana (author)
/
Rzepa, Sylwia (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 7/8
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (5123 kB)
1. TXT document (34 kB)
Strojniški vestnik (2021, volume 67, issue 9)
Source:
Strojniški vestnik
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (9997 kB)
1. TXT document (273 kB)
Strojniški vestnik (2021, volume 67, issue 7/8)
Source:
Strojniški vestnik
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (4208 kB)
1. TXT document (231 kB)
Dynamic analysis of line gear pair based on numerical manifold method
Contibutors:
Ding, Jiang (author)
/
Deng, Aiping (author)
/
Liu, Liwei (author)
/
Lu, Mengen (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 6
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1950 kB)
1. TXT document (46 kB)
Optimization of the internal roller burnishing process for energy reduction and surface properties
Contibutors:
Nguyen, Trung Thanh (author)
/
Le, Minh-Thai (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 4
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (2368 kB)
1. TXT document (44 kB)
Determining optimum rotary blade design for wind-powered water-pumping systems for local selected...
Contibutors:
Mohammed, Abdulbasit (author)
/
Lemu, Hirpa G. (author)
/
Sirahbizu, Belete (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 5
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1163 kB)
1. TXT document (30 kB)
Experimental investigation of a cryogenically cooled oxygenmist near-dry wire-cut electrical disc...
Contibutors:
Sampath, Boopathi (author)
/
Myilsamy, Sureshkumar (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 6
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1238 kB)
1. TXT document (33 kB)
Strojniški vestnik (2021, volume 67, issue 10)
Source:
Strojniški vestnik
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (5090 kB)
1. TXT document (275 kB)
Multi-parametric dynamic analysis of a rolling bearings system
Contibutors:
Kydyrbekuly, Almatbek (author)
/
Nikonov, Anatolij (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 9
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1873 kB)
1. TXT document (47 kB)
Nonlinear control of a pneumatic actuator based on a dynamic friction model
Contibutors:
Bo Tran, Xuan (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 9
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (6490 kB)
1. TXT document (53 kB)
Control of an anthropomorphic manipulator using LuGre friction model - design and experimental va...
Contibutors:
Ali, Khurram (author)
/
Mehmood, Adeel (author)
/
Muhammad, Israr (author)
/
Razzaq, Sohail (author)
/
Iqbal, Jamshed (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 9
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (3160 kB)
1. TXT document (40 kB)
Strojniški vestnik (2021, volume 67, issue 11)
Source:
Strojniški vestnik
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (20 MB)
1. TXT document (317 kB)
Predictions of friction coefficient in hydrodynamic journal bearing using artificial neural networks
Contibutors:
Milčić, Dragan (author)
/
Alsammarraie, Amir (author)
/
Madić, Miloš (author)
/
Krstić, Vladislav (author)
/
Milčić, Miodrag (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 9
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1723 kB)
1. TXT document (33 kB)
Trajectory-tracking control for manipulators based on fuzzy equivalence and a terminal sliding mode
Contibutors:
Liu, Youyu (author)
/
Li, Yi (author)
/
Zhang, Xuyou (author)
/
Chen, Bo (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 9
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (4228 kB)
1. TXT document (44 kB)
Active vibration control of a mechanical servo high-speed fine-blanking press
Contibutors:
Liu, Yanxiong (author)
/
Shu, Yuwen (author)
/
Hu, Wentao (author)
/
Zhao, Xinhao (author)
/
Xu, Zhicheng (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 9
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (3724 kB)
1. TXT document (43 kB)
Effectiveness of automatic cam programming using machining templates for the manufacture of speci...
Contibutors:
Kowalski, Maciej (author)
/
Zawadzki, Przemysław (author)
/
Hamrol, Adam (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 10
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1722 kB)
1. TXT document (54 kB)
Fault diagnosis of rotation vector reducer for industrial robot based on a convolutional neural n...
Contibutors:
Yang, Shuai (author)
/
Luo, Xing (author)
/
Li, Chuan (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 10
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (2585 kB)
1. TXT document (42 kB)
Response analysis of a scraper conveyor under chain faults based on MBD-DEM-FEM
Contibutors:
Wang, Zisheng (author)
/
Li, Bo (author)
/
Liang, Chao (author)
/
Wang, Xuewen (author)
/
Li, Jiahao (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 10
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (6406 kB)
1. TXT document (46 kB)
Investigation on the depth of slip hanger teeth bite into casing and the mechanical properties of...
Contibutors:
Chen, Yong (author)
/
Tan, Jinjin (author)
/
Xiao, Guoping (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 10
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (2391 kB)
1. TXT document (32 kB)
Optimization of laser parameters and dimple geometry using PCA-coupled gRG
Contibutors:
Kandasamy Ganesan, Saravanan (author)
/
Thanigaivelan, Rajasekaran (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 10
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (916 kB)
1. TXT document (34 kB)
Mechanical characterization and structural attributes of biohybrid composites derived using hemp,...
Contibutors:
Bose, Rajmohan (author)
/
Kandavel, Arunachalam (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 10
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (4476 kB)
1. TXT document (44 kB)
Performance study of EDM process parameters using TiC/ZrSiO sub 4 particulate-reinforced copper c...
Contibutors:
Saminatharaja, Duraisivam (author)
/
Suresh, Periyakgounder (author)
/
Selvaraj, Mahalingam (author)
/
Elangandhi, Jamuna (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 11
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (2781 kB)
1. TXT document (43 kB)
A method for calculating elliptic gear transmission efficiency based on transmission experiment
Contibutors:
Dong, Changbin (author)
/
Liu, Yongping (author)
/
Zhao, Gang (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 11
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (3645 kB)
1. TXT document (39 kB)
Electro-hydraulic drive of the variable ratio lifting device under active load
Contibutors:
Kosucki, Andrzej (author)
/
Stawiński, Łukasz (author)
/
Morawiec, Adrian (author)
/
Goszczak, Jarosław (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 11
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (3530 kB)
1. TXT document (45 kB)
Applicability of MCDM algorithms for the selection of phase change materials for thermal energy s...
Contibutors:
Felix, Paul Gregory (author)
/
Rajagopal, Velavan (author)
/
Kumaresan, Kannan (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 11
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (814 kB)
1. TXT document (43 kB)
Investigation of hydrodynamic flow characteristics in helical coils with ovality and wrinkles
Contibutors:
Periasamy, Govindaraj (author)
/
Mouleeswaran, Senthilkumar (author)
/
Venugopal, Prabhu Raja (author)
/
Perumal, Chellapandi (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 11
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (3676 kB)
1. TXT document (35 kB)
Synchronization and stability of a three co-rotating rotor system coupled with springs in a non-r...
Contibutors:
Du, Mingjun (author)
/
Hou, Yongjun (author)
/
Tang, Tong (author)
/
Tang, Lian (author)
/
Wang, Jialong (author)
/
Gao, Hongbo (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 11
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (4826 kB)
1. TXT document (65 kB)
Strojniški vestnik (2021, volume 67, issue 12)
Source:
Strojniški vestnik
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (4247 kB)
1. TXT document (342 kB)
Study of Bondura® expanding PIN system
Contibutors:
Akhtar, Muhammad Maaz (author)
/
Karlsen, Oyvind (author)
/
Lemu, Hirpa G. (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 12
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (827 kB)
1. TXT document (38 kB)
Modelling and multi-objective optimization of elastic abrasive cutting of C45 and 42Cr4 steels
Contibutors:
Stefanova Aleksandrova, Irina (author)
/
Stoynova, Anna (author)
/
Aleksandrov, Anatoliy (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 12
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1111 kB)
1. TXT document (63 kB)
Investigation of cutting performance of a circular saw blade based on ANSYS/LS-DYNA
Contibutors:
Wang, Zhiwen (author)
/
Zeng, Qingliang (author)
/
Lu, Zhenguo (author)
/
Wan, Lirong (author)
/
Zhang, Xin (author)
/
Liu, Zhihai (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 12
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1596 kB)
1. TXT document (59 kB)
Review of peridynamics
Contibutors:
Ladányi, Gábor (author)
/
Gonda, Viktor (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 12
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (505 kB)
1. TXT document (79 kB)
Extremal-micro genetic algorithm model for time-cost optimization with optimal labour productivity
Contibutors:
Sivakumar, A. (author)
/
Bagath Singh, N. (author)
/
Sathiamurthi, P (author)
/
Karthi Vinith, K. S. (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 12
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (368 kB)
1. TXT document (43 kB)
An investigation on laser welding parameters on the strength of TRIP steel
Contibutors:
Rahul, Khot S. (author)
/
Rao, T. Venkateshwara (author)
/
Harshad, Natu (author)
/
Girish, H. N. (author)
/
Ishigaki, Tadashi (author)
/
Madhusudan, Puttaswamy (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 1/2
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1829 kB)
1. TXT document (35 kB)
Dynamic analysis of hydraulic support with single clearance
Contibutors:
Zeng, Qingliang (author)
/
Li, Yangyang (author)
/
Zhang, Yang (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 1/2
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (2968 kB)
1. TXT document (47 kB)
Strojniški vestnik (2021, volume 67, issue 1/2)
Source:
Strojniški vestnik
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (5404 kB)
1. TXT document (297 kB)
Residual stress and deformation analysis in machining split straight bevel gears
Contibutors:
Wang, Bin (author)
/
Yan, Chenxiao (author)
/
Li, Jubo (author)
/
Feng, Peiyao (author)
/
Wang, Shuaipu (author)
/
Chen, Shuo (author)
/
Su, Jianxin (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 3
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (3193 kB)
1. TXT document (36 kB)
Flat specimen shape recognition based on full-field optical measurements and registration using m...
Contibutors:
Maček, Andraž (author)
/
Urevc, Janez (author)
/
Halilovič, Miroslav (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 5
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (3120 kB)
1. TXT document (43 kB)
Reduction of stresses and mass of an engine rubber mount subject to mechanical vibrations
Contibutors:
Dávalos, Omar (author)
/
Caldino-Herrera, Uzziel (author)
/
Cornejo-Monroy, Delfino (author)
/
Tenango-Pirin, Oscar (author)
/
García, Juan Carlos (author)
/
Basurto-Pensado, M. A. (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 3
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (2651 kB)
1. TXT document (50 kB)
Strojniški vestnik (2021, volume 67, issue 3)
Source:
Strojniški vestnik
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (4773 kB)
1. TXT document (260 kB)
Optimization of running blade prosthetics utilizing crow search algorithm assisted by artificial ...
Contibutors:
Rosel Solis, Nanuel Javier (author)
/
Dávalos Ramírez, José Omar (author)
/
Molina Salazar, Javier (author)
/
Ruiz Ochoa, Juan Antonio (author)
/
Gómez Roa, Antonio (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 3
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1836 kB)
1. TXT document (53 kB)
Strojniški vestnik (2021, volume 67, issue 6)
Source:
Strojniški vestnik
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (3393 kB)
1. TXT document (276 kB)
Hot incremental forming of biocomposites developed from linen fibres and a thermoplastic matrix
Contibutors:
Torres, Sandino (author)
/
Ortega, Roberto (author)
/
Acosta, Pablo (author)
/
Calderón, Edisson (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 3
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1607 kB)
1. TXT document (37 kB)
Strojniški vestnik (2021, volume 67, issue 5)
Source:
Strojniški vestnik
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (3566 kB)
1. TXT document (304 kB)
Strojniški vestnik (2021, volume 67, issue 4)
Source:
Strojniški vestnik
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (4779 kB)
1. TXT document (284 kB)
Operating performance of external non-involute spur and helical gears
Contibutors:
Okorn, Ivan (author)
/
Nagode, Marko (author)
/
Klemenc, Jernej (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 5
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1576 kB)
1. TXT document (71 kB)
Optimization of a self-excited pulsed air-water jet nozzle based on the response surface methodology
Contibutors:
Wang, Yong (author)
/
Wang, Xiaolin (author)
/
Zhang, Zilong (author)
/
Li, Yu (author)
/
Liu, Houlin (author)
/
Zhang, Xiang (author)
/
Hočevar, Marko (author)
Source:
Strojniški vestnik
Numbering: 2021, volume 67,
issue 3
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (3870 kB)
1. TXT document (51 kB)
page
of 1
hits per page:
5
10
25
50
100