The mechanical and corrosion properties of a twin-roll cast Al-Fe-Si aluminum alloy with 0.74 % Fe and 0.52 % Si (AA8011) were investigated. The influence of the thermo-mehanical processing route on the mechanical behavior of AA8011 sheets was determined. Comparisons were made with AA3003 and A199.5 sheets. The restoration of the mechanical properties was used in the analysis of the recrystallization behavior of the twin-roll cast AA8011 alloy deformed under cold-working conditions and subsequently annealed. The effect of the cold rolling-annealing combination on the deep drawing properties is presented. The corrosion properties were determined using accelerated corrosion-testing methods and compared to the properties of the A199.5 sheets.

Rights

URN

URN:NBN:SI:DOC-6TBRKJJ8

COBISSID

544938

Added

16.09.2009

Metadata

Citation

APA:

Dalijić, Kemal, Asanović, Vanja, Radonjić, Dragan (2006). Mechanical and corrosion properties of AA8011 sheets and foils. Materiali in tehnologije, volume 40, issue 3, str. 83-88. URN:NBN:SI:DOC-6TBRKJJ8 from http://www.dlib.si

MLA:

Dalijić, Kemal, Asanović, Vanja, Radonjić, Dragan. "Mechanical and corrosion properties of AA8011 sheets and foils." Materiali in tehnologije volume 40. issue 3 (2006) str. 83-88.
<http://www.dlib.si/?URN=URN:NBN:SI:DOC-6TBRKJJ8>

Materiali in tehnologije
2000-
(Assembly record)