In this study, the effect of sheet thickness on the anisotropy and thickness distribution at room temperature (RT) was investigated for AA2024-T4 sheets. The anisotropy was determined using automated strain measurement with a grid analysis and profile-projector methods. The results indicate that the effects of the thicknesses of 0.8 mm, 1 mm, and 2 mm on the anisotropy were insignificant. In addition to the anisotropy measurement, the thickness variation of the specimens was also monitored. Besides the anisotropy values, no significant differences were observed between various thicknesses and directions.

Rights

URN

URN:NBN:SI:DOC-FJOLVTWM

COBISSID

1019050

Added

14.02.2015

Metadata

Citation

APA:

Dilmec, Murat, Selcuk Halkaci, Huseyin, Ozturk, Fahrettin, Turkoz, Mevlut (2013). Effect of sheet thickness on the anisotropy and thickness distribution for AA2024-T4. Materiali in tehnologije, volume 47, issue 5, str. 605-610. URN:NBN:SI:DOC-FJOLVTWM from http://www.dlib.si

MLA:

Dilmec, Murat, Selcuk Halkaci, Huseyin, Ozturk, Fahrettin, Turkoz, Mevlut. "Effect of sheet thickness on the anisotropy and thickness distribution for AA2024-T4." Materiali in tehnologije volume 47. issue 5 (2013) str. 605-610.
<http://www.dlib.si/?URN=URN:NBN:SI:DOC-FJOLVTWM>

Materiali in tehnologije
2000-
(Assembly record)

Effect of sheet thickness on the anisotropy and thickness distribution for AA2024-T4Vpliv debeline pločevine na anizotropijo in razporeditev debeline pri AA2024-T4

Effect of sheet thickness on the anisotropy and thickness distribution for AA2024-T4
Vpliv debeline pločevine na anizotropijo in razporeditev debeline pri AA2024-T4