Digitalna knjižnica Slovenije

1. PDF document (1380 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (79 kB)

Application of the Taguchi method to optimize the cutting conditions in hard turning of a ring bore

Contibutors: Boy, Mehmet (author) / Ciftci, Ibrahim (author) / Gunay, Mustafa (author) / Ozhan, Feridun (author)

Analysis of the cutting temperature and surface roughness during the orthogonal machining of AISI...

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (415 kB)

1. TXT document (34 kB)

Contibutors: Motorcu, Ali Riza (author) / Isik, Yahya (author) / Kus, Abdil (author) / Cakir, Mustafa Cemal (author)

Optimising the effect of cutting parameters on the average surface roughness in a turning process...

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (821 kB)

1. TXT document (40 kB)

Contibutors: Akkuş, Harun (author)

Optimization of machining parameters in turning of hybrid aluminium-matrix (LM24-SiCp-coconut she...

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (287 kB)

1. TXT document (22 kB)

Contibutors: Arulraj, Munusamy (author) / Ponnusamy, Kumaraswamy Palani (author) / Venkatesh, Lakshmikanthan (author)

Multi-objective optimization of the cutting forces in turning operations using the Grey-based Tag...

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (880 kB)

1. TXT document (31 kB)

Contibutors: Kazancoglu, Yugut (author) / Esme, Ugur (author) / Bayramoglu, Melih (author) / Guven, Onur (author) / Ozgun, Sueda (author)

Application of the Taguchi method to select the optimum cutting parameters for tangential cylindr...

Numbering: 2011, volume 45, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (192 kB)

1. TXT document (25 kB)

Contibutors: Ozay, Cetin (author) / Ballikaya, Hasan (author) / Savas, Vedat (author)

Application of a Taguchi-based neural network for forecasting and optimization of the surface rou...

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (812 kB)

1. TXT document (34 kB)

Contibutors: Kazancoglu, Yugut (author) / Esme, Ugur (author) / Kulekci, Mustafa Kemal (author) / Kahraman, Funda (author) / Samur, Ramazan (author) / Akkurt, Adnan (author) / Ipekci, Melih Turan (author)

Optimization of the turning parameters for the cutting forces in the Hastelloy X superalloy based...

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (273 kB)

1. TXT document (24 kB)

Contibutors: Altin, Abdullah (author)

Optimization of the surface roughness by applying the Taguchi technique for the turning of stainl...

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (230 kB)

1. TXT document (26 kB)

Contibutors: Sarikaya, Murat (author)

1. PDF document (1093 kB)

Numbering: 2015, volume 49, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (38 kB)

Optimization of the machining parameters for the turning of 15-5 PH stainless steels using the Ta...

Contibutors: Çetin, Şerif (author) / Kivak, Turgay (author)

1. PDF document (1238 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Determination of the cutting-tool performance of high-alloyed white cast iron (Ni-Hard 4) using t...

Contibutors: Kir, Durmuş (author) / Öktem, Hasan (author) / Çöl, Mustafa (author) / Koç, Funda Gül (author) / Erzincanli, Fehmi (author)

1. PDF document (1430 kB)

Numbering: 2016, volume 50, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Investigation of a tool and workpiece machined using a nickel-nanocoated insert

Contibutors: Manoj, Sureshkumar (author) / Gandhi, Veeramalai Chinnasamy Sathish (author)

Investigation of the cutting forces and surface roughness in milling carbon-fiber-reinforced poly...

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (657 kB)

1. TXT document (20 kB)

Contibutors: Bayraktar, Senol (author) / Turgut, Yakup (author)

1. PDF document (1131 kB)

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (47 kB)

Hybrid Taguchi method for optimizing flux cored arc weld parameters for mild steel

Contibutors: Satheesh, M. (author) / Dhas, J. Edwin Raja (author)

Source: Advances in production engineering and management

Numbering: 2014, volume 9, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (419 kB)

1. TXT document (26 kB)

Optimization of the die-sinking micro-EDM process for multiple performance characteristics using ...

Contibutors: Kadirvel, Arumugam (author) / Hariharan, Pillai (author)

Optimization of the parameters for the surfactant-added EDM of a Ti-6Al-4V alloy using the GRA-Ta...

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (142 kB)

1. TXT document (27 kB)

Contibutors: Kolli, Murahari (author) / Adepu, Kumar (author)

Optimization of the drilling parameters for the cutting forces in B4C-reinforced Al-7XXX-series a...

Numbering: 2016, volume 50, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (730 kB)

1. TXT document (48 kB)

Contibutors: Taşkesen, Ahmet (author) / Kütükde, Kenan (author)

Numbering: 2013, volume 47, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (596 kB)

Effects of an addition of coir-pith particles on the mechanical properties and erosive-wear behav...

Contibutors: Jose, Arul Sujin (author) / Athijayamani, Ayyanar (author) / Ramanathan, Kalimuthu (author) / Sidhardhan, Susaiyappan (author)

Application of Grey relation analysis (GRA) and Taguchi method for the parametric optimization of...

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (805 kB)

1. TXT document (57 kB)

Contibutors: Aydin, Hakan (author) / Bayram, Ali (author) / Esme, Ugur (author) / Kazancoglu, Yugut (author) / Guven, Onur (author)

Use of Grey based Taguchi method in ball burnishing process for the optimization of surface rough...

Numbering: 2010, volume 44, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (398 kB)

1. TXT document (25 kB)

Contibutors: Esme, Ugur (author)

Evaluation of the surface roughness and geometric accuracies in a drilling process using the Tagu...

Numbering: 2010, volume 44, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (408 kB)

1. TXT document (27 kB)

Contibutors: Kabakli, Evren (author) / Bayramoglu, Melih (author) / Geren, Necdet (author)

Analysis of process parameters for a surface-grinding process based on the Taguchi method

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (239 kB)

1. TXT document (35 kB)

Contibutors: Külekci, Mustafa Kemal (author)

Optimization of the process parameters for surface roughness and tool life in face milling using ...

Numbering: 2013, volume 47, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (274 kB)

1. TXT document (19 kB)

Contibutors: Sarikaya, Murat (author) / Dilipak, Hakan (author) / Gezgin, Akin (author)

Optimization of surface roughness in finish milling of AISI P20+S plastic-mold steel

Numbering: 2015, volume 49, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (902 kB)

1. TXT document (39 kB)

Contibutors: Kara, Fuat (author)

Parametric optimization of the output shaft of a portal axle using finite element analysis

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (679 kB)

1. TXT document (28 kB)

Contibutors: Ooi, Jong Boon (author) / Wang, Xin (author) / Lim, Ying Pio (author) / Tan, ChingSeong (author) / Ho, Jee-Hou (author) / Wong, Kok-Cheong (author)

1. PDF document (1568 kB)

Numbering: 2013, volume 59, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (24 kB)

Experimental analysis of the deviation from circularity of bored hole based onthe Taguchi method

Contibutors: Korkut, Ihsan (author) / Kucuk, Yilmaz (author)

Taguchi-based and intelligent optimisation of a multi-response process using historical data

Numbering: 2010, volume 56, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (154 kB)

1. TXT document (23 kB)

Contibutors: Šibalija, Tatajana (author) / Majstorović, Vidosav D. (author) / Soković, Mirko (author)

Numbering: 2011, volume 57, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (379 kB)

Application of Taguchi method for surface roughness and roundness error in drilling of AISI 316 s...

Contibutors: Çiçek, Adem (author) / Kivak, Turgay (author) / Samtaş, Gürcan (author)

Cutting forces and surface roughness in face-milling of SKD61 hard steel

Numbering: 2012, volume 58, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (776 kB)

1. TXT document (40 kB)

Contibutors: Hoang, Tien Dung (author) / Nguyen, Nhu-Tung (author) / Tran, Đuc Quy (author) / Nguyen, Van Thien (author)

1. PDF document (2993 kB)

Numbering: 2019, volume 65, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (43 kB)

Estimating the strain-rate dependent parameters of Cowper-Symonds and Johnson-Cook material model...

Contibutors: Škrlec, Andrej (author) / Klemenc, Jernej (author)

1. PDF document (2539 kB)

Numbering: 2016, volume 62, nr. 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (39 kB)

The optimization of machining parameters using the Taguchi method for surface roughness of AISI 8...

Contibutors: Motorcu, Ali Riza (author)

Effect of solid state fermentation medium optimization on Pleurotus ostreatus laccase production

Numbering: 2010, volume 56, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (233 kB)

1. TXT document (36 kB)

Contibutors: Belšak, Nataša (author) / Gregori, Andrej (author) / Leitgeb, Maja (author) / Klinar, Dušan (author) / Čelan, Štefan (author)

Source: Acta chimica slovenica

Numbering: 2015, volume 62, issue 4

Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)

1. PDF document (128 kB)

Multi-objective optimization of the resistance spot-welding process parameters for the welding of...

Contibutors: Djuric, Aleksija (author) / Milčić, Dragan (author) / Klobčar, Damjan (author) / Marković, Biljana (author)

1. PDF document (2770 kB)

Numbering: 2021, volume 55, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (1 kB)

Experimental design of crystallization processes using Taguchi method

Contibutors: Hvalec, Miran (author) / Goršek, Andreja (author) / Glavič, Peter (author)

Source: Acta chimica slovenica

Numbering: 2004, volume 51, issue 2

Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)

1. PDF document (702 kB)

1. TXT document (26 kB)

Biodecolorization of azo dye Acid Blue 92 (AB92) by Ceratophyllum demersum L.

Contibutors: Eftekhari, Zahra (author) / Norastehnia, Akbar (author) / Masoudian, Zahra (author)

Source: Acta agriculturae Slovenica

Numbering: 2023, volume 119, issue 2

Provider: Univerza v Ljubljani, Biotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (862 kB)

1. TXT document (54 kB)

Statistical modelling and optimization of TIG welding process parameters using Taguchi’s method

Contibutors: Omprakasam, S. (author) / Marimuthu, Kathiresan (author) / Raghu, R. (author) / Velmurugan, T. (author)

1. PDF document (4659 kB)

Numbering: 2022, volume 68, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Production of the design developed to assembly filter parts, optimization of welding and field test

Contibutors: Maden, Hakan (author) / Cetinkaya, Kerim (author)

1. PDF document (2350 kB)

Numbering: 2022, volume 68, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (51 kB)

Effect of laser parameters on surface texture of polyformaldehyde and parameter optimization

Contibutors: Li, Fengren (author) / Li, Chao (author) / Zhou, Juan (author) / He, Jiantao (author) / Wang, Jiebin (author) / Luo, Cong (author) / Li, Si (author)