dLib.si - orodja

Influence of the tool rotational speed on the microstructure and joint strength of friction-stir ...

Numbering: 2008, volume 42, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (940 kB)

1. TXT document (15 kB)

Contibutors: Dinaharan, Isaac (author) / Akinlabi, Esther T. (author)

1. PDF document (3469 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (22 kB)

Površinska obdelava orodij za hladno oblikovanje

Contibutors: Legat, Franc (author)

Effects of cutting parameters and tool-path strategies on tool acceleration in ball-end milling

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (20 kB)

1. TXT document (7 kB)

Contibutors: Gok, Arif (author) / Gök, Kadir (author) / Bilgin, Mehmet Burak (author) / Alkan, Mehmet Ali (author)

1. PDF document (1380 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (79 kB)

Tankoplastne prevleke za zaščito orodij za tlačno litje plastike

Contibutors: Tasevski, M. (author)

Computer tools to determine physical parameters in wooden houses

Numbering: 1993, volume 27, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (705 kB)

1. TXT document (19 kB)

Contibutors: Bečkovský, David (author) / Vajkay, František (author) / Tichomirov, Vladimír (author)

Investigation of the mechanical properties of AlSi9Cu3(Fe)/MWCNT nanocomposites prepared by HPDC

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (604 kB)

1. TXT document (17 kB)

Contibutors: Špada, Vedrana (author) / Stanić, Davor (author) / Brnardić, Ivan (author)

1. PDF document (3032 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Experimental design and artificial neural network model for turning the 50CrV4 (SAE 6150) alloy u...

Contibutors: Tolga Ozkan, Murat (author) / Ulas, Hasan Basri (author) / Bilgin, Musa (author)

Računalniško orodje v okenskem okolju za izbiro in določitev tesnil na osnovi dveh različnih raču... (1997, volume 31, issue 3/4)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (517 kB)

1. TXT document (38 kB)

Contibutors: Bernard, Franc (author) / Borovničar, Ivan (author)

Provider: Narodna in univerzitetna knjižnica

1. PDF document (817 kB)

Effect of tool geometry and welding parameters on the microstructure and static strength of the f...

Contibutors: Abedini, Omid (author) / Ranjbarnodeh, Eslam (author) / Marashi, Seyed Pirooz Hoveida (author)

1. PDF document (3418 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Analysis of the cutting temperature and surface roughness during the orthogonal machining of AISI...

Contibutors: Motorcu, Ali Riza (author) / Isik, Yahya (author) / Kus, Abdil (author) / Cakir, Mustafa Cemal (author)

A geometrical approach to deriving a bushing height equation for thermal friction drilling

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (821 kB)

1. TXT document (40 kB)

Contibutors: Demir, Zülküf (author)

1. PDF document (2321 kB)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (42 kB)

Effect of cutting parameters on the drilling of AlSi7 metallic foams

Contibutors: Uzun, Gultekin (author) / Gokmen, Ugur (author) / Cinici, Hanifi (author) / Turker, Mehmet (author)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (924 kB)

The influence of tool wear on the chip-forming mechanism and tool vibrations

Contibutors: Antić, Aco (author) / Petrović, Petar B. (author) / Zeljković, Milan (author) / Kosec, Borut (author) / Hodolič, Janko (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (660 kB)

Wear mechanisms and surface engineering of forming tools

Contibutors: Podgornik, Bojan (author) / Leskovšek, Vojteh (author)

1. PDF document (1242 kB)

Numbering: 2015, volume 49, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (49 kB)

Influence of the tool geometry and process parameters on the static strength and hardness of fric...

Contibutors: Güler, Hande (author)

Numbering: 2015, volume 49, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (561 kB)

Investigation studies involving wear-resistant ALD/PVD hybrid coatings on sintered tool substrates

Contibutors: Staszuk, Marcin (author) / Pakula, Daniel (author) / Tański, Tomasz (author)

1. PDF document (2608 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (22 kB)

Analiza temperaturnega polja na delovni površini orodja za tlačno litje z uporabo termografije

Contibutors: Kosec, Borut (author) / Težak, Bojan (author) / Kosec, Ladislav (author) / Kopač, Janez (author) / Vojvodič-Tuma, Jelena (author)

The effect of the welding parameters and the coupling agent on the welding of composites

Numbering: 2000, volume 34, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (170 kB)

1. TXT document (14 kB)

Contibutors: Erdogan, Ertugrul Selcuk (author) / Huner, Umit (author)

Machinability of a Ti-6Al-4V alloy with cryogenically treated cemented carbide tools

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (872 kB)

1. TXT document (37 kB)

Contibutors: Mavi, Ahmet (author) / Korkut, Ihsan (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (899 kB)

Effect of the tool geometry and welding parameters on the macrostructure, fracture mode and weld ...

Contibutors: Bilici, Mustafa Kemal (author) / Yükler, Ahmet Ýrfan (author) / Kastan, Alim (author)

Preskušanje orodij, zaščitenih z različnimi površinskimi obdelavami, pri pogojih toplega preoblik...

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (860 kB)

1. TXT document (32 kB)

Contibutors: Urankar, Igor (author) / Panjan, Peter (author) / Terčelj, Milan (author) / Turk, Radomir (author) / Čekada, Miha (author) / Navinšek, Boris (author)

Numbering: 2003, volume 37, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (558 kB)

A high-efficiency automatic de-bubbling system for liquid silicone rubber

Contibutors: Kuo, Chil-Chyuan (author) / Huang, Chuan-Ming (author)

1. PDF document (1511 kB)

Numbering: 2016, volume 50, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (23 kB)

A novel process for the neutralization of NaOH at an aluminium semimanufactures production facility

Contibutors: Renko, Mija (author)

Napetostno žarjenje orodij podaljšuje njihovo življenjsko dobo

Numbering: 2001, volume 35, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (148 kB)

1. TXT document (21 kB)

Contibutors: Gnamuš, Janko (author)

Praktične izkušnje pri uporabi orodja za mrežno planiranje pri terminskem planiranju proizvodnje

Numbering: 1993, volume 27, issue 3

Provider: Narodna in univerzitetna knjižnica

1. PDF document (412 kB)

1. TXT document (9 kB)

Contibutors: Mrak, Marko (author) / Kern, Tomaž (author)

Numbering: 1998, volume 32, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (84 kB)

Increasing tool life during turning with a variable depth of cut

Contibutors: Sadílek, Marek (author) / Čep, Robert (author) / Sadílková, Zuzana (author) / Valiček, Jan (author) / Petřkovská, Lenka (author)

Matematično modeliranje rotacijskega litja - analiza termomehanskega stanja v orodju

Numbering: 2013, volume 47, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (738 kB)

1. TXT document (17 kB)

Contibutors: Štok, B. (author) / Mole, N. (author)

Development of numerical models for the heat-treatment-process optimisation in a closed-die forgi...

Numbering: 1993, volume 27, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (928 kB)

1. TXT document (23 kB)

Contibutors: Maleček, Ladislav (author) / Fedorko, Mikuláš (author) / Vančura, Filip (author) / Jirková, Hana (author) / Mašek, Bohuslav (author)

1. PDF document (1395 kB)

Numbering: 2015, volume 49, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (20 kB)

Determination of the cutting-tool performance of high-alloyed white cast iron (Ni-Hard 4) using t...

Contibutors: Kir, Durmuş (author) / Öktem, Hasan (author) / Çöl, Mustafa (author) / Koç, Funda Gül (author) / Erzincanli, Fehmi (author)

1. PDF document (1430 kB)

Numbering: 2016, volume 50, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (33 kB)

The impact of die angle on tool loading in the process of cold extruding steel

Contibutors: Randjelović, Saša (author) / Manić, Miodrag (author) / Trajanović, Miroslav (author) / Milutinović, Mladomir (author) / Movrin, Dejan (author)

Oplemenitenje orodij za stiskanje kovinskih prahov

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (720 kB)

1. TXT document (19 kB)

Contibutors: Torkar, Matjaž (author) / Leskovšek, Vojteh (author) / Šuštaršič, Borivoj (author) / Navinšek, Boris (author) / Bračko, Branko (author)

Digital imaging analysis of microstructures as a tool to identify local plastic deformation

Numbering: 1999, volume 33, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (258 kB)

1. TXT document (13 kB)

Contibutors: Suban, Marjan (author) / Cvelbar, Robert (author) / Bundara, Borut (author)

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (593 kB)

Investigation of a tool and workpiece machined using a nickel-nanocoated insert

Contibutors: Manoj, Sureshkumar (author) / Gandhi, Veeramalai Chinnasamy Sathish (author)

Izdelava rezilnih robov orodij z navarjanjem (1996, volume 30, issue 3/4)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (657 kB)

1. TXT document (20 kB)

Contibutors: Kejžar, Rajko (author) / Kosec, Ladislav (author)

Provider: Narodna in univerzitetna knjižnica

1. PDF document (845 kB)

Effect of cryogenic treatment applied to M42 HSS drills on the machinability of Ti-6Al-4V alloy

Contibutors: Kivak, Turgay (author) / Seker, Ulvi (author)

1. PDF document (1348 kB)

Numbering: 2015, volume 49, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (41 kB)

Cutting-tool recycling process with the zinc-melt method for obtaining thermal-spray feedstock po...

Contibutors: Altuncu, Ekrem (author) / Ustel, Fatih (author) / Turk, Ahmet (author) / Ozturk, Savas (author) / Erdogan, Garip (author)

1. PDF document (1067 kB)

Numbering: 2013, volume 47, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Optimization of the die-sinking micro-EDM process for multiple performance characteristics using ...

Contibutors: Kadirvel, Arumugam (author) / Hariharan, Pillai (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (142 kB)

Determination of the cause of the formation of transverse internal cracks on a continuously cast ...

Contibutors: Franěk, Zdeněk (author) / Masarik, Miloš (author) / Šmíd, Jaromír (author)

Analiza toplotnih razpok na orodjih za tlačno litje aluminija

Numbering: 2015, volume 49, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (545 kB)

1. TXT document (29 kB)

Contibutors: Klobčar, Damjan (author) / Tušek, Janez (author) / Pleterski, Matej (author) / Kosec, Ladislav (author) / Muhič, Mitja (author)

Numbering: 2008, volume 42, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (568 kB)

1. TXT document (28 kB)

Kovanje jekla v poltoplem stanju

Contibutors: Legat, Franc (author)

1. PDF document (1033 kB)

Numbering: 1999, volume 33, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. TXT document (15 kB)

FSW welding of Al-Mg alloy plates with increased edge roughness using square pin tools of various...

Contibutors: Baloš, Sebastian (author) / Šiđanin, Leposava P. (author) / Dramićanin, Miroslav D. (author) / Labus Zlatanović, Danka (author) / Antić, Aco (author)

1. PDF document (1870 kB)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Vpliv nitriranja na premene jekla X38CrMoV51

Contibutors: Legat, Franc (author)

Erosion of mold-steel surface oxidation and nitriding layers due to a die-casting aluminum alloy

Numbering: 1993, volume 27, issue 3

Provider: Narodna in univerzitetna knjižnica

1. PDF document (898 kB)

1. TXT document (20 kB)

Contibutors: Cao, Han-xue (author) / Liu, Yun-hao (author) / Shen, Chao (author) / Tang, Hao-xing (author) / Huang, Yan-yan (author) / Lei, Jia-le (author)

1. PDF document (1070 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Nova eksperimentalna metoda za določevanje obrabe orodij v laboratoriju (1997, volume 31, issue 5)

Contibutors: Nardin, Vladimir (author) / Terčelj, Milan (author) / Turk, Radomir (author) / Rodič, Tomaž (author)

Effect of pin profiles on the mechanical properties of friction-stir-welded AA5383 and AA7075

Provider: Narodna in univerzitetna knjižnica

1. PDF document (973 kB)

1. TXT document (21 kB)

Contibutors: Kumar, Madhan Pandy (author) / Anbumalar, Veerabathiran (author)

1. PDF document (1076 kB)

Numbering: 2020, volume 54, iss. 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Plasma nitriding of P/M M2 tool steel - structure and properties

Contibutors: Jurči, Peter (author) / Stolař, Pavel (author) / Hnilica, František (author) / Blaštík, Tomáš (author)

Numbering: 2003, volume 37, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (297 kB)

Cutting-tool performance in the end milling of carbon-fiber-reinforced plastics

Contibutors: Bílek, Ondřej (author) / Rusnakova, Sona (author) / Zaludek, Milan (author)

The effect of the cutting speed on the cutting forces and surface finish when milling chromium 21...

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (736 kB)

1. TXT document (17 kB)

Contibutors: Altin, Abdullah (author)

1. PDF document (1030 kB)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (24 kB)

Role of tool rotational speed in influencing microstructural evolution, residual-stress formation...

Contibutors: Sevvel, Pandian (author) / Satheesh, Chidambaram (author)