The proper operation of the high vacuum pumping system
Pravilno delovanje visokovakuumskega črpalnega sistema

tab1

1. PDF document (459 kB)

1. TXT document (10 kB)

Add to EndNote (RIS format)

Contibutor(s)

Gasperič, Jože (author)

Language

english

Source

Kovine zlitine tehnologije

Year

1997

Numbering

volume 31, issue 6

Publisher

Inštitut za kovinske materiale in tehnologije
Železarna Jesenice
Železarna Ravne
Železarna Štore

Provider

Narodna in univerzitetna knjižnica

Notes

The proper operation of high vacuum pumping system with oil diffusion pumps and backing rotary pumps is very important, otherwise the contamination of vacuum chambers by backstreaming oil vapours is extremely high as well as the oxidation and the loss of diffusion pump oil. The forepressure switching point, where the diffusion pump is put into the operation by opening the high vacuum and forepressure valves is discussed. There are three possible situations: the pumping throughput is just adapted, or it is too low or too high. What is going on, when the pumping throughput is adapted, it is ilustrated using the throughput-pressure diagram. At the end some practical advices are done, how to recognize that the operation of the HV pumping system is correct.

Rights

In Copyright

URN

URN:NBN:SI:doc-5RPR5YQA

COBISS ID

Added

22.07.2011

Metadata

tab1

tab1

tab1

tab1

Citation

APA:

Gasperič, Jože (1997). The proper operation of the high vacuum pumping system, volume 31, issue 6. URN:NBN:SI:doc-5RPR5YQA from http://www.dlib.si

MLA:

Gasperič, Jože. The proper operation of the high vacuum pumping system. Inštitut za kovinske materiale in tehnologije
Železarna Jesenice
Železarna Ravne
Železarna Štore, 1997.
<http://www.dlib.si/?URN=URN:NBN:SI:doc-5RPR5YQA>

Kovine zlitine tehnologije
1992-1999
(Assembly record)

prejšnja

Armirani spajkani spoji povečane žilavosti
1997
(Previous issue)

naslednja

Recent advances in synthesis of monosubstituted acetylene polymers
1997
(Next issue)