Digitalna knjižnica Slovenije

1. PDF document (1140 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Nekatere značilnosti jekel izvaljanih iz kontinuirno ulitih gredic

Contibutors: Kmetič, Dimitrij (author) / Vodopivec, Franc (author) / Vizjak, Ferdo (author) / Senčič, Srečko (author)

Source: Železarski zbornik

Numbering: 1979, volume 13, issue 3

Provider: Narodna in univerzitetna knjižnica

1. PDF document (1611 kB)

Primernost optičnih lastnosti slovenskih premogov za uplinjanje s koncentriranim sončnim sevanjem

Contibutors: Oman, Janez (author)

1. PDF document (1037 kB)

Numbering: 2004, volume 50, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (63 kB)

Understanding the mechanical properties of self-expandable stents

Contibutors: Yoshino, Daisuke (author) / Inoue, Katsumi (author) / Narita, Yukuhito (author)

1. PDF document (2664 kB)

Numbering: 2008, volume 54, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Mehanske lastnosti prepletenih polimernih mrež (1995, volume 29, issue 5/6)

Contibutors: Anžlovar, Alojz (author) / Anžur, Irena (author) / Malavašič, Tatjana (author)

Microstructure evolution and property changes of Al-Si-Cu alloy by controlling directional solidi...

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (516 kB)

1. TXT document (11 kB)

Contibutors: Yi, Xiaojie (author) / He, Tao (author) / Huo, Yuanming (author) / Chen, Shoushuang (author) / Xu, Yajun (author) / Mahamane Sani, Abdou Yahouza (author)

1. PDF document (1751 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (33 kB)

Structure and properties of AlMgSi alloys after ECAP and POST-ECAP ageing

Contibutors: Fujda, Martin (author) / Matvija, Miloš (author) / Kvačkaj, Tibor (author) / Milkovič, Ondrej (author) / Zubko, Pavol (author) / Nagyová, Katarína (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (259 kB)

Fizikalne in mehanske lastnosti svežega in osušenega lesa v bukovih deblih, izruvanih med žledolomom

Contibutors: Gorišek, Željko (author) / Plavčak, Denis (author) / Gornik Bučar, Dominika (author) / Merela, Maks (author) / Čufar, Katarina (author) / Straže, Aleš (author)

Source: Acta silvae et ligni

Numbering: 2017, issue 112

Provider: Gozdarski inštitut Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (1014 kB)

1. TXT document (55 kB)

The phenomenon of reduced plasticity in low-alloyed copper

Contibutors: Ozgowicz, Wojciech (author) / Kalinowska-Ozgowicz, Elżbieta (author) / Grzegorczyk, Barbara (author) / Lenik, Klaudiusz (author)

1. PDF document (5127 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Mechanical properties of a novel joint of a single-layer aluminum-alloy combined lattice-shell st...

Contibutors: Zhao, Caiqi (author) / Ma, Jun (author) / Du, Shengchen (author) / Gu, Ye (author) / Zhou, Yunwen (author)

1. PDF document (1819 kB)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (38 kB)

Effects of subzero treatments on the mechanical properties of the SAE 4140 steel

Contibutors: Sahin, Ismail (author) / Höke, Gürhan (author) / Cinici, Hanifi (author) / Findik, Tayfun (author) / Koralay, Haluk (author) / Arabaci, Ugur (author)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (644 kB)

Analitični model določevanja mehanskih lastnosti biopolimernih kompozitov - mikromehanski postopek

Contibutors: Hančič, Aleš (author) / Kosel, Franc (author) / Campos, A. R. (author) / Cunha, A.M. (author) / Gantar, Gašper (author)

Comparative mechanical and corrosion studies on magnesium, zinc and iron alloys as biodegradable ...

Numbering: 2007, volume 53, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (333 kB)

1. TXT document (50 kB)

Contibutors: Vojtěch, Dalibor (author) / Kubásek, Jiří (author) / Čapek, Jaroslav (author) / Pospíšilová, Iva (author)

Numbering: 2015, volume 49, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (719 kB)

Structural, mechanical and cytotoxicity characterization of as-cast biodegradable Zn-xMg (x = 0.8...

Contibutors: Kubásek, Jiří (author) / Pospíšilová, Iva (author) / Vojtěch, Dalibor (author) / Jablonská, Eva (author) / Ruml, Tomáš (author)

1. PDF document (2038 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Mechanical and microstructural properties of duplex steel (1997, volume 31, issue 6)

Contibutors: Gojić, Mirko (author) / Kosec, Ladislav (author) / Vehovar, Leopold (author)

1. PDF document (1004 kB)

Provider: Narodna in univerzitetna knjižnica

1. TXT document (16 kB)

Asymmetric rolling process

Contibutors: Fajfar, Peter (author) / Šalej, Alenka (author) / Kraner, Jakob (author) / Kugler, Goran (author)

Source: RMZ-materials and geoenvironment

Numbering: 2017, volume 64, issue 3

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (1192 kB)

Vpliv mase jekla in vrste sredstev za gašenje na mehanske lastnosti jekla

Contibutors: Grum, Janez (author) / Božič, Slavko (author) / Lavrič, Roman (author)

1. PDF document (2114 kB)

Numbering: 1999, volume 33, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. TXT document (41 kB)

Effect of quenching parameters on the mechanical properties of the 7A04 aluminium alloy

Contibutors: Shi, Dequan (author) / Kang, Kaijiao (author) / Gao, Guili (author)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (625 kB)

Effects of deformation temperature on the microstructure and mechanical properties of the AA3003 ...

Contibutors: Chen, Guiqing (author) / Fu, Gaosheng (author) / Lin, Xiaodong (author) / Song, Lili (author) / Cheng, Chaozeng (author) / Wei, Tianyun (author)

1. PDF document (1199 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Evolucija mikrostrukture mehkih jekel med valjanjem

Contibutors: Vodopivec, Franc (author) / Gabrovšek, Marin (author) / Žvokelj, Janez (author)

Source: Železarski zbornik

Numbering: 1986, volume 20, issue 3

Provider: Narodna in univerzitetna knjižnica

1. PDF document (1977 kB)

Effect of an electromagnetic field on the microstructure and properties of Cr(Ti)AlN hard coating...

Contibutors: Wang, Jin (author) / Ma, Dayan (author) / Liu, Qi (author) / Jin, Yetang (author) / Wang, Xu (author)

1. PDF document (1675 kB)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of the foaming precursor's composition and density on the foaming efficiency, microstru...

Contibutors: Kevorkijan, Varužan (author) / Škapin, Srečo D. (author) / Paulin, Irena (author) / Šuštaršič, Borivoj (author) / Jenko, Monika (author) / Lažeta, Marjana (author)

Effect of the skin-core morphology on the mechanical properties of injection-moulded parts

Numbering: 2011, volume 45, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (373 kB)

1. TXT document (41 kB)

Contibutors: Hnatkova, Eva (author) / Dvorak, Zdenek (author)

1. PDF document (1348 kB)

Numbering: 2016, volume 50, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Mechanical properties of bio-based concrete containing blended peach shell and apricot shell waste

Contibutors: Wu, Fan (author) / Liu, Changwu (author) / Sun, Wei (author) / Zhang, Lianwei (author)

1. PDF document (1005 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Microstructural considerations limiting the mechanical properties of HSLA steel (1996, volume 30, issue 6)

Contibutors: Parilák, L'udovít (author)

Experimental investigation of LM25 alloy reinforced with SiC, Gr and MOA particles

Provider: Narodna in univerzitetna knjižnica

1. PDF document (777 kB)

1. TXT document (16 kB)

Contibutors: Manickam, Dhanashekar (author) / Senthil Kumar, Velukkudi Santhanam (author) / Sivagnanam, Karthikeyan (author)

1. PDF document (1926 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Investigation of the mechanical properties of AlSi9Cu3(Fe)/MWCNT nanocomposites prepared by HPDC

Contibutors: Špada, Vedrana (author) / Stanić, Davor (author) / Brnardić, Ivan (author)

1. PDF document (3032 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of the bonding time on the microstructure and mechanical properties of a transient-liquid-...

Contibutors: Pouranvari, Majid (author) / Ekrami, Ali (author) / Kokabi, Amir Hossein (author)

1. PDF document (1745 kB)

Numbering: 2013, volume 47, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Naprave in postopki za pridobivanje nekaterih mehanskih lastnosti tal in izvedbo pedološke analiz...

Contibutors: Godeša, Tone (author) / Vrščaj, Borut (author)

Source: Hmeljarski bilten

Numbering: 2008, volume 15, issue 1

Provider: Inštitut za hmeljarstvo in pivovarstvo Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (686 kB)

Determination of mechanical and functional properties by continuous vertical cast NiTi rod

Contibutors: Stambolić, Aleš (author) / Jenko, Monika (author) / Kocijan, Aleksandra (author) / Žužek, Borut (author) / Drobne, Damjana (author) / Rudolf, Rebeka (author)

1. PDF document (1946 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

The coating of a NiTi alloy has a greater impact on the mechanical properties than the acidity of...

Contibutors: Pop Acev, Darko (author) / Katic, Visnja (author) / Turco, Gianluca (author) / Contardo, Luca (author) / Spalj, Stjepan (author)

Numbering: 2018, volume 52, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (268 kB)

Mechanical properties of polyamide/carbon-fiber-fabric composites

Contibutors: Ban, Cristina-Elisabeta (author) / Pelin, George (author) / Stefan, Adriana (author) / Andronescu, Ecaterina (author) / Dinca, Ion (author) / Ficai, Anton (author) / Truşca, Roxana (author)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (952 kB)

Vpliv vibriranja med varjenjem in po njem na mehanske lastnosti zvarov, zavarjenih v zaščiti močn...

Contibutors: Pučko, Bogdan (author)

Influence of technological factors on physical and mechanical properties of laminated prints

Numbering: 2000, volume 46, issue 11/12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (204 kB)

1. TXT document (32 kB)

Contibutors: Havenko, Svetlana (author) / Bogorosh, Aleksandr (author) / Martynyuk, Marija (author) / Kibirkštis, Edmundas (author) / Vaitasius, Kęstutis (author)

Numbering: 2008, volume 54, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (315 kB)

Effect of austempering temperature on microstructure and mechanical properties of unalloyed ducti...

Contibutors: Bošnjak, Branka (author) / Radulović, Branko (author)

Mehanske in termične lastnosti zamreženih poliestrov in poliestrskih kompozitov

Numbering: 1999, volume 33, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (499 kB)

1. TXT document (11 kB)

Contibutors: Rot, Katarina (author) / Huskić, Miroslav (author) / Makarovič, Matjaž (author) / Ljubič-Mlakar, Tanja (author) / Žigon, Majda (author)

Properties and structure of Cu-Ti-Zr-Ni amorphous powders prepared by mechanical alloying

Numbering: 2000, volume 34, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (72 kB)

1. TXT document (26 kB)

Contibutors: Guwer, Aleksandra (author) / Nowosielski, Ryszard (author) / Lebuda, Anna (author)

1. PDF document (2071 kB)

Numbering: 2015, volume 49, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Fracture properties of plain and steel-polypropylene-fiber-reinforced high-performance concrete

Contibutors: Smarzewski, Piotr (author) / Barnat-Hunek, Danuta (author)

1. PDF document (1297 kB)

Numbering: 2015, volume 49, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Vpliv značilnosti slovenskega smrekovega konstrukcijskega žaganega lesa na njegove mehanske lastn...

Contibutors: Šega, Bogdan (author)

Source: Les (Ljubljana)

Numbering: 2010, volume 62, issue 11/12

Provider: Zveza lesarjev Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (398 kB)

Mechanical and corrosion properties of AA8011 sheets and foils

Contibutors: Dalijić, Kemal (author) / Asanović, Vanja (author) / Radonjić, Dragan (author)

1. PDF document (1242 kB)

Numbering: 2006, volume 40, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (24 kB)

The influence of austenitising temperature on the microstructure and mechanical properties of low...

Contibutors: Radulović, Branko (author) / Bošnjak, Branka (author) / Harding, Richard (author) / Pop-Tonev, Kiro (author) / Asanovic, Vanja (author)

Odvijanje preje z navitka - obravnava kinematičnih in dinamičnih lastnosti preje

Numbering: 2000, volume 34, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (882 kB)

1. TXT document (23 kB)

Contibutors: Praček, Stanislav (author) / Jakšić, Danilo (author)

Characterisation of the mechanical and corrosive properties of newly developed glass-steel compos...

Numbering: 2005, volume 51, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (609 kB)

1. TXT document (59 kB)

Contibutors: Lyubimova, Olga (author) / Gridasova, Ekaterina (author) / Gridasov, Alexander (author) / Frieling, Gerrit (author) / Klein, Martin (author) / Walther, Frank (author)

1. PDF document (1543 kB)

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (21 kB)

Relatioship between fracture toughness and mechanical properties of some structural steels at low...

Contibutors: Ule, Boris (author) / Lovrečič Saražin, Marko (author) / Vojvodič-Tuma, Jelena (author) / Ažman, A. (author) / Lagoja, A. (author)

Multi-walled carbon nanotubes effect in polypropylene nanocomposites

Numbering: 1993, volume 27, issue 4

Provider: Narodna in univerzitetna knjižnica

1. PDF document (853 kB)

1. TXT document (26 kB)

Contibutors: Ban, Cristina-Elisabeta (author) / Stefan, Adriana (author) / Dinca, Ion (author) / Pelin, George (author) / Ficai, Anton (author) / Andronescu, Ecaterina (author) / Oprea, Ovidiu (author) / Voicu, Georgeta (author)

1. PDF document (1567 kB)

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Quasicrystal-strengthened cast Al-alloys

Contibutors: Zupanič, Franc (author) / Bončina, Tonica (author) / Rozman, Niko (author) / Markoli, Boštjan (author)

Source: RMZ-materials and geoenvironment

Numbering: 2011, volume 58, issue 1

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (696 kB)

Regression analysis of the influence of a chemical composition on the mechanical properties of th...

Contibutors: Gigović-Gekić, Almaida (author) / Oruč, Mirsada (author) / Avdušinović, Hasan (author) / Sunulahpašić, Raza (author)

Mechanical properties of CrN/Cr coatings with different thicknesses

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (577 kB)

1. TXT document (17 kB)

Contibutors: Čekada, Miha (author) / Panjan, Peter (author) / Kek-Merl, Darja (author) / Maček, Marijan (author)

Forming-limit diagrams and strain-rate-dependent mechanical properties of AA6019-T4 and AA6061-T4...

Numbering: 2003, volume 37, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (431 kB)

1. TXT document (17 kB)

Contibutors: Çavuşoglu, Onur (author) / Leacock, Alan Gordon (author) / Gürün, Hakan (author)

1. PDF document (1015 kB)

Numbering: 2016, volume 50, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Študija dinamičnih karakteristik sklopa radialnega rotorja in vležajenja ventilatorja hladilnega ...

Contibutors: Širok, Brane (author) / Hočevar, Marko (author) / Zupan, Samo (author) / Prebil, Ivan (author)

Apparatus for time-dependent measurements of mechanical properties under hydrostatic pressure

Numbering: 1999, volume 45, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (685 kB)

1. TXT document (34 kB)

Contibutors: Kralj, Aleš (author) / Prodan, Ted (author) / Emri, Igor (author)

Optimizing the formulation of e-glass fiber and cotton shell particles hybrid composites for thei...

Numbering: 1999, volume 33, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (175 kB)

1. TXT document (11 kB)

Contibutors: Annamalai, Manikandan (author) / Ramasubbu, Rajkumar (author)

1. PDF document (1117 kB)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

Influence of samarium on the microstructure and mechanical properties of Mg-Y-Zn-Zr alloys

Contibutors: Wang, Wenli (author) / Long, Yu-Qiu (author) / Jia, Jingda (author) / Yan, Xin (author) / Zhang, Wei (author)

1. PDF document (1593 kB)

Numbering: 2018, volume 52, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effects of technological parameters on the morphological, microstructural and mechanical behavior...

Contibutors: Li, Wen (author) / Sheng, Lei (author) / Xia, Yuanhao (author) / Amirfazli, Alidad (author) / Lu, Yalin (author)

1. PDF document (3340 kB)

Numbering: 2020, volume 54, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Electrochemical and mechanical properties of cobalt-chromium dental alloy joints

Contibutors: Zupančič, Rok (author) / Legat, Andraž (author) / Funduk, Nenad (author)

Numbering: 2007, volume 41, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (446 kB)

Study on the mechanical and radiation-shielding properties of borided AISI 304 stainless steels

Contibutors: Çalik, Adnan (author) / Karakaş, Serdar (author) / Uçar, Nazim (author) / Akkurt, Iskender (author) / Turhan, Adem (author)

Thermomechanical treatment of Ti-Nb-V-B micro-alloyed steel forgings

Numbering: 2013, volume 47, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (243 kB)

1. TXT document (14 kB)

Contibutors: Opiela, Marek (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (300 kB)

Molecular dynamics simulation of Ti-6Al-4V diffusion bonding behavior under different process par...

Contibutors: Liu, Xiaogang (author) / Xu, Lei (author) / Zhang, Sun (author)

1. PDF document (4917 kB)

Numbering: 2020, volume 54, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

Investigation of the mechanical properties of a squeeze-cast LM6 aluminium alloy reinforced with ...

Contibutors: Chelladurai, Samson Jerold Samuel (author) / Arthanari, Ramesh (author) / Krishnamoorthy, Kirubaharan (author) / Shankar Selvaraj, Kamal (author) / Govindan, Prabu (author)

1. PDF document (1727 kB)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Properties of thermally treated CuZn27Al3 shape memory alloy

Contibutors: Čorić, Danko (author) / Franz, Mladen (author)

1. PDF document (2611 kB)

Numbering: 2009, volume 55, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Analiza zvočnih lastnosti kompozitnih materialov

Contibutors: Šali, Samo (author) / Žnidarič, Uroš (author) / Kopač, Janez (author)

1. PDF document (1622 kB)

Numbering: 2004, volume 50, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (54 kB)

Influence of mechanical-alloying parameters on the structure and properties of Cu47Ti34Zr11Ni8

Contibutors: Nowosielski, Ryszard (author) / Guwer, Aleksandra (author) / Matus, Krzysztof (author)

1. PDF document (3372 kB)

Numbering: 2020, volume 54, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of fly-ash amount and cement type on the corrosion performance of the steel embedded in co...

Contibutors: Boga, Ahmet Raif (author) / Topçu, Ilker Bekir (author) / Öztürk, Murat (author)

Microstructure and mechanical properties of graphene-reinforced aluminum-matrix composites

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (386 kB)

1. TXT document (29 kB)

Contibutors: Du, Xiaoming (author) / Zheng, Kaifeng (author) / Liu, Fengguo (author)

1. PDF document (1283 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Mechanical properties of graphene-nanoparticle and carbon-nanotube-reinforced PE-matrix nanocompo...

Contibutors: Erden, Mehmet Akif (author) / Akgul, Yasin (author) / Kayabas, Ozge (author) / Ahlatci, Hayrettin (author) / Cetinkaya, Kerim (author) / Ozturk, Fatih Huzeyfe (author)

1. PDF document (1515 kB)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Basic physical, mechanical and electrical properties of electrically enhanced alkali-activated al...

Contibutors: Fiala, Lukáš (author) / Jerman, Miloš (author) / Rovnaník, Pavel (author) / Černý, Robert (author)

Microstructure, texture and mechanical properties of a friction-stir-processed Mg-Al-Ca-Mn-Zn alloy

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (999 kB)

1. TXT document (41 kB)

Contibutors: Song, Leipeng (author) / Zhang, Yang (author) / Lu, Yalin (author) / Li, Xingcheng (author) / Wang, Xu (author) / Wang, Jian (author) / Wang, Jiangtao (author)

1. PDF document (4173 kB)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of the tool geometry and process parameters on the static strength and hardness of fric...

Contibutors: Güler, Hande (author)

Local mechanical properties of irradiated cross-linked HDPE

Numbering: 2015, volume 49, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (561 kB)

1. TXT document (16 kB)

Contibutors: Hýlová, Lenka (author) / Maňas, David (author) / Manas, Miroslav (author) / Gajzlerova, Lenka (author) / Mizera, Ales (author)

Friction-stir welding of aluminium alloy 5083

Numbering: 2018, volume 52, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (325 kB)

1. TXT document (13 kB)

Contibutors: Klobčar, Damjan (author) / Kosec, Ladislav (author) / Pietras, Adam (author) / Smolej, Anton (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (321 kB)

Microstructure and mechanical properties of wire arc additive-manufacturing high-carbon chromium ...

Contibutors: Zhang, Wenjie (author) / Lei, Weining (author) / Zhang, Yang (author) / Liu, Xiao (author)

1. PDF document (3780 kB)

Numbering: 2020, volume 54, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of heat pre-treatment and extrusion on the structure and mechanical properties of WZ21 mag...

Contibutors: Dvorský, Drahomír (author) / Kubásek, Jiří (author) / Vojtěch, Dalibor (author) / Čavojský, Miroslav (author) / Minárik, Peter (author)

1. PDF document (1557 kB)

Numbering: 2018, volume 52, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Effect of Y2O3 and ZrO2 on the microstructructure and mechanical properties of nano-ODS 21Cr-9Mn-...

Contibutors: Kumar, Paleti Kishore (author) / Sai, Nimmagadda Vijaya (author) / Gopala Krishna, Alluru (author)

Numbering: 2018, volume 52, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (864 kB)

Measuring the viscoelastic properties of tissue using changes in its capacitance

Contibutors: Pavšelj, Nataša (author) / Cuznar, Primož (author) / Veselovskyi, Stanislav (author) / Miklavčič, Damijan (author) / Hart, Francis X. (author)

Source: Elektrotehniški vestnik

Numbering: 2016, volume 83, issue 3

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (715 kB)

Investigation of the mechanical properties of a cork/rubber composite

Contibutors: Kottner, Radek (author) / Kocáb, Jiří (author) / Heczko, Jan (author) / Krystek, Jan (author)

1. PDF document (1460 kB)

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (14 kB)

Možnosti stabilizacije preoblikovalnih lastnosti žice z ravnanjem med valji

Contibutors: Nastran, Miha (author) / Kuzman, Karl (author)

Optimization of the mechanical and tribological properties of extruded AMCs

Numbering: 2003, volume 49, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (688 kB)

1. TXT document (54 kB)

Contibutors: Shabani, Mohsen Ostad (author) / Tofigh, Ali Asghar (author) / Rahimipour, Mohammad Reza (author) / Razavi, Mansour (author) / Mazahéri, Aly (author) / Heydari, Fatemeh (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (350 kB)

Visokotrdne kalibrirane verige za dvigala in elevatorje

Contibutors: Kveder, Aleksander (author) / Legat, Franc (author) / Žvokelj, Janez (author)

Source: Železarski zbornik

Numbering: 1984, volume 18, issue 3

Provider: Narodna in univerzitetna knjižnica

1. PDF document (2018 kB)

Fuel properties of biodiesel produced from different raw materials in Croatia

Contibutors: Voća, Neven (author) / Krička, Tajana (author) / Janušić, Vanja (author) / Jukić, Željko (author) / Matin, Ana (author) / Kiš, Darko (author)

Effect of heat treatment on the microstructure and mechanical properties of martensitic stainless...

Numbering: 2008, volume 54, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (490 kB)

1. TXT document (48 kB)

Contibutors: Calik, Adnan (author) / Karakaş, Mustafa Serdar (author)

Characterization and determination of mechanical properties of YBCO superconducting thin films wi...

Numbering: 2013, volume 47, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (688 kB)

1. TXT document (19 kB)

Contibutors: Culha, Osman (author) / Birlik, Isil (author) / Toparli, Mustafa (author) / Celik, Erdal (author) / Engel, Sebastian (author) / Holzapfel, Bernhard (author)

Numbering: 2013, volume 47, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (471 kB)

Effects of prior annealing on the mechanical properties of a twist-extruded AA 7075 aluminum alloy

Contibutors: Sakthivel, Chandiran (author) / Kumar, Velkkudi Santhanam Senthil (author) / Iqbal, Usuff Mohammed (author)

1. PDF document (2038 kB)

Numbering: 2020, volume 54, iss. 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (29 kB)

Nano-indentation investigations of the mechanical properties of thin TiOsub2, WOsub3 and their co...

Contibutors: Cherneva, Sabina (author) / Iankov, Roumen (author) / Radic, Nenad (author) / Stoychev, Dimitar (author) / Datcheva, Maria (author)

Effect of preheating on mechanical properties in induction sintering of metal-powder material Fe ...

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (844 kB)

1. TXT document (50 kB)

Contibutors: Akpinar, Göksan (author) / Atik, Enver (author)

1. PDF document (3986 kB)

Numbering: 2015, volume 49, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

The effect of thermo-mechanical processing on the structure, static mechanical properties and fat...

Contibutors: Kubásek, Jiří (author) / Vojtěch, Dalibor (author) / Dvorský, Drahomír (author)

1. PDF document (3551 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (38 kB)

Effect of particles size on the mechanical properties of SiC-reinforced aluminium 8011 composites

Contibutors: Ashok, Nagaraj (author) / Shanmughasundaram, Palanisamy (author)

1. PDF document (1120 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of alloying elements on the mechanical properties of a cobalt-based alloy produced with...

Contibutors: Nová, Kateřina (author) / Novák, Pavel (author) / Dvorský, Drahomír (author)

1. PDF document (1692 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (21 kB)

Primerjava triboloških lastnosti mineralnih in repičnih mazalnih olj

Contibutors: Vižintin, Jože (author) / Arnšek, Aleš (author)

Numbering: 2001, volume 47, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (192 kB)

Microstructure, magnetic and mechanical properties of the bulk amorphous alloy Fe61Co10Ti4Y5B20

Contibutors: Bloch, Katarzyna (author) / Nabiałek, Marcin (author) / Gondro, Joanna (author)

Use of the ABI technique to measure the mechanical properties of aluminium alloys

Numbering: 2015, volume 49, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (555 kB)

1. TXT document (17 kB)

Contibutors: Trudonoshyn, Oleksandr (author) / Puchnin, Maxim (author) / Prach, Olena (author)

1. PDF document (1116 kB)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Study of the strengthening and toughening mechanism for single-crystal copper during equal-channe...

Contibutors: Guo, Ting-Biao (author) / Wei, Shi-Ru (author) / Li, Qi (author) / Wang, Cheng (author) / Jia, Zhi (author) / Hu, Yong (author) / Tang, Xing-Chang (author)

1. PDF document (3338 kB)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

The effect of EO and steam sterilization on the mechanical and electrochemical properties of tita...

Contibutors: Basiaga, Marcin (author) / Walke, Witold (author) / Paszenda, Zbigniew (author) / Kajzer, Anita (author)

Effect of mechanical activation on the synthesis of a magnesium aluminate spinel

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (820 kB)

1. TXT document (26 kB)

Contibutors: Kirsever, Derya (author) / Nilgün Kaya, Karabulut (author) / Canikoglu, Nuray (author) / ÖzkanToplan, Hüseyin (author)

1. PDF document (1394 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (13 kB)

Microstructure and mechanical properties of high-purity aluminum deformed with equal-channel angu...

Contibutors: Li, Lihua (author) / Wang, Jin (author) / Gao, Songsong (author)

1. PDF document (3179 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of the working technology on the development of alloys H13-w(Cu) 87.5 %

Contibutors: Artiček, Uroš (author) / Bojinović, Marko (author) / Brunčko, Mihael (author) / Anžel, Ivan (author)

1. PDF document (3355 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Mechanical properties of the austenitic stainless steel X15CrNiSi20-12 after recycling

Contibutors: Delić, Alen (author) / Kablar, Omer (author) / Zulić, Almir (author) / Kovačević, Džemal (author) / Hodžić, Nusmir (author) / Barčić, Enis (author)

1. PDF document (1499 kB)

Numbering: 2015, volume 49, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (15 kB)

Investigating the properties of dental composites

Contibutors: Nagode, Aleš (author) / Zupančič, Katja (author) / Zorc, Matija (author) / Žužek, Borut (author) / Karpe, Blaž (author) / Šetina, Barbara (author) / Zorc, Borut (author) / Kosec, Borut (author) / Bizjak, Milan (author) / Pavlič, Alenka (author)

1. PDF document (1408 kB)

Numbering: 2020, volume 54, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Modeling and experimental analysis of Al2219/n-TiC/Gr powder-based process parameters using desir...

Contibutors: Jeevanantham, Ponnusamy (author) / Kumaresan, Krishnasamy (author) / Noorbasha, Zeelanbasha (author)

1. PDF document (3913 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of dry-wet circulation on the mechanical properties and pore structure of autoclaved aerat...

Contibutors: He, Xiao (author) / Yin, Jian (author) / Yang, Jiewen (author) / Liang, Qiao (author) / Wu, Songyun (author)

1. PDF document (1223 kB)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

The influence of some parameters on the flow properties of bulk solids

Contibutors: Hann, Damjan (author)

1. PDF document (1026 kB)

Numbering: 2009, volume 55, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo