Digitalna knjižnica Slovenije

Heat treatment of electroless Ni-P layers on an austenitic stainless-steel substrate

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (159 kB)

1. TXT document (17 kB)

Contibutors: Maretić, Mauro (author) / Smoljan, Božidar (author) / Iljkić, Dario (author)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (948 kB)

Vpliv kemijske sestave in toplotne obdelave na lastnosti feritnega nerjavnega jekla za magnetne v...

Contibutors: Grešovnik, Ferdinand (author)

Preiskave jekla Č. 4850-OCR 12 VM na elektronskem mikroanalizatorju

Numbering: 2000, volume 34, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (138 kB)

1. TXT document (18 kB)

Contibutors: Rodič, Jože (author) / Vodopivec, Franc (author) / Ralić, Boško (author)

1. PDF document (2103 kB)

Numbering: 1976, volume 10, issue 3

Provider: Narodna in univerzitetna knjižnica

Effect of heat treatment on the microstructure and properties of Cr-V ledeburitic steel

Contibutors: Krum, Stanislav (author) / Sobotová, Jana (author) / Jurči, Petr (author)

Lomna žilavost K_{IC}, merilo za izbiro toplotne obdelave hitroreznih jekel

Numbering: 2010, volume 44, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (582 kB)

1. TXT document (17 kB)

Contibutors: Leskovšek, Vojteh (author) / Šuštaršič, Borivoj (author) / Večko Pirtovšek, Tatjana (author) / Grešovnik, Ferdinand (author) / Jutriša, Gorazd (author)

Numbering: 2002, volume 36, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (167 kB)

Influence of segregations on the fracture toughness Ksub{Ic} of high-strength spring steel

Contibutors: Senčič, Bojan (author) / Leskovšek, Vojteh (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (771 kB)

Effect of solution treatment on gamma-prime recovery in a creep-damaged directionally solidified ...

Contibutors: Xiao, Junfeng (author) / Tang, Wenshu (author) / Nan, Qing (author) / Gao, Sifeng (author) / Liu, Yongjun (author) / Zhang, Jiong (author)

1. PDF document (3983 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

Transformation-induced plasticity in steel for hot stamping

Contibutors: Mašek, Bohuslav (author) / Štádler, Ctibor (author) / Jirková, Hana (author) / Feuser, Peter (author) / Selig, Mike (author)

The effect of protective atmosphere on decarburisation of the heat-treated surface of steel

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (243 kB)

1. TXT document (14 kB)

Contibutors: Tonkovič-Prijanovič, Marica (author) / Knez, Miha (author)

1. PDF document (1064 kB)

Numbering: 2017, volume 64, issue 4

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

Preprečevanje izločanja vodnega kamna na površinah za magnetno obdelavo vode

Contibutors: Pristovnik, Andrej (author) / Črepinšek-Lipuš, Lucija (author) / Krope, Jurij (author)

Oxygen diffusion in the non-evaporable getter St 707 during heat treatment

Numbering: 2000, volume 46, issue 8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (224 kB)

1. TXT document (31 kB)

Contibutors: Avdiaj, Sefer (author) / Šetina, Barbara (author) / Šetina, Janez (author) / Erjavec, Bojan (author)

Heat treatment of cold formed steel forgings

Numbering: 2011, volume 45, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (841 kB)

1. TXT document (21 kB)

Contibutors: Kosec, Borut (author) / Brezigar, Matjaž (author) / Kosec, Gorazd (author) / Čevnik, Gabrijela (author) / Bizjak, Milan (author)

1. PDF document (1063 kB)

Numbering: 2009, volume 56, issue 3

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. TXT document (13 kB)

Heat treatment and fine-blanking Inconel 718

Contibutors: Česnik, Damir (author) / Bratuš, Vitoslav (author) / Kosec, Borut (author) / Rozman, Janez (author) / Bizjak, Milan (author)

Numbering: 2008, volume 55, issue 2

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (519 kB)

Effect of different surface-heat-treatment methods on the surface properties of AISI 4140 steel

Contibutors: Ayday, Aysun (author) / Durman, Mehmet (author)

Effect of heat pre-treatment and extrusion on the structure and mechanical properties of WZ21 mag...

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (886 kB)

1. TXT document (14 kB)

Contibutors: Dvorský, Drahomír (author) / Kubásek, Jiří (author) / Vojtěch, Dalibor (author) / Čavojský, Miroslav (author) / Minárik, Peter (author)

1. PDF document (1557 kB)

Numbering: 2018, volume 52, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

A modified heat treatment to improve the properties of double-layer cast rolls

Contibutors: Sedlaček, Marko (author) / Podgornik, Bojan (author) / Milanović, Slobodan (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (589 kB)

Corrosion resistance of as-plated and heat-treated electroless dublex Ni-P/Ni-B-W coatings

Contibutors: Yüksel, Behiye (author) / Erdogan, Garip (author) / Baştan, Fatih Erdem (author) / Yildiz, Ahmet (author)

1. PDF document (1369 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (50 kB)

Vpliv toplotne obdelave na raztapljanje in izločanje karbidov v ledeburitnih orodnih jeklih

Contibutors: Lavrič, Teja (author) / Grešovnik, Ferdinand (author) / Vodopivec, Franc (author) / Osterc, Valerija (author)

1. PDF document (1582 kB)

Numbering: 1980, volume 14, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. TXT document (39 kB)

The application of linear elastic fracture mechanics to optimize the vacuum heat treatment and ni...

Contibutors: Leskovšek, Vojteh (author) / Šuštaršič, Borivoj (author) / Nolan, James David (author)

Influence of the substrate hardness and fracture toughness on the dynamic wear properties of coat...

Numbering: 2006, volume 40, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (194 kB)

1. TXT document (30 kB)

Contibutors: Sedlaček, Marko (author) / Šetina, Barbara (author) / Česnik, Damir (author) / Podgornik, Bojan (author)

1. PDF document (2978 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (44 kB)

Visokotrdne kalibrirane verige za dvigala in elevatorje

Contibutors: Kveder, Aleksander (author) / Legat, Franc (author) / Žvokelj, Janez (author)

1. PDF document (2018 kB)

Numbering: 1984, volume 18, issue 3

Provider: Narodna in univerzitetna knjižnica

1. TXT document (44 kB)

Effect of heat treatment on the microstructure and mechanical properties of martensitic stainless...

Contibutors: Calik, Adnan (author) / Karakaş, Mustafa Serdar (author)

Surface treatment of heat-treated cast magnesium and aluminium alloys obdelava

Numbering: 2013, volume 47, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (688 kB)

1. TXT document (19 kB)

Contibutors: Tański, Tomasz (author) / Wiśniowski, Maciej (author) / Matysiak, Wiktor (author) / Staszuk, Marcin (author) / Szklarek, Radoslav (author)

1. PDF document (7745 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (32 kB)

Raziskave za termično obdelavo valjev iz indefinitne litine

Contibutors: Mlakar, Franc (author) / Tucić, V. (author)

1. PDF document (1200 kB)

Numbering: 1982, volume 16, issue 3

Provider: Narodna in univerzitetna knjižnica

Influence of warm rolling and heat treatment in the alpha-gamma area of a three-layer strip on th...

Contibutors: Beganović, Omer (author) / Hadžalić, Mustafa (author) / Kesić, Suvad (author)

1. PDF document (1031 kB)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Use of the ABI technique to measure the mechanical properties of aluminium alloys

Contibutors: Trudonoshyn, Oleksandr (author) / Puchnin, Maxim (author) / Prach, Olena (author)

1. PDF document (1116 kB)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Vpliv toplotne obdelave na mikrostrukturo in trdoto jekla X20CrMoV121

Contibutors: Skobir, Danijela (author) / Vodopivec, Franc (author) / Arzenšek, Boris (author)

Development of numerical models for the heat-treatment-process optimisation in a closed-die forgi...

Numbering: 1998, volume 32, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (198 kB)

1. TXT document (12 kB)

Contibutors: Maleček, Ladislav (author) / Fedorko, Mikuláš (author) / Vančura, Filip (author) / Jirková, Hana (author) / Mašek, Bohuslav (author)

1. PDF document (1395 kB)

Numbering: 2015, volume 49, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Heat treatment of a P/M tool steel containing an increased niobium content

Contibutors: Šerák, Jan (author) / Vojtěch, Dalibor (author) / Pavlíčková, Marketa (author) / Novák, Pavel (author)

Investigation of grain boundaries in alloy 263 after special heat treatment

Numbering: 2003, volume 37, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (234 kB)

1. TXT document (12 kB)

Contibutors: Slatkovský, Ivan (author) / Dománková, Mária (author) / Sahul, Martin (author)

1. PDF document (4910 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (47 kB)

The influence of the extrusion process and heat treatment on the properties of some AA6XXX extrud...

Contibutors: Delijić, Kemal (author) / Asanović, Vanja (author) / Radonjić, Dragan (author)

Numbering: 2005, volume 39, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (592 kB)

Reparaturno varjenje orodnih jekel

Contibutors: Gnamuš, J. (author) / Rihar, Gabriel (author)

Izbira in toplotna obdelava jekel za izdelavo orodij v industriji umetnih mas

Numbering: 1987, volume 21, issue 2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (687 kB)

1. TXT document (18 kB)

Contibutors: Sidan, Heribert (author) / Rodič, Jože (author)

1. PDF document (4048 kB)

Numbering: 1972, volume 6, issue 2

Provider: Narodna in univerzitetna knjižnica

1. TXT document (77 kB)

Heat treatment and mechanical properties of heavy forgings from A694-F60 steel

Contibutors: Balcar, Martin (author) / Novák, Jaroslav (author) / Sochor, Libor (author) / Fila, Pavel (author) / Martínek, Ludvík (author) / Bažan, Jiří (author) / Socha, Ladislav (author) / Skobir Balantič, Danijela Anica (author) / Godec, Matjaž (author)

Study of the properties and structure of selected tool steels for cold work depending on the para...

Numbering: 2011, volume 45, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (657 kB)

1. TXT document (11 kB)

Contibutors: Kuřík, Martin (author) / Lacza, Jakub (author) / Vlach, Tomáš (author) / Sobotová, Jana (author)

1. PDF document (1435 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Termomehanska obdelava zobatih vencev

Contibutors: Vodeb, Dušan (author) / Hrnčič, Vlado (author) / Grešovnik, Ferdinand (author) / Hrnčič, Sonja (author) / Ribič, Peter (author) / Veršnik, Franc (author)

Numbering: 2001, volume 35, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (398 kB)

Effect of heat treatment on the microstructure and mechanical properties of piston alloys

Contibutors: Manasijević, Srećko (author) / Marković, Srđan (author) / Aćimović-Pavlović, Zagorka (author) / Raić, Karlo (author) / Radiša, Radomir (author)

1. PDF document (2189 kB)

Numbering: 2013, volume 47, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (28 kB)

Decreasing the carbonitride size and amount in austenitic steel with heat treatment and thermomec...

Contibutors: Martinek, Petr (author) / Podaný, Pavel (author) / Nacházel, Jan (author)

1. PDF document (1661 kB)

Numbering: 2015, volume 49, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of heat treatment on the microstructure and mechanical properties of aluminium bronze

Contibutors: Sláma, Peter (author) / Dlouhý, Jaromír (author) / Kövér, Michal (author)

Analyzing the heat-treatment effect on the mechanical properties of free-cutting steels

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (586 kB)

1. TXT document (21 kB)

Contibutors: Kulekci, Mustafa Kemal (author) / Esme, Ugur (author) / Kahraman, Funda (author) / Ozgun, Rahim (author) / Akkurt, Adnan (author)

1. PDF document (1126 kB)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Vpliv toplotne obdelave in brušenja na zaostale notranje napetosti (1997, volume 31, issue 5)

Contibutors: Grum, Janez (author) / Žerovnik, Pavle (author) / Ferlan, Dimo (author)

1. PDF document (1542 kB)

Provider: Narodna in univerzitetna knjižnica

1. TXT document (31 kB)

Brzorezna jekla. Del 2, Velikost karbidov v brzorznih jeklih pred toplotno obdelavo

Contibutors: Rodič, Alenka (author) / Rodič, Jože (author)

1. PDF document (3750 kB)

Numbering: 1968, volume 2, issue 1

Provider: Narodna in univerzitetna knjižnica

1. TXT document (41 kB)

Heat treatment of rails

Contibutors: Hnizdil, Milan (author) / Kotrbacek, Petr (author)

1. PDF document (1111 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Izkušnje s homogenizacijo brzoreznih jekel

Contibutors: Rodič, Jože (author) / Rodič, Alenka (author)

1. PDF document (2655 kB)

Numbering: 1977, volume 11, issue 4

Provider: Narodna in univerzitetna knjižnica

1. TXT document (33 kB)

Multi-functional Ksub{Ic}-test specimen for the assessment of different tool- and high-speed-stee...

Contibutors: Leskovšek, Vojteh (author) / Podgornik, Bojan (author)

Influence of the heat treatment and extrusion process on the mechanical and microstructural prope...

Numbering: 2013, volume 47, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (773 kB)

1. TXT document (50 kB)

Contibutors: Steinacher, Matej (author) / Dragojevič, Vukašin (author) / Smolej, Anton (author)

1. PDF document (1214 kB)

Numbering: 2011, volume 58, issue 3

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

Analiza občutljivosti toplotne obdelave jekel

Contibutors: Batista, Milan (author) / Kosel, Franc (author)

Numbering: 2000, volume 46, issue 11/12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (276 kB)

1. TXT document (47 kB)

Popustna krhkost utopnega jekla

Contibutors: Ule, Boris (author) / Vodopivec, Franc (author) / Rodič, Alenka (author)

Toplotna obdelava visokokvalitetnih verig z indukcijo

Numbering: 1985, volume 19, issue 3

Provider: Narodna in univerzitetna knjižnica

1. PDF document (843 kB)

1. TXT document (21 kB)

Contibutors: Legat, Franc (author)

25 let vakuumske toplotne in kemotermične obdelave na Inštitutu za kovinske materiale in tehnolog...

Numbering: 2000, volume 34, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (576 kB)

1. TXT document (13 kB)

Contibutors: Leskovšek, Vojteh (author)

Effect of alternative heat-treatment parameters on the aging behavior of short-fiber-reinforced 2...

Numbering: 2010, volume 44, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (560 kB)

1. TXT document (36 kB)

Contibutors: Altunpak, Yahya (author) / Aslan, Serdar (author) / Oguz Güler, Mehmet (author) / Akbulut, Hatem (author)

Toplotna obdelava aluminijeve zlitine AlCuMgPb (AA2030) med indirektnim iztiskovanjem

Numbering: 2016, volume 50, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (673 kB)

1. TXT document (31 kB)

Contibutors: Smolej, Anton (author) / Dragojevič, Vukašin (author) / Kverh, Ida (author) / Soković, Mirko (author)

Iz dela metalografskega laboratorija. Želez

Numbering: 1998, volume 32, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (122 kB)

1. TXT document (17 kB)

Contibutors: Kosec, Ladislav (author) / Vodopivec, Franc (author)

The influence of the heat-treatment regime on a fracture surface of nickel-based supperalloys

Numbering: 1971, volume 5, issue 2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (749 kB)

1. TXT document (12 kB)

Contibutors: Milosavljević, Andjelka (author) / Petronić, Sanja (author) / Polic-Radovanovic, Suzana (author) / Babic, Jasmina (author) / Bajić, Darko (author)

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (635 kB)

Vpliv toplotne obdelave na statično nosilnost kotalnega stika (1997, volume 31, issue 1/2)

Contibutors: Drobnič, Katarina (author) / Prebil, Ivan (author)

Provider: Narodna in univerzitetna knjižnica

1. PDF document (765 kB)

Mehanske lastnosti zvara iz jekla maraging po izločevalnem žarjenju

Contibutors: Klobčar, Damjan (author) / Tušek, Janez (author)

Mechanical properties of high temperature vacuum brazed HSS on structural carbon steel with simul... (1996, volume 30, issue 6)

Numbering: 2007, volume 41, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (645 kB)

1. TXT document (25 kB)

Contibutors: Leskovšek, Vojteh (author) / Kmetič, Dimitrij (author) / Šuštaršič, Borivoj (author)

1. PDF document (1397 kB)

Provider: Narodna in univerzitetna knjižnica

Development of a heat treatment for increasing the mechanical properties and stress corrosion res...

Contibutors: Shakouri, Mehdi (author) / Shabestari, Saeed (author)

1. PDF document (1053 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (45 kB)

Effect of heat treatment and test temperature on fracture type of steel Nitronic 60

Contibutors: Gigović-Gekić, Almaida (author) / Oruč, Mirsada (author) / Nagode, Aleš (author) / Avdušinović, Hasan (author)

Improvement of selective copper extraction from a heat-treated chalcopyrite concentrate with atmo...

Numbering: 2011, volume 58, issue 3

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (644 kB)

1. TXT document (13 kB)

Contibutors: Uzun, Elif (author) / Zengin, Mustafa (author) / Atilgan, Ismail (author)

Mathematical model for an Al-coil temperature calculation during heat treatment

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (470 kB)

1. TXT document (36 kB)

Contibutors: Vode, Franci (author) / Tehovnik, Franc (author) / Burja, Jaka (author) / Arh, Boštjan (author) / Podgornik, Bojan (author) / Steiner Petrovič, Darja (author) / Malenšek, Matjaž (author) / Kočevar, Leonida (author) / Lažeta, Marjana (author)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (523 kB)

Corrosion characteristics of an additive-manufacturing cobalt-chrome-wolfram biomedical alloy und...

Contibutors: Aygul, Ebuzer (author) / Yalcinkaya, Senai (author) / Sahin, Yusuf (author)

Effect of heat treatment on the grain size, microhardness and corrosion behavior of the cold-work...

Numbering: 2020, volume 54, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (709 kB)

1. TXT document (27 kB)

Contibutors: Al-Qawabah, Safwan (author) / Ahmad, Mostafa (author) / Al-Rawajfeh, Aiman (author) / Al-Qawabeha, Ubeidulla (author)

Synthesis and physicochemical properties of an advanced BaO-MgO-Al2O3-SiO2 system as an attractiv...

Numbering: 2020, volume 54, iss. 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (905 kB)

1. TXT document (26 kB)

Contibutors: Ravaszová, Simona (author) / Dvořák, Karel (author) / Skalka, Petr (author) / Luna, Mariano Casas (author) / Jech, David (author) / Čelko, Ladislav (author)

Numbering: 2020, volume 54, iss. 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (662 kB)

The effect of heat treatment on the stability of centerline segregation

Contibutors: Reger, Mihaly (author) / Vero, Balazs (author) / Felde, Imre (author) / Kardos, Ibolya (author)

1. PDF document (1279 kB)

Numbering: 2010, volume 56, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Single-step heat treatment for the restoration of the mechanical properties of cold-strained mini...

Contibutors: Lojen, Gorazd (author) / Mayer, Janez (author) / Bončina, Tonica (author) / Zupanič, Franc (author)

1. PDF document (3815 kB)

Numbering: 2020, volume 66, iss. 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (45 kB)

Water and fire as transformation elements in ritual deposits of the Scandinavian neolithic

Contibutors: Larsson, Lars (author)

Source: Documenta Praehistorica

Numbering: 2011, volume 38, issue 38

Provider: Univerza v Ljubljani, Filozofska fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (634 kB)

1. TXT document (49 kB)

The influence of chemical composition and heat treatment on the mechanical properties and workabi...

Contibutors: Šalej Lah, Alenka (author) / Medved, Jože (author) / Fajfar, Peter (author) / Paulin, Irena (author) / Volšak, Darja (author) / Vončina, Maja (author)

1. PDF document (4673 kB)

Numbering: 2021, volume 55, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (1 kB)

Influence of heat treatment on the high-temperature oxidation behaviour of chromium-molybdenum-va...

Contibutors: Balaško, Tilen (author) / Vončina, Maja (author) / Burja, Jaka (author) / Medved, Jože (author)

1. PDF document (5347 kB)

Numbering: 2022, volume 56, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (1 kB)

Toplotna obdelava maraging jekla, navarjenega s postopkom oblikovnega obločnega navarjanja z žico

Contibutors: Lindič, Maja (author) / Podlipec, Boštjan (author) / Bušić, Matija (author) / Klobčar, Damjan (author)

Source: Ventil (Ljubljana)

Numbering: 2018, volume 24, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (514 kB)

1. TXT document (25 kB)

Corrosion behaviour of annealed 42CrMo4 steel

Contibutors: Liverić, Lovro (author) / Iljkić, Dario (author) / Jurković, Zoran (author) / Čatipović, Nikša (author) / Nuckowski, Paweł (author) / Bialas, Oktawian (author)

1. PDF document (2222 kB)

Numbering: 2023, volume 57, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (30 kB)

Influence of the thermal condition of steel on the transformation temperatures of two chromium ho...

Contibutors: Balaško, Tilen (author) / Medved, Jože (author)

1. PDF document (1333 kB)

Numbering: 2023, volume 57, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (38 kB)

Microstructure evolution and phase transformations in microalloyed Armox 500T steel during a dila...

Contibutors: Youssef, Mervat (author) / El-Shenawy, Eman (author) / Khair-Eldeen, Wael (author) / Adachi, Tadaharu (author) / Nofal, Adel (author) / Hassan, Mohsen A. (author)

1. PDF document (6266 kB)

Numbering: 2023, volume 57, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (27 kB)

Effect of steel’s thermal condition on the transformation temperatures of two hot-work tool steel...

Contibutors: Balaško, Tilen (author) / Burja, Jaka (author) / Medved, Jože (author)

1. PDF document (3143 kB)

Numbering: 2023, volume 57, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (45 kB)

Effect of dual-stage ageing and RRA treatment on the three-body abrasive wear of the AW7075 alloy

Contibutors: Lachowicz, Marzena M. (author) / Leśniewski, Tadeusz (author) / Lachowicz, Maciej B. (author)

Composition design of 316LN austenitic stainless steel for liquid-hydrogen storage based on high-...

Numbering: 2022, volume 68, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (21 MB)

1. TXT document (38 kB)

Contibutors: Ouyang, Xin (author) / Wang, Xuemin (author) / Hu, Xinming (author) / Xing, Mengnan (author) / Liu, Chenxi (author) / Pang, Zongxu (author)

1. PDF document (2909 kB)

Numbering: 2024, volume 58, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (28 kB)

Effect of heat treatment on metallurgical and mechanical properties of an aluminium 6061 hybrid c...

Contibutors: Pradeep, Devaenthiran (author) / Thirupathi, Rameshkumar (author)

1. PDF document (5138 kB)

Numbering: 2024, volume 58, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (26 kB)

Effect of Nb, Ta, and Ti microalloying on the secondary hardening of Mo-W tool steel

Contibutors: Burja, Jaka (author) / Nagode, Aleš (author) / Grabnar, Klemen (author) / Medved, Jože (author) / Balaško, Tilen (author)

1. PDF document (6033 kB)

Numbering: 2024, volume 58, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

Izboljšava mehanskih lastnosti

Contibutors: Kugler, Goran (author) / Mrvar, Primož (author) / Petrič, Mitja (author) / Križman, Alojz (author) / Terčelj, Milan (author)

Source: Livarski vestnik

Numbering: 2017, volume 64, issue 3

Provider: Društvo livarjev Slovenije

1. PDF document (1525 kB)

1. TXT document (34 kB)

Vpliv toplotne obdelave na razvoj lastnosti pri zlitini AISi7Mg(Cu)

Contibutors: Zovko Brodarac, Zdenka (author) / Stanić, Davor (author)

Source: Livarski vestnik

Numbering: 2018, volume 65, issue 1

Provider: Društvo livarjev Slovenije

1. PDF document (883 kB)

1. TXT document (43 kB)

Podaljšanje življenjske dobe kokil iz jekla za delo v vročem za tlačno litje s popravljalnim varj...

Contibutors: Dilger, K. (author) / Pries, H. (author) / Schuchardt, T. (author)

Source: Livarski vestnik

Numbering: 2015, volume 62, issue 1

Provider: Društvo livarjev Slovenije

1. PDF document (486 kB)

1. TXT document (47 kB)

Vpliv molibdena in cirkonija na aluminijeve livarske zlitine

Contibutors: Vončina, Maja (author) / Medved, Jože (author) / Kores, Stanislav (author) / Xie, Pan (author) / Cziegler, Andreas (author) / Schumacher, Peter (author)

Source: Livarski vestnik

Numbering: 2018, volume 65, issue 1

Provider: Društvo livarjev Slovenije

1. PDF document (1328 kB)

1. TXT document (37 kB)

Izločki v aluminijevi kvazikristalni zlitini

Contibutors: Zupanič, Franc (author) / Bončina, Tonica (author) / Gspan, Christian (author)

Source: Livarski vestnik

Numbering: 2015, volume 62, issue 4

Provider: Društvo livarjev Slovenije

1. PDF document (362 kB)

Microstructural and mechanical characterization of WAAM-fabricated inconel 625

Contibutors: Krishnasamy, Saravanakumar (author) / Sambasivam, Saravanan (author) / Vaiyampalayam Govindaraj, Balaji (author)

1. PDF document (1543 kB)

Numbering: 2025, volume 71, issue 1/2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (41 kB)

Vpliv postopkov modifikacije in toplotne obdelave na mikrostrukturo in mikrotrdoto aluminijeve zl...

Contibutors: Naglič, Iztok (author) / Zaky, Adam (author) / Kanurić, Nedžad (author) / Zupančič, Matej (author) / Markoli, Boštjan (author)

Source: Livarski vestnik

Numbering: 2025, volume 72, issue 4

Provider: Društvo livarjev Slovenije

1. PDF document (2431 kB)