dLib.si - search results

1. PDF document (5773 kB)

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (381 kB)

Materiali in tehnologije (2012, volume 46, issue 4)

Materiali in tehnologije (2012, volume 46, issue 5)

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (17 MB)

1. TXT document (409 kB)

Materiali in tehnologije (2012, volume 46, issue 2)

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (32 MB)

1. TXT document (463 kB)

Materiali in tehnologije (2012, volume 46, issue 3)

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (13 MB)

1. TXT document (348 kB)

The effects of micro and nano CaCo3 on the rheological and physico/mechanical behavior of an SBS/...

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (19 MB)

1. TXT document (464 kB)

Contibutors: Sadeghi, Mohsen (author) / Esfandiari, Amirhossein (author)

Calculation of accelerated stationary creep rate activation energy for a steel microstructure wit...

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (785 kB)

1. TXT document (35 kB)

Contibutors: Žužek, Borut (author) / Vodopivec, Franc (author) / Podgornik, Bojan (author) / Jenko, Monika (author) / Godec, Matjaž (author)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (168 kB)

Influence of material properties on the machinability in face milling

Contibutors: Sekulić, Milenko (author) / Hadžistević, Miodrag (author) / Gostimirović, Marin (author) / Turisova, Renata (author) / Pejić, Vlastimir (author)

1. PDF document (2830 kB)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of molybdenum on the hot-tensile properties of austenitic stainless steels

Contibutors: Tehovnik, Franc (author) / Steiner Petrovič, Darja (author) / Vode, Franci (author) / Burja, Jaka (author)

1. PDF document (2124 kB)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Relationship between the calculated oxygen activity and the sulfur partition ratio for CaO-Al2O3-...

Contibutors: Slović, Zoran (author) / Raić, Karlo (author) / Nedeljković, Ljubomir (author) / Volkov Husović, Tatjana (author)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (99 kB)

Development of a 3D printer for thermoplastic modelling

Contibutors: Valentan, Bogdan (author) / Pogačar, Dušan (author) / Brajlih, Tomaž (author) / Zupančič Hartner, Tjaša (author) / Pilipović, Ana (author) / Drstvenšek, Igor (author)

1. PDF document (1404 kB)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Evaluation of steel desulphurization in the ladle during the utilization of briquetting fluxing a...

Contibutors: Socha, Ladislav (author) / Bažan, Jiří (author) / Gryc, Karel (author) / Morávka, Jan (author) / Pivko, Michal (author) / Styrnal, Petr (author) / Pilka, Václav (author) / Piegza, Zbygněv (author) / Michalek, Karel (author) / Tkadlečková, Markéta (author)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (603 kB)

Temperature behaviour of the boride layer of a low-carbon microalloyed steel

Contibutors: Ucar, Nazim (author) / Aytar, Omer Baris (author) / Calik, Adnan (author)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (611 kB)

Thermodynamic characterization of an AlCu5.5BiSn alloy with various neodymium additions

Contibutors: Volšak, Darja (author) / Vončina, Maja (author) / Mrvar, Primož (author) / Medved, Jože (author)

1. PDF document (1123 kB)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Type of submerged entry nozzle vs. concentration profiles in the intermixed zone of round blooms ...

Contibutors: Michalek, Karel (author) / Gryc, Karel (author) / Tkadlečková, Markéta (author) / Morávka, Jan (author) / Huczala, Tomáš (author) / Bocek, David (author) / Horáková, Dana (author)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (559 kB)

Influence of the cooling rate on the microstructure development of the EN AW-AlMg4.5Mn0.7 alloy

Contibutors: Dolić, Natalija (author) / Medved, Jože (author) / Mrvar, Primož (author) / Unkić, Faruk (author)

1. PDF document (3494 kB)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (38 kB)

Reactive-sintering production of intermetallics

Contibutors: Novák, Pavel (author) / Marek, Ivo (author) / Mejzlíková, Lucie (author) / Michalcová, Alena (author) / Vojtěch, Dalibor (author)

1. PDF document (1325 kB)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Determining the hot-deformation characteristics of A 1235 aluminum alloy using a processing map

Contibutors: Yan, Wenduan (author) / Fu, Gaosheng (author)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (681 kB)

Surface modification of nanosilica fillers for the preparation of silica/epoxy nanocomposites

Contibutors: Kocijan, Aleksandra (author) / Conradi, Marjetka (author) / Zorko, Milena (author)

Aluminium-matrix nanocomposites: swarm-intelligence optimization of the microstructure and mechan...

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (790 kB)

1. TXT document (12 kB)

Contibutors: Shabani, Mohsen Ostad (author) / Mazahéri, Aly (author)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (716 kB)

The effect of shaping and firing technology on the properties of ceramic tiles based on two diffe...

Contibutors: Sokolář, Radomír (author)

1. PDF document (1111 kB)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (25 kB)

Investigation of the effect of temper condition on the friction-stir weldability of AA7075 Al-all...

Contibutors: Ipekoglu, Güven (author) / Kiral, Binnur Gören (author) / Erim, Seçil (author) / Çam, Gürel (author)

1. PDF document (3154 kB)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

In-vitro evaluation of the retention of different prefabricated posts luted with different cements

Contibutors: Maksimović, Miloš (author) / Špadijer Gostović, Aleksandra (author) / Todorović, Aleksandar (author) / Romčević, Nebojša (author) / Rudolf, Rebeka (author) / Todorović, Ana (author)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (523 kB)

Injection of brown-coal tar in a statistical relationship with the significant parameters of a bl...

Contibutors: Pustějovská, Pavlína (author) / Jursová, Simona (author) / Brožová, Silvie (author) / Pivko, Michal (author)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (160 kB)

Synthesis of nano-composite poly (4-4-diamino diphenyl sulfon) with various metals

Contibutors: Sharifirad, Meysam (author) / Omrani, Abdollah (author) / Rostami, Abbas Ali (author) / Koohyar, Fardad (author)

1. PDF document (1444 kB)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of delayed ettringite formation on the mechanical properties of aerated concrete

Contibutors: Lubej, Samo (author) / Ivanič, Andrej (author) / Rudolf, Rebeka (author) / Anžel, Ivan (author)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (428 kB)

Dependence of the fracture mode on the welding variables in the resistance spot welding of ferrit...

Contibutors: Pouranvari, Majid (author) / Ranjbarnoodeh, Eslam (author)

Nucleation and growth of Msub{23}Csub6 particles in high-chromium creep-resistant steel

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (804 kB)

1. TXT document (32 kB)

Contibutors: Vodopivec, Franc (author) / Skobir Balantič, Danijela Anica (author) / Jenko, Monika (author) / Žužek, Borut (author) / Godec, Matjaž (author)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (319 kB)

Simulation of latent-heat thermal storage integrated with room structures

Contibutors: Charvat, Pavel (author) / Mauder, Tomas (author) / Ostry, Milan (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (466 kB)

Structure and properties of AlMgSi alloys after ECAP and POST-ECAP ageing

Contibutors: Fujda, Martin (author) / Matvija, Miloš (author) / Kvačkaj, Tibor (author) / Milkovič, Ondrej (author) / Zubko, Pavol (author) / Nagyová, Katarína (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (259 kB)

Identification of the material parameters of a unidirectional fiber composite using a micromodel

Contibutors: Srbová, Hana (author) / Kroupa, Tomáš (author) / Zemčík, Robert (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (193 kB)

Stabilization of rutile TiO sub 2 nanoparticles with GLYMO in polyacrylic clear coating

Contibutors: Godnjavec, Jerneja (author) / Znoj, Bogdan (author) / Vince, Jelica (author) / Steinbücher, Miha (author) / Žnidaršič, Andrej (author) / Venturini, Peter (author)

Numbering: 2012, volume 46, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (993 kB)

Plasma-enhanced chemical vapour deposition of octafluorocyclobutane onto carbonyl iron particles

Contibutors: Sedlacik, Michal (author) / Pavlinek, Vladimir (author) / Lehocký, Marián (author) / Junkar, Ita (author) / Vesel, Alenka (author)

Numbering: 2012, volume 46, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (296 kB)

Experimental and theoretical investigation of drying technology and heat transfer on the contact ...

Contibutors: Prvulović, Slavica (author) / Tolmać, Dragiša (author) / Lambić, Miroslav (author) / Dimitrijević, Dragana (author) / Tolmač, Jasna (author)

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (189 kB)

Influence of transient response of platinum electrode on neural signals during stimulation of iso...

Contibutors: Pečlin, Polona (author) / Vode, Franci (author) / Mehle, Andraž (author) / Grešovnik, Igor (author) / Rozman, Janez (author)

Optical emission characterization of extremely reactive oxygen plasma during treatment of graphit...

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (180 kB)

1. TXT document (37 kB)

Contibutors: Kregar, Zlatko (author) / Bišćan, Marijan (author) / Milošević, Slobodan (author) / Eleršič, Kristina (author) / Zaplotnik, Rok (author) / Primc, Gregor (author) / Cvelbar, Uroš (author)

Numbering: 2012, volume 46, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (314 kB)

Evolution of the number and size of the inclusions during steel treatment in a ladle furnace and ...

Contibutors: Adolf, Zdeněk (author) / Jurča, Jakub (author)

Effect of the antimony thin-film deposition sequence on copper-silicon interdiffusion

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (361 kB)

1. TXT document (12 kB)

Contibutors: Nasser, Menni (author) / Mokhtar, Boudissa (author) / Mahfoud, Benkerri (author) / Mounir, Reffas (author) / Fouzia, Zekkar (author) / Chaouki, Benazzouz (author)

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (255 kB)

Etching rates of different polymers in oxygen plasma

Contibutors: Vesel, Alenka (author) / Semenič, Tomaž (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (137 kB)

Influence of segregations on the fracture toughness Ksub{Ic} of high-strength spring steel

Contibutors: Senčič, Bojan (author) / Leskovšek, Vojteh (author)

Microstructural and physical-mechanical analyses of the performance of nanostructured and other c...

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (771 kB)

1. TXT document (29 kB)

Contibutors: Borsoi, Giovanni (author) / Tavares, Martha (author) / Veiga, Maria do Rosário (author) / Silva, António Santos (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (262 kB)

Influence of the water temperature on the cooling intensity of mist nozzles in continuous casting

Contibutors: Raudensky, Miroslav (author) / Hnizdil, Milan (author) / Hwang, Jong Yeon (author) / Lee, Sang Hyeon (author) / Kim, Seong Yeon (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (608 kB)

Effect of fly-ash amount and cement type on the corrosion performance of the steel embedded in co...

Contibutors: Boga, Ahmet Raif (author) / Topçu, Ilker Bekir (author) / Öztürk, Murat (author)

The plasma polymerisation process for the deposition of amino-containing film on the poly(ethylen...

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (386 kB)

1. TXT document (29 kB)

Contibutors: Peršin, Zdenka (author) / Jesih, Adolf (author) / Stana-Kleinschek, Karin (author)

Numbering: 2012, volume 46, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (77 kB)

The influence of tool wear on the chip-forming mechanism and tool vibrations

Contibutors: Antić, Aco (author) / Petrović, Petar B. (author) / Zeljković, Milan (author) / Kosec, Borut (author) / Hodolič, Janko (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (660 kB)

Synthesis of micro-composite beads with magnetic nano-particles embedded in porous CaCOsub3 matrix

Contibutors: Vesel, Alenka (author) / Košak, Aljoša (author) / Haložan, David (author) / Eleršič, Kristina (author)

Numbering: 2012, volume 46, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (431 kB)

Effect of a foaming agent and its morphology on the foaming behaviour, cell-size distribution and...

Contibutors: Kevorkijan, Varužan (author) / Škapin, Srečo D. (author) / Paulin, Irena (author) / Kovačec, Uroš (author) / Jenko, Monika (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (335 kB)

Friction-stir welding of aluminium alloy 5083

Contibutors: Klobčar, Damjan (author) / Kosec, Ladislav (author) / Pietras, Adam (author) / Smolej, Anton (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (321 kB)

Mechanical and tribological characteristics of stir-cast Al-Si10Mg and self-lubricating Al-Si10Mg...

Contibutors: Vinoth, Kannappan Somasundara (author) / Subramanian, Ramanathan (author) / Dharmalingam, Somasundaram (author) / Anandavel, Balu (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (400 kB)

Aspects of titanium-implant surface modification at the micro and nano levels

Contibutors: Milinković, Iva (author) / Rudolf, Rebeka (author) / Raić, Karlo (author) / Aleksić, Zoran (author) / Lazić, Vojkan (author) / Todorović, Aleksandar (author) / Stamenković, Dragoslav (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (626 kB)

Prediction of the thermodynamic properties for liquid Al-Mg-Zn alloys

Contibutors: Živković, Dragana (author) / Du, Yong (author) / Balanović, Ljubiša (author) / Manasijević, Dragan (author) / Minić, Duško (author) / Talijan, Nadežda (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (409 kB)

Heparin adsorption onto model poly(ethylene terephtalate) (PET) surfaces monitored by QCM-D

Contibutors: Doliška, Aleš (author) / Strnad, Simona (author) / Stana-Kleinschek, Karin (author)

Numbering: 2012, volume 46, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (418 kB)

Challenges in the computer modeling of phase change materials

Contibutors: Klimes, Lubomir (author) / Charvat, Pavel (author) / Ostry, Milan (author)

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (199 kB)

Numerical and experimental investigation of the temperature field of a solidifying massive ductil...

Contibutors: Kavička, František (author) / Stransky, Karel (author) / Dobrovská, Jana (author) / Sekanina, Buhumil (author) / Štětina, Josef (author) / Gontarev, Vasilij (author)

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (292 kB)

Physical regularities in the cracking of nanocoatings and a method for an automated determination...

Contibutors: Maruščak, P. O. (author) / Gliha, Vladimir (author) / Konovalenko, Igor (author) / Vuherer, Tomaž (author) / Panin, Sergey (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (262 kB)

Investigation on the aging behaviour of the functionally gradient material consisting of boron ca...

Contibutors: Sarikan, Bertan (author) / Balci, Erhan (author) / Űbeyli, Mustafa (author) / Camuşcu, Necip (author)

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (723 kB)

Application of a Taguchi-based neural network for forecasting and optimization of the surface rou...

Contibutors: Kazancoglu, Yugut (author) / Esme, Ugur (author) / Kulekci, Mustafa Kemal (author) / Kahraman, Funda (author) / Samur, Ramazan (author) / Akkurt, Adnan (author) / Ipekci, Melih Turan (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (273 kB)

UV polymerization of poly (N-isopropylacrylamide) hydrogel

Contibutors: Kurečič, Manja (author) / Sfiligoj-Smole, Majda (author) / Stana-Kleinschek, Karin (author)

Numbering: 2012, volume 46, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (600 kB)

Structural, thermal and magnetic properties of barium-ferrite powders substituted with Mn, Cu or ...

Contibutors: Gurbuz, Aylin (author) / Onar, Nurhan (author) / Ozdemir, Ismail (author) / Karaoglanli, Abdullah Cahit (author) / Celik, Erdal (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (562 kB)

Computer simulation of fatigue, creep and thermal-fatigue cracks propagation in gas-turbine blades

Contibutors: Semenov, Artem (author) / Semenov, Sergey (author) / Nazarenko, Anatoly (author) / Getsov, Leonid (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (397 kB)

Simulation of the self-healing of dolomitic lime mortar

Contibutors: Lubelli, Barbara (author) / Nijland, Timo G. (author) / Hees, Rob P. J. van (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (550 kB)

Microstructure development of the Ni-GDC anode material for IT-SOFC

Contibutors: Zupan, Klementina (author) / Marinšek, Marjan (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (472 kB)

Small-angle X-ray scattering spectra of iron-based magnetic fluids

Contibutors: Rugmai, Supagorn (author) / Sirisathitkul, Chitnarong (author) / Chokprasombat, Komkrich (author) / Rangsanga, Prawet (author) / Harding, Phimphaka (author) / Sirkhirin, Toemsak (author) / Jantaratana, Pongsakorn (author)

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (421 kB)

The impact of die angle on tool loading in the process of cold extruding steel

Contibutors: Randjelović, Saša (author) / Manić, Miodrag (author) / Trajanović, Miroslav (author) / Milutinović, Mladomir (author) / Movrin, Dejan (author)

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (720 kB)

Lime-metakaolin hydration products: a microscopy analysis

Contibutors: Gameiro, André Leal (author) / Santos-Silva, Antonio (author) / Veiga, Maria do Rosário (author) / Velosa, Ana Luísa (author)

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (301 kB)

Characterization of defects in PVD TiAlN hard coatings

Contibutors: Gselman, Peter (author) / Bončina, Tonica (author) / Zupanič, Franc (author) / Panjan, Peter (author) / Kek-Merl, Darja (author) / Čekada, Miha (author)

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (717 kB)

Digital imaging analysis of microstructures as a tool to identify local plastic deformation

Contibutors: Suban, Marjan (author) / Cvelbar, Robert (author) / Bundara, Borut (author)

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (593 kB)

An RE/RM approach to the design and manufacture of removable partial dentures with a biocompatibi...

Contibutors: Puškar, Tatjana M. (author) / Jevremović, Danimir P. (author) / Budak, Igor (author) / Vukelić, Djordje (author) / Kojić, Vesna (author) / Eggbeer, Dominic (author) / Williams, Robert J. (author)

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (698 kB)

Final-structure prediction of continuously cast billets

Contibutors: Mauder, Tomáš (author) / Štětina, Josef (author) / Klimeš, Lubomír (author) / Kavička, František (author)

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (624 kB)

Microstructure of metal-matrix composites reinforced by ceramic microballoons

Contibutors: Orbulov, Imre Norbert (author) / Májlinger, Kornél (author)

Heterogeneous surface recombination of neutral nitrogen atoms

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (581 kB)

1. TXT document (33 kB)

Contibutors: Vesel, Alenka (author)

Numbering: 2012, volume 46, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (67 kB)

Effect of sintering parameters on the density, microstructure and mechanical properties of the ni...

Contibutors: Butković, Samir (author) / Oruč, Mirsada (author) / Šarić, Emir (author) / Mehmedović, Muhamed (author)

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (216 kB)

Simulations of the shrinkage porosity of Al-Si-Cu automotive components

Contibutors: Lavtar, Lejla (author) / Petrič, Mitja (author) / Medved, Jože (author) / Taljat, Boštjan (author) / Mrvar, Primož (author)

Batch-filling scheduling and particle swarms

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (528 kB)

1. TXT document (11 kB)

Contibutors: Kovačič, Miha (author) / Šarler, Božidar (author)

Minimization of the surface roughness and form error on the milling of free-form surfaces using a...

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (178 kB)

1. TXT document (40 kB)

Contibutors: Kurt, Mustafa (author) / Hartomacioglu, Selim (author) / Mutlu, Bilçen (author) / Köklü, Ugur (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (970 kB)

Development of a model for the internet portal "strength of materials"

Contibutors: Globa, Larisa (author) / Novogrudska, Rina (author) / Mamuzić, Ilija (author)

Magnesium alloys for hydrogen storage

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (415 kB)

1. TXT document (13 kB)

Contibutors: Vojtěch, Dalibor (author) / Knotek, Vítězslav (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (268 kB)

Setting a numerical simulation of filling and solidification of heavy steel ingots based on real ...

Contibutors: Tkadlečková, Markéta (author) / Machovcak, Pavel (author) / Gryc, Karel (author) / Klus, Petr (author) / Michalek, Karel (author) / Socha, Ladislav (author) / Kovac, Marek (author)

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (347 kB)

Numerical study of heat-transfer enhancement of homogeneous water-Au nanofluid under natural conv...

Contibutors: Ternik, Primož (author) / Rudolf, Rebeka (author) / Žunič, Zoran (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (310 kB)

A study of the high-temperature interaction between synthetic slags and steel

Contibutors: Gryc, Karel (author) / Stransky, Karel (author) / Michalek, Karel (author) / Winkler, Zdeněk (author) / Morávka, Jan (author) / Tkadlečková, Markéta (author) / Socha, Ladislav (author) / Bažan, Jiří (author) / Dobrovská, Jana (author) / Zlá, Simona (author)

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (493 kB)

Wear-resistant intermetallic arc spray coatings

Contibutors: Altuncu, Ekrem (author) / Iriç, Sedat (author) / Ustel, Fatih (author)

Dusty plasma deposition of nanocomposite thin films

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (317 kB)

1. TXT document (11 kB)

Contibutors: Drenik, Aleksander (author) / Clengereaux, Richard (author)

Numbering: 2012, volume 46, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (611 kB)

Laboratory assessment of micro-encapsulated phase-change materials

Contibutors: Ostrý, Milan (author) / Přikryl, Radek (author) / Charvát, Pavel (author) / Mlčoch, Tomáš (author) / Bakajová, Barbora (author)

Application of powder metallurgy in the processing of aluminium scraps with high-iron contents

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (139 kB)

1. TXT document (15 kB)

Contibutors: Vojtěch, Dalibor (author) / Průša, Filip (author)

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (480 kB)

Thermal stability of Al-Mn-Be melt-spun ribbons

Contibutors: Lojen, Gorazd (author) / Bončina, Tonica (author) / Zupanič, Franc (author)

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (779 kB)

Content of Cr and Cr (VI) in a welding fume by different Cr content in an experimental coating of...

Contibutors: Begić, Razija (author) / Jenko, Monika (author) / Godec, Matjaž (author) / Donik, Črtomir (author)

Influence of the process parameters and the mechanical properties of aluminum alloys on the burr ...

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (191 kB)

1. TXT document (11 kB)

Contibutors: Köglü, Ugur (author)

Shape-memory polymers filled with SiO2 nanoparticles

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (186 kB)

1. TXT document (25 kB)

Contibutors: Bocsan, Iulia Andreea (author) / Conradi, Marjetka (author) / Zorko, Milena (author) / Jerman, Ivan (author) / Hancu, Liana (author) / Borzan, Marian (author) / Fabre, Maarten (author) / Ivens, J. (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (551 kB)

Use of a two-dimensional pseudo-homogeneous model for the study of temperature and conversion pro...

Contibutors: Marghsi, Mohamed (author) / Benachour, Djafer (author)

Outgassing of hydrogen from a stainless steel vacuum chamber

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (163 kB)

1. TXT document (32 kB)

Contibutors: Avdiaj, Sefer (author) / Erjavec, Bojan (author)

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (181 kB)

Upogibna trdnost korundne keramike

Contibutors: Ambrožič, Milan (author) / Gorjan, Lovro (author)

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (239 kB)

Optimization of multi-process parameters according to the surface quality criteria in the end mil...

Contibutors: Durmuş, Hülya (author)

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (498 kB)

Method for dynamic control of neutral atom density in a plasma chamber

Contibutors: Primc, Gregor (author)

Numbering: 2012, volume 46, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (415 kB)

Theoretical and experimental estimation of the working life of machine parts hard faced with aust...

Contibutors: Lazić, Vukić (author) / Sedmak, Aleksander (author) / Milosavljević, Dragan (author) / Nikolić, Ilija (author) / Aleksandrović, Srbislav (author) / Nikolić, Ružica (author) / Mutavdžić, Milan (author)

Study of the microstructure and oxidation behavior of YSZ and YSZ/Al2O3 TBCs with HVOF bond coatings

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (539 kB)

1. TXT document (33 kB)

Contibutors: Karaoglanh, Abdullah Cahit (author) / Erdogan, Garip (author) / Kahraman, Yaşar (author) / Türk, Ahmet (author) / Üstel, Fatih (author) / Özdemir, Ismail (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (313 kB)

Optimization of the mechanical properties of the superalloy Nimonic 80A

Contibutors: Sunulahpašić, Raza (author) / Oruč, Mirsada (author) / Hadžalić, Mustafa (author) / Rimac, Milenko (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (186 kB)

Microstructure and mechanical properties of carbon/carbon-silicon carbide composites prepared by ...

Contibutors: Krnel, Kristoffer (author) / Stadler, Zmago (author) / Kosmač, Tomaž (author)

Effect of tempering on the room-temperature mechanical properties of X20CrMoV121 and P91 steels

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (240 kB)

1. TXT document (15 kB)

Contibutors: Kafexhiu, Fevzi (author) / Vodopivec, Franc (author) / Vojvodič-Tuma, Jelena (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (436 kB)

The performance of various artificial neurons interconnections in the modelling and experimental ...

Contibutors: Shabani, Mohsen Ostad (author) / Mazahéri, Aly (author)

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (613 kB)

Thermodynamic analysis of the formation of non-metallic inclusions during the production of C45 s...

Contibutors: Krajnc, Luka (author) / Klančnik, Grega (author) / Mrvar, Primož (author) / Medved, Jože (author)

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (800 kB)