Digitalna knjižnica Slovenije

Načrtovanje in optimiranje avtomatiziranih regalnih skladiščnih sistemov

Numbering: 2007, volume 53, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (887 kB)

1. TXT document (46 kB)

Contibutors: Lerher, Tone (author) / Potrč, Iztok (author)

Application of a Taguchi-based neural network for forecasting and optimization of the surface rou...

Numbering: 2006, volume 52, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (561 kB)

1. TXT document (95 kB)

Contibutors: Kazancoglu, Yugut (author) / Esme, Ugur (author) / Kulekci, Mustafa Kemal (author) / Kahraman, Funda (author) / Samur, Ramazan (author) / Akkurt, Adnan (author) / Ipekci, Melih Turan (author)

Optimiranje oblike konstrukcij: tristranični projektni element

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (273 kB)

1. TXT document (24 kB)

Contibutors: Kegl, Marko (author)

Numbering: 2002, volume 48, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (315 kB)

Design and analysis of low power master slave flip-flops

Contibutors: Khan, Imran Ahmed (author) / Beg, Mirza Tariq (author)

Source: Informacije MIDEM

Numbering: 2013, volume 43, issue 1

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1027 kB)

1. TXT document (32 kB)

Design of an anti-aliasing active filter for a hydroacoustic receiving station using discrete non...

Contibutors: Bugrov, Vladimir (author) / Makarova, Iuliia (author)

Source: Elektrotehniški vestnik

Numbering: 2018, volume 85, issue 3

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (274 kB)

1. TXT document (23 kB)

Optimization of grooved micromixer for microengineering technologies

Contibutors: Sabotin, Izidor (author) / Tristo, Gianluca (author) / Bissacco, Giuliano (author) / Valentinčič, Joško (author)

Source: Informacije MIDEM

Numbering: 2013, volume 43, issue 1

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1491 kB)

1. TXT document (45 kB)

Design of operational transconductance amplifier with temperature compensation

Contibutors: Berčan, Damjan (author) / Sešek, Aleksander (author) / Trontelj, Janez (author)

Source: Informacije MIDEM

Numbering: 2017, volume 47, issue 3

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (2852 kB)

1. TXT document (17 kB)

Design optimization for symmetrical gravity retaining walls

Contibutors: Sadoglu, Erol (author)

Source: Acta geotechnica Slovenica

Numbering: 2014, volume 11, issue 2

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. PDF document (170 kB)

Optimization for sustainable manufacturing based on axiomatic design principles

Contibutors: Lee, G. B. (author) / Badrul, O. (author)

Source: Advances in production engineering and management

Numbering: 2014, volume 9, issue 1

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (663 kB)

Optimization of multi-process parameters according to the surface quality criteria in the end mil...

Contibutors: Durmuş, Hülya (author)

Optimization of the process parameters for surface roughness and tool life in face milling using ...

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (498 kB)

1. TXT document (26 kB)

Contibutors: Sarikaya, Murat (author) / Dilipak, Hakan (author) / Gezgin, Akin (author)

Numbering: 2015, volume 49, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (902 kB)

Hibridna izdelava s postopkom ciljnega nalaganja taljenega polimera in frezanja

Contibutors: Grguraš, Damir (author) / Kramar, Davorin (author) / Homar, David (author) / Kopač, Janez (author)

Source: Ventil (Ljubljana)

Numbering: 2016, volume 22, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (434 kB)

1. TXT document (26 kB)

Hibridna izdelava s postopkom ciljnega nalaganja taljenega polimera in frezanja

Contibutors: Grguraš, Damir (author) / Kramar, Davorin (author) / Homar, David (author) / Kopač, Janez (author)

Source: Ventil (Ljubljana)

Numbering: 2016, volume 22, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (431 kB)

1. TXT document (30 kB)

Analog circuit topology representation for automated synthesis and optimization

Contibutors: Rojec, Žiga (author) / Olenšek, Jernej (author) / Fajfar, Iztok (author)

Source: Informacije MIDEM

Numbering: 2018, volume 48, issue 1

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1333 kB)

Optimization of UPLC method for simultaneous determination of rosuvastatin and rosuvastatin degra...

Contibutors: Zakrajšek, Jure (author) / Bevc, Katarina (author) / Bohanec, Simona (author) / Urleb, Uroš (author)

Numbering: 2017, volume 64, issue 4

Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)

1. PDF document (554 kB)

The optimization of a race car intake system

Contibutors: Lešnik, Luka (author) / Mlakar, Nejc (author) / Biluš, Ignacijo (author) / Kegl, Breda (author)

Source: JET on-line
Journal of energy technology

Numbering: 2017, volume 10, iss. 3

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. PDF document (3666 kB)

1. TXT document (22 kB)

Nova metodologija načrtovanja poti z minimalizacijo razlik med višinskimi kotami nivelete in terena

Contibutors: Tunalioglu, Nursu (author) / Soycan, Metin (author)

Source: Geodetski vestnik

Numbering: 2014, volume 58, issue 1

Provider: Zveza geodetov Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (4201 kB)

1. TXT document (34 kB)

Proposed design of local 2D geodetic network for the construction of the tunnel part of the Belgr...

Contibutors: Savanović, Marija (author) / Savanović, Rajko (author) / Ninkov, Toša (author) / Sabados, Igor (author)

Source: Geodetski vestnik

Numbering: 2015, volume 59, issue 3

Provider: Zveza geodetov Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (531 kB)

1. TXT document (34 kB)

Optimizacija načrtovanja vodooskrbnih sistemov z uporabo genetskih algoritmov

Contibutors: Simpson, Angus R. (author)

Source: Acta hydrotechnica

Numbering: 2000, volume 18, issue 29

Provider: Univerza v Ljubljani, Fakulteta za gradbeništvo in geodezijo
(Obvezni izvod spletne publikacije)

1. PDF document (126 kB)

1. TXT document (30 kB)

Večkriterijski pristop pri konstruiranju polimernih zobnikov

Contibutors: Tavčar, Jože (author) / Černe, Borut (author) / Duhovnik, Jože (author) / Zorko, Damijan (author)

Source: Ventil (Ljubljana)

Numbering: 2021, volume 27, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1191 kB)

1. TXT document (54 kB)

Načrtovanje težnostnega podpornega zidu na podlagi verjetnosti porušitve

Contibutors: Jelušič, Primož (author) / Varga, Rok (author) / Žlender, Bojan (author)

Source: Gradbeni vestnik

Numbering: 2021, letn. 70

Provider: Zveza društev gradbenih inženirjev in tehnikov Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (3336 kB)

1. TXT document (42 kB)

Design of 3D printed below-knee prosthetic

Contibutors: Ozmen, Ozbil (author) / Surmen, Hasan Kemal (author)

1. PDF document (3606 kB)

Numbering: 2024, volume 70, issue 11/12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (61 kB)

Parametric optimization of the output shaft of a portal axle using finite element analysis

Contibutors: Ooi, Jong Boon (author) / Wang, Xin (author) / Lim, Ying Pio (author) / Tan, ChingSeong (author) / Ho, Jee-Hou (author) / Wong, Kok-Cheong (author)

1. PDF document (1568 kB)

Numbering: 2013, volume 59, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (24 kB)

Reliability-based design optimization of pump penetration shell accounting for material and geome...

Contibutors: Velayudhan, Gautham (author) / Venugopal, Prabhu Raja (author) / Gnanasigamony Thankareathenam, Ebron Shaji (author) / Selvakumar, Mohanraj (author) / Pudukarai Ramaswamy, Thyla (author)

1. PDF document (2020 kB)

Numbering: 2021, volume 67, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Investigation on the modeling and dynamic characteristics of a novel water hydraulic proportional...

Contibutors: Han, Mingxing (author) / Liu, Yinshui (author) / Liao, Yitao (author) / Wang, Shucai (author)

1. PDF document (4265 kB)

Numbering: 2021, volume 67, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Active structural derivator in the design crystallization phase of L7e vehicle structures

Contibutors: Jedrzejczyk, Roman Pawel (author) / Alb, Michael Sigmar (author)

1. PDF document (4999 kB)

Numbering: 2019, volume 65, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (88 kB)

Mechanical design optimization for multi-finger haptic devices applied to virtual grasping manipu...

Contibutors: López, Javier (author) / Brenosa, Jose (author) / Galiana, Ignacio (author) / Ferre, Manuel (author) / Giménez, Antonio (author) / Barrio, Jorge (author)

1. PDF document (3273 kB)

Numbering: 2012, volume 58, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (48 kB)

Sensitivity-based multidisciplinary optimal design of a hydrostatic rotary table with particle sw...

Contibutors: Cheng, Qiang (author) / Zhan, Chengpeng (author) / Liu, Zhifeng (author) / Zhao, Yongsheng (author) / Gu, Peihua (author)

1. PDF document (2677 kB)

Numbering: 2015, volume 61, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (61 kB)

Integrative CAE-driven design process in the embodiment design phase of L7e vehicle structures

Contibutors: Jedrzejczyk, Roman Pawel (author) / Alb, Michael Sigmar (author) / Jost, Thomas (author)

1. PDF document (4173 kB)

Numbering: 2018, volume 64, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (59 kB)

Numerical simulation-based effect characterization and design optimization of a micro cross-flow ...

Contibutors: Woldemariam, Endashaw T. (author) / Lemu, Hirpa G. (author)

1. PDF document (2726 kB)

Numbering: 2019, volume 65, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (42 kB)

The validation of numerical methodology for oven design optimization using numerical simulations ...

Contibutors: Kokolj, Uroš (author) / Škerget, Leopold (author) / Ravnik, Jure (author)

1. PDF document (2082 kB)

Numbering: 2017, volume 63, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

Structural analysis and size optimization of a fine-blanking press frame based on sensitivity ana...

Contibutors: Zhao, Xinhao (author) / Liu, Yanxiong (author) / Hua, Lin (author) / Mao, Huajie (author)

1. PDF document (2392 kB)

Numbering: 2020, volume 66, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Optimization of the flow path efficiency in a vacuum cleaner fan

Contibutors: Son, In-Hyuk (author) / Noh, Yoojeong (author) / Choi, Eun-Ho (author) / Choi, Ju Yong (author) / Ji, Young Jin (author) / Lim, Kyungnae (author)

Numbering: 2018, volume 64, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. 16013595 (2252 kB)

Design and optimization of PSD housing using a MIGA-NLPQL hybrid strategy based on a surrogate model

Contibutors: Li, Feng (author) / Qin, Yumo (author) / Pang, Zhao (author) / Tian, Lei (author) / Zeng, Xiaohua (author)

1. PDF document (3670 kB)

Numbering: 2014, volume 60, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Quality by design based optimization of a high performance liquid chromatography method for assay...

Contibutors: Zakrajšek, Jure (author) / Stojić, Vladimir (author) / Bohanec, Simona (author) / Urleb, Uroš (author)

Optimization and validation of a sensitive method for HPLC-PDA simultaneous determination of tora...

Numbering: 2015, volume 62, issue 1

Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)

1. PDF document (365 kB)

1. TXT document (36 kB)

Contibutors: Subramanian, Venkatesan (author) / Nagappan, Kannappan (author) / Mannemala, Sai Sandeep (author)

Process-parameter optimization of WEDM with Inconel 825 alloy using GRA

Numbering: 2015, volume 62, issue 3

Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)

1. PDF document (262 kB)

1. TXT document (31 kB)

Contibutors: Subburaj, Arulselvan (author) / Ravindran, Durairaj (author) / Decruz, Arul Marcel Moshi Antony Joseph (author) / Dharmaraj, Vignesh Kumar (author)

1. PDF document (4090 kB)

Numbering: 2021, volume 55, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (1 kB)

Modified design structure of a metamaterial microstrip patch array antenna for RF energy optimiza...

Contibutors: Jackson, Beulah (author) / Saravanakumar, R (author) / Balachander, Bhuvaneswari (author) / Haldorai, Anandakumar (author) / Varalakshmi, S. (author) / Anselin, Luc (author)

1. PDF document (4023 kB)

Numbering: 2022, volume 56, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (1 kB)

Design optimization average-based algorithm

Contibutors: Barradas Cardoso, Joao (author) / Barreiros, Artur (author)

Empirical study on the optimization strategy of subject metro design based on virtual reality

Numbering: 2020, volume 44, issue 1

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (502 kB)

1. TXT document (51 kB)

Contibutors: Wu, Zhendong (author)

1. PDF document (1055 kB)

Numbering: 2018, volume 42, issue 3

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. TXT document (31 kB)

Research on the simulation design of humanistic landscape optimization in urban residential area ...

Contibutors: Wu, Wei (author) / Wang, Boxun (author) / Yang, Shuai (author)

Computer-aided architectural design optimization based on BIM technology

Numbering: 2019, volume 43, issue 3

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (315 kB)

1. TXT document (26 kB)

Contibutors: Fan, Haiyan (author)

1. PDF document (1044 kB)

Numbering: 2022, volume 46, issue 3

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

Experimental design and response surface modelling for optimization of vat dye from water by nano...

Contibutors: Arabi, Simin (author) / Sohrabi, Mohammad Reza (author)

An experimental design approach to optimization of the liquid chromatographic separation conditio...

Numbering: 2013, volume 60, issue 4

Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)

1. PDF document (262 kB)

1. TXT document (30 kB)

Contibutors: Çubuk Demiralay, Ebru (author)

Limit state design using exact sensitivity analysis and shape optimization

Numbering: 2012, volume 59, issue 2

Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)

1. PDF document (173 kB)

1. TXT document (29 kB)

Contibutors: Kristanič, Niko (author) / Korelc, Jože (mentor)

Provider: Univerza v Ljubljani, Fakulteta za gradbeništvo in geodezijo

1. PDF document (6331 kB)

1. TXT document (274 kB)

Dostop v Repozitoriju Univerze

Production of the design developed to assembly filter parts, optimization of welding and field test

Contibutors: Maden, Hakan (author) / Cetinkaya, Kerim (author)

1. PDF document (2350 kB)

Numbering: 2022, volume 68, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (51 kB)

Optimization techniques for green layout design in manufacturing industries

Contibutors: Sherfudeen, Sheik Sulaiman (author) / Athinamilagi, Muthiah (author) / Venkataramanujam, Janakiraman (author)