Number of hits: 54
Source type
journals (51)
theses and dissertations (3)
Journals - titles
Acta agriculturae Slovenica (1)
Acta chimica slovenica (1)
Advances in production engineering and management (5)
Informatica (Ljubljana) (3)
Livarski vestnik (1)
Materiali in tehnologije (22)
Mednarodno inovativno poslovanje (1)
Strojniški vestnik (17)
Journals - form
articles (51)
Language
english (54)odstrani
slovenian (7)
Date
2003 (1)
2005 (1)
2007 (2)
2008 (2)
2010 (2)
2011 (2)
2012 (4)
2013 (1)
2014 (6)
2015 (3)
2016 (2)
2017 (2)
2018 (5)
2019 (4)
2021 (6)
2022 (3)
2023 (4)
2024 (4)
Location
DOBA Fakulteta za uporabne poslovne in družbene študije Maribor (1)
Društvo livarjev Slovenije (1)
Inštitut za kovinske materiale in tehnologije (22)
Slovensko društvo Informatika (3)
Slovensko kemijsko društvo (1)
Univerza v Ljubljani, Biotehniška fakulteta (1)
Univerza v Ljubljani, Fakulteta za farmacijo (3)
Univerza v Ljubljani, Fakulteta za strojništvo (17)
Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo (5)
Content
Agriculture (2)
Business Management (3)
Chemical Engineering (11)
Chemistry (1)
Computer Science (2)
Engineering and Technology (35)
Industry, Craft, Handicraft (1)
Informatics (1)
Management (1)
Mathematics (1)
Medicine (1)
Printing Industry, Publishing, Book Trade (1)
Publisher
= Association of Mechanical Engineers and Technicians of Slovenia etc. (1)
Association of Mechanical Engineers and Technicians of Slovenia et al. (7)
Doba Epis (1)
Društvo livarjev Slovenije (1)
Fakulteta za strojništvo, Inštitut za proizvodno strojništvo (5)
G. Hudovornik (1)
Informatika (1)
Inštitut za kovinske materiale in tehnologije (22)
M. Bjelošević (2)
Slovenian Chemical Society (1)
Slovensko društvo Informatika (2)
Slovensko kemijsko društvo (1)
Založba Univerze v Ljubljani (1)
Zveza strojnih inženirjev in tehnikov Slovenije et al. (7)
Zveza strojnih inženirjev in tehnikov Slovenije etc. (10)
Rights
CC BY – Attribution (3)
CC BY-NC - Attribution, Non-Commercial (1)
In Copyright (50)
Access
Public (51)
Restricted (designated terminals) (3)
Search in (54)
Sort by:
Machining process optimization by colony based cooperative search technique
Contibutors: Župerl, Uroš (author) / Čuš, Franc (author)
Source: Strojniški vestnik
Numbering: 2008, volume 54, issue 11
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
1. PDF document (277 kB)
1. TXT document (28 kB)
Optimizacija postopka razreza materiala / Optimization of the cutting-stock process
Contibutors: Trkman, Peter (author) / Gradišar, Miro (author)
Source: Strojniški vestnik
Numbering: 2003, volume 49, issue 9
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
1. PDF document (155 kB)
1. TXT document (30 kB)
Optimization of the process parameters for dry-sliding wear of an Al 2219-SiCp composite using th...
Contibutors: Ganesh, Radhakrishnan (author) / Chandrasekaran, Kesavan (author) / Ameen, Mohammed (author) / Kumar, Raja Pavan (author)
Source: Materiali in tehnologije
Numbering: 2014, volume 48, issue 3
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1200 kB)
1. TXT document (23 kB)
Coupling functions treatment in a Bi-Level optimization process
Contibutors: Guédas, Benoît (author) / Dépincé, Philippe (author)
Source: Strojniški vestnik
Numbering: 2008, volume 54, issue 6
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
1. PDF document (319 kB)
1. TXT document (45 kB)
Optimising the effect of cutting parameters on the average surface roughness in a turning process...
Contibutors: Akkuş, Harun (author)
Source: Materiali in tehnologije
Numbering: 2018, volume 52, issue 6
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (287 kB)
1. TXT document (22 kB)
Drilling process optimization by using fuzzy-based multi-response surface methodology
Contibutors: Boyaci, A. I. (author) / Hatipoglu, T. (author) / Balci, Erhan (author)
Source: Advances in production engineering and management
Numbering: 2017, volume 12, issue 2
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (639 kB)
1. TXT document (30 kB)
Optimizacija neprekinjenega postopka sušenja v težavnostnih sušilnicah
Contibutors: Voća, Neven (author) / Krička, Tajana (author) / Janušić, Vanja (author)
Source: Strojniški vestnik
Numbering: 2007, volume 53, issue 1
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
1. PDF document (360 kB)
1. TXT document (46 kB)
Kombiniran sistem ločenega optimiranja in prilagodnega nastavljanja rezalnih parametrov med proce...
Contibutors: Župerl, Uroš (author) / Čuš, Franc (author) / Kiker, Edvard (author) / Milfelner, Matjaž (author)
Source: Strojniški vestnik
Numbering: 2005, volume 51, issue 9
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
1. PDF document (1479 kB)
1. TXT document (60 kB)
Application of a Taguchi-based neural network for forecasting and optimization of the surface rou...
Contibutors: Kazancoglu, Yugut (author) / Esme, Ugur (author) / Kulekci, Mustafa Kemal (author) / Kahraman, Funda (author) / Samur, Ramazan (author) / Akkurt, Adnan (author) / Ipekci, Melih Turan (author)
Source: Materiali in tehnologije
Numbering: 2012, volume 46, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (273 kB)
1. TXT document (24 kB)
Modelling and optimization of a laser droplet-formation process
Contibutors: Kokalj, Tadej (author) / Grabec, Igor (author) / Govekar, Edvard (author)
Source: Materiali in tehnologije
Numbering: 2013, volume 47, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (874 kB)
1. TXT document (39 kB)
Optimization of the mechanical and tribological properties of extruded AMCs
Contibutors: Shabani, Mohsen Ostad (author) / Tofigh, Ali Asghar (author) / Rahimipour, Mohammad Reza (author) / Razavi, Mansour (author) / Mazahéri, Aly (author) / Heydari, Fatemeh (author)
Source: Materiali in tehnologije
Numbering: 2014, volume 48, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (350 kB)
1. TXT document (36 kB)
Operational process simulation and optimization of a continuous-discharge system in a backfilling...
Contibutors: Ren, Weicheng (author) / Wang, Shaohuai (author) / Gao, Rugao (author) / Qiao, Dengpan (author)
Source: Materiali in tehnologije
Numbering: 2019, volume 53, issue 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (3998 kB)
1. TXT document (28 kB)
Preliminary numerical experiments in multiobjective optimization of a metallurgical production pr...
Contibutors: Filipič, Bogdan (author) / Tušar, Tea (author) / Laitinen, Erkki (author)
Source: Informatica (Ljubljana)
Numbering: 2007, volume 31, issue 2
Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)
1. PDF document (185 kB)
1. TXT document (27 kB)
Modeling and experimental analysis of Al2219/n-TiC/Gr powder-based process parameters using desir...
Contibutors: Jeevanantham, Ponnusamy (author) / Kumaresan, Krishnasamy (author) / Noorbasha, Zeelanbasha (author)
Source: Materiali in tehnologije
Numbering: 2018, volume 52, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (3913 kB)
1. TXT document (27 kB)
Optimization of the process parameters of friction-welded St-Al joints
Contibutors: Sahin, Mumin (author) / Misirli, Cenk (author) / Selvi, Selcuk (author)
Source: Materiali in tehnologije
Numbering: 2019, volume 53, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (3412 kB)
1. TXT document (28 kB)
Optimization of the die-sinking micro-EDM process for multiple performance characteristics using ...
Contibutors: Kadirvel, Arumugam (author) / Hariharan, Pillai (author)
Source: Materiali in tehnologije
Numbering: 2014, volume 48, issue 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (142 kB)
1. TXT document (27 kB)
Evolutionary multiobjective optimization based on Gaussian process modeling
Contibutors: Mlakar, Miha (author)
Source: Informatica (Ljubljana)
Numbering: 2015, volume 39, issue 4
Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)
1. PDF document (189 kB)
1. TXT document (9 kB)
A simulation approach to the process planning problem using a modified particle swarm optimization
Contibutors: Wang, J. F. (author) / Kang, W. L. (author) / Zhao, J. L. (author) / Chu, K. Y. (author)
Source: Advances in production engineering and management
Numbering: 2016, volume 11, issue 2
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (810 kB)
1. TXT document (41 kB)
Multi-objective optimization of the turning process using a Gravitational Search Algorithm (GSA) ...
Contibutors: Klančnik, Simon (author) / Hrelja, Marko (author) / Balič, Jože (author) / Brezočnik, Miran (author)
Source: Advances in production engineering and management
Numbering: 2016, volume 11, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (480 kB)
1. TXT document (38 kB)
Application of Grey relation analysis (GRA) and Taguchi method for the parametric optimization of...
Contibutors: Aydin, Hakan (author) / Bayram, Ali (author) / Esme, Ugur (author) / Kazancoglu, Yugut (author) / Guven, Onur (author)
Source: Materiali in tehnologije
Numbering: 2010, volume 44, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (398 kB)
1. TXT document (25 kB)
Use of Grey based Taguchi method in ball burnishing process for the optimization of surface rough...
Contibutors: Esme, Ugur (author)
Source: Materiali in tehnologije
Numbering: 2010, volume 44, issue 3
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (408 kB)
1. TXT document (27 kB)
Optimization of multi-process parameters according to the surface quality criteria in the end mil...
Contibutors: Durmuş, Hülya (author)
Source: Materiali in tehnologije
Numbering: 2012, volume 46, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (498 kB)
1. TXT document (26 kB)
Optimization of the secondary cooling in a continuous casting process with different slab cross-s...
Contibutors: Mauder, Tomás (author) / Štětina, Josef (author)
Source: Materiali in tehnologije
Numbering: 2014, volume 48, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (408 kB)
1. TXT document (17 kB)
Evaluation of the surface roughness and geometric accuracies in a drilling process using the Tagu...
Contibutors: Kabakli, Evren (author) / Bayramoglu, Melih (author) / Geren, Necdet (author)
Source: Materiali in tehnologije
Numbering: 2014, volume 48, issue 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (239 kB)
1. TXT document (35 kB)
A fuzzy-based optimal control algorithm for a continuous casting process
Contibutors: Mauder, Tomas (author) / Sandera, Cenek (author) / Stetina, Jozef (author)
Source: Materiali in tehnologije
Numbering: 2012, volume 46, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (220 kB)
1. TXT document (19 kB)
Optimization of the process parameters for surface roughness and tool life in face milling using ...
Contibutors: Sarikaya, Murat (author) / Dilipak, Hakan (author) / Gezgin, Akin (author)
Source: Materiali in tehnologije
Numbering: 2015, volume 49, issue 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (902 kB)
1. TXT document (39 kB)
Optimization of process parameters for machining of Al 7075 thin-walled structures
Contibutors: Borojević, S. (author) / Lukic, Dejan (author) / Milošević, Miloš (author) / Vukman, J. (author) / Kramar, Davorin (author)
Source: Advances in production engineering and management
Numbering: 2018, volume 13, issue 2
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1929 kB)
1. TXT document (38 kB)
Particle swarm optimization approach for modelling a turning process
Contibutors: Hrelja, Marko (author) / Klančnik, Simon (author) / Irgolič, Tomaž (author) / Paulič, Matej (author) / Jurković, Zoran (author) / Balič, Jože (author) / Brezočnik, Miran (author)
Source: Advances in production engineering and management
Numbering: 2014, volume 9, issue 1
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (567 kB)
1. TXT document (33 kB)
Experimental investigation for the optimization of the WEDM process parameters to obtain the mini...
Contibutors: Jayachandran, Shanthi (author) / Raman, Mohan (author) / Ramasamy, Thangavelu (author)
Source: Materiali in tehnologije
Numbering: 2019, volume 53, issue 3
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1860 kB)
1. TXT document (37 kB)
Multi-response optimization of GTAW process parameters in terms of energy efficiency and quality
Contibutors: Van, An-Le (author) / Nguyen, Thai-Chung (author) / Bui, Huu-Toan (author) / Dang, Xuan-Ba (author) / Nguyen, Trung Thanh (author)
Source: Strojniški vestnik
Numbering: 2024, volume 70, issue 5/6
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1390 kB)
1. TXT document (39 kB)
Process parameters optimization for maximizing tensile strength in friction stir-welded carbon steel
Contibutors: Bhatia, Anmol (author) / Wattal, Reeta (author)
Source: Strojniški vestnik
Numbering: 2021, volume 67, issue 6
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (2581 kB)
1. TXT document (41 kB)
Optimization of the internal roller burnishing process for energy reduction and surface properties
Contibutors: Nguyen, Trung Thanh (author) / Le, Minh-Thai (author)
Source: Strojniški vestnik
Numbering: 2021, volume 67, issue 4
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (2368 kB)
1. TXT document (44 kB)
Active structural derivator in the design crystallization phase of L7e vehicle structures
Contibutors: Jedrzejczyk, Roman Pawel (author) / Alb, Michael Sigmar (author)
Source: Strojniški vestnik
Numbering: 2019, volume 65, issue 3
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (4999 kB)
1. TXT document (88 kB)
Integrative CAE-driven design process in the embodiment design phase of L7e vehicle structures
Contibutors: Jedrzejczyk, Roman Pawel (author) / Alb, Michael Sigmar (author) / Jost, Thomas (author)
Source: Strojniški vestnik
Numbering: 2018, volume 64, issue 1
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (4173 kB)
1. TXT document (59 kB)
A weighted mean square error approach to the robust optimization of the surface roughness in an A...
Contibutors: Almeida, Fabrício Alves de (author) / Gomes, Guilherme Ferreira (author) / Paula, Vinícius Renó de (author) / Correa, Joao Ederson (author) / Paiva, Anderson Paulo de (author) / Freitas Gomes, José Henrique de (author) / Turrioni, Joao Batista (author)
Source: Strojniški vestnik
Numbering: 2018, volume 64, issue 3
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1194 kB)
1. TXT document (42 kB)
Application of numerical simulations in the deep-drawing process and the holding system with segm...
Contibutors: Volk, Mihael (author) / Nardin, Blaž (author) / Dolšak, Bojan (author)
Source: Strojniški vestnik
Numbering: 2011, volume 57, issue 9
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (2613 kB)
1. TXT document (18 kB)
Monitoring gas metal arc welding process by using audible sound signal
Contibutors: Horvat, Jožef (author) / Prezelj, Jurij (author) / Polajnar, Ivan (author) / Čudina, Mirko (author)
Source: Strojniški vestnik
Numbering: 2011, volume 57, issue 3
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (821 kB)
1. TXT document (32 kB)
Multi-objective optimization of the resistance spot-welding process parameters for the welding of...
Contibutors: Djuric, Aleksija (author) / Milčić, Dragan (author) / Klobčar, Damjan (author) / Marković, Biljana (author)
Source: Materiali in tehnologije
Numbering: 2021, volume 55, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (2770 kB)
1. TXT document (1 kB)
Process-parameter optimization of WEDM with Inconel 825 alloy using GRA
Contibutors: Subburaj, Arulselvan (author) / Ravindran, Durairaj (author) / Decruz, Arul Marcel Moshi Antony Joseph (author) / Dharmaraj, Vignesh Kumar (author)
Source: Materiali in tehnologije
Numbering: 2021, volume 55, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (4090 kB)
1. TXT document (1 kB)
Electrochemical impedance spectroscopy as a tool in the plate making process optimization
Contibutors: Cigula, Tomislav (author) / Fuchs-Godec, Regina (author) / Gojo, Miroslav (author) / Slemnik, Mojca (author)
Source: Acta chimica slovenica
Numbering: 2012, volume 59, issue 3
Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)
1. PDF document (262 kB)
1. TXT document (25 kB)
Pickling – passivation mechanism and process optimization of Q235 steel pipeline
Contibutors: Ji, Hongchao (author) / Cai, Shuo (author) / Zhu, Fengyun (author) / Pei, Weichi (author) / Xiao, Wenchao (author) / Tang, Xuefeng (author)
Source: Materiali in tehnologije
Numbering: 2023, volume 57, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (5525 kB)
1. TXT document (31 kB)
Biodecolorization of azo dye Acid Blue 92 (AB92) by Ceratophyllum demersum L.
Contibutors: Eftekhari, Zahra (author) / Norastehnia, Akbar (author) / Masoudian, Zahra (author)
Source: Acta agriculturae Slovenica
Numbering: 2023, volume 119, issue 2
Provider: Univerza v Ljubljani, Biotehniška fakulteta
(Obvezni izvod spletne publikacije)
1. PDF document (862 kB)
1. TXT document (54 kB)
Optimization of process parameters for a solid-state-welded AlSl 430 steel joint with the GRG rei...
Contibutors: Senthilkumar, G. (author) / Vinodkumar, V. (author) / Mayavan, T. (author) / Rathinasabapathi, G. (author) / David, Amos Gamaleal (author)
Source: Materiali in tehnologije
Numbering: 2023, volume 57, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (2319 kB)
1. TXT document (42 kB)
Investigation and optimization of MQL system parameters in the roller-burnishing process of harde...
Contibutors: Van, An-Le (author) / Nguyen, Trung Thanh (author)
Source: Strojniški vestnik
Numbering: 2022, volume 68, issue 3
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (2173 kB)
1. TXT document (39 kB)
Statistical modelling and optimization of TIG welding process parameters using Taguchi’s method
Contibutors: Omprakasam, S. (author) / Marimuthu, Kathiresan (author) / Raghu, R. (author) / Velmurugan, T. (author)
Source: Strojniški vestnik
Numbering: 2022, volume 68, issue 3
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (4659 kB)
1. TXT document (35 kB)
Optimization in the resistant spot-welding process of AZ61 magnesium alloy
Contibutors: Afshari, Davood (author) / Ghaffari, Ali (author) / Barsum, Zuheir (author)
Source: Strojniški vestnik
Numbering: 2022, volume 68, issue 7/8
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
1. PDF document (819 kB)
1. TXT document (32 kB)
Optimization of abrasive waterjet cutting by using the CODAS method with regard to interdependent...
Contibutors: Perec, Andrzej (author) / Kawecka-Wyrzykowska, Elżbieta (author) / Radomska-Zalas, Aleksandra (author) / Pude, Frank (author)
Source: Strojniški vestnik
Numbering: 2023, volume 69, issue 9/10
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (2458 kB)
1. TXT document (36 kB)
Enhancing product modelling process design and visual performance through random forest optimization
Contibutors: Cheng, Xin (author) / He, Hua (author)
Source: Informatica (Ljubljana)
Numbering: 2024, volume 48, issue 14
Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)
1. PDF document (694 kB)
1. TXT document (53 kB)
Evolutionary optimization of wire EDM process for the surface finish on a magnesium AZ91D alloy u...
Contibutors: Pradeepkumar, Madhesan (author) / Jesudason, Susan (author) / Sasikumar, Chandrasekaran (author) / Narasimharajan, Mani (author)
Source: Materiali in tehnologije
Numbering: 2024, volume 58, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1936 kB)
1. TXT document (32 kB)
The transformative role of artificial intelligence in human resources
Contibutors: Žibret, Klemen (author)
Source: Mednarodno inovativno poslovanje
Numbering: 2024, volume 16, issue 1
Provider: DOBA Fakulteta za uporabne poslovne in družbene študije Maribor
(Obvezni izvod spletne publikacije)
1. PDF document (297 kB)
1. TXT document (50 kB)
Realization, property and rights 2026 Narodna in univerzitetna knjižnica, Turjaška 1, 1000 Ljubljana