Digitalna knjižnica Slovenije

1. PDF document (1751 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effects of friction-welding parameters on the morphological properties of an Al/Cu bimetallic joint

Contibutors: Milašinović, Veljko D. (author) / Radovanović, Radovan V. (author) / Milašinović, Mijat D. (author) / Gligorijević, Bojan R. (author)

Identification of the material parameters of a unidirectional fiber composite using a micromodel

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (792 kB)

1. TXT document (30 kB)

Contibutors: Srbová, Hana (author) / Kroupa, Tomáš (author) / Zemčík, Robert (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (193 kB)

Influence of the process parameters on high-velocity oxygen-fuel-sprayed 75Cr3C2-25NiCr coatings

Contibutors: Nagulan, BalaGanesh (author) / Thamilkolundu, SenthilKumar (author) / Murugesan, Chandrasekar (author)

1. PDF document (1417 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effects of cutting parameters and tool-path strategies on tool acceleration in ball-end milling

Contibutors: Gok, Arif (author) / Gök, Kadir (author) / Bilgin, Mehmet Burak (author) / Alkan, Mehmet Ali (author)

1. PDF document (1380 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (79 kB)

Physicotechnical substantion of parameters of blasting operations in deep open pit mines

Contibutors: Shemetov, P. A. (author) / Bibik, I. P. (author)

1. PDF document (4159 kB)

Numbering: 2012, volume 59, issue 4

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. TXT document (46 kB)

Effect of quenching parameters on the mechanical properties of the 7A04 aluminium alloy

Contibutors: Shi, Dequan (author) / Kang, Kaijiao (author) / Gao, Guili (author)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (625 kB)

Computer tools to determine physical parameters in wooden houses

Contibutors: Bečkovský, David (author) / Vajkay, František (author) / Tichomirov, Vladimír (author)

Dimensional errors in selective laser melting products related to different orientations and proc...

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (604 kB)

1. TXT document (17 kB)

Contibutors: Pal, Snehashis (author) / Kokol, Vanja (author) / Gubeljak, Nenad (author) / Hadžistević, Miodrag (author) / Hudak, Radovan (author) / Drstvenšek, Igor (author)

1. PDF document (1144 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Izračun parametrov Weibullove porazdelitve za oceno upogibne trdnosti valovitih strešnih plošč

Contibutors: Ambrožič, Milan (author) / Vidović, Krunoslav (author)

Numbering: 2007, volume 41, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (147 kB)

Optimization of the process parameters for dry-sliding wear of an Al 2219-SiCp composite using th...

Contibutors: Ganesh, Radhakrishnan (author) / Chandrasekaran, Kesavan (author) / Ameen, Mohammed (author) / Kumar, Raja Pavan (author)

1. PDF document (1200 kB)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of a new methacrylic monomer on diode parameters of Ag/p-Si Schottky contact

Contibutors: Basman, Necati (author) / Uzun, Rukiye (author) / Ozcakir, Ramazan (author) / Erol, Ibrahim (author) / Cankaya, Guven (author) / Uzun, Orhan (author)

Source: Informacije MIDEM

Numbering: 2016, volume 46, issue 4

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (925 kB)

Micromechanical model of the substituents of a unidirectional fiber-reinforced composite and its ...

Contibutors: Kroupa, Tomáš (author) / Srbová, Hana (author) / Zemčík, Robert (author)

Numbering: 2015, volume 49, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (751 kB)

Effect of tool geometry and welding parameters on the microstructure and static strength of the f...

Contibutors: Abedini, Omid (author) / Ranjbarnodeh, Eslam (author) / Marashi, Seyed Pirooz Hoveida (author)

1. PDF document (3418 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

The influence of power supply voltage on exploitive parameters of the selected lamps

Contibutors: Górecki, Krzysztof (author)

Source: Informacije MIDEM

Numbering: 2013, volume 43, issue 3

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (841 kB)

Effect of cutting parameters on the drilling of AlSi7 metallic foams

Contibutors: Uzun, Gultekin (author) / Gokmen, Ugur (author) / Cinici, Hanifi (author) / Turker, Mehmet (author)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (924 kB)

Effects of technological parameters on the morphological, microstructural and mechanical behavior...

Contibutors: Li, Wen (author) / Sheng, Lei (author) / Xia, Yuanhao (author) / Amirfazli, Alidad (author) / Lu, Yalin (author)

1. PDF document (3340 kB)

Numbering: 2020, volume 54, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Optimising the effect of cutting parameters on the average surface roughness in a turning process...

Contibutors: Akkuş, Harun (author)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (287 kB)

Molecular dynamics simulation of Ti-6Al-4V diffusion bonding behavior under different process par...

Contibutors: Liu, Xiaogang (author) / Xu, Lei (author) / Zhang, Sun (author)

1. PDF document (4917 kB)

Numbering: 2020, volume 54, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

The transferability of fracture-mechanics parameters to fracture performance evaluation of welds ...

Contibutors: Toyoda, Masao (author) / Praunseis, Zdravko (author)

Investigating the effects of cutting parameters on the hole quality in drilling the Ti-6Al-4V alloy

Numbering: 2000, volume 34, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (803 kB)

1. TXT document (36 kB)

Contibutors: Çelik, Yahya Hişman (author)

1. PDF document (1441 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of mechanical-alloying parameters on the structure and properties of Cu47Ti34Zr11Ni8

Contibutors: Nowosielski, Ryszard (author) / Guwer, Aleksandra (author) / Matus, Krzysztof (author)

1. PDF document (3372 kB)

Numbering: 2020, volume 54, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Tensile properties of cold-drawn low-carbon steel wires under different process parameters

Contibutors: Çetinarslan, Cem S. (author) / Güzey, Ali (author)

Integrated statistical methodology for optimizing the machining parameters in SiC powder mixed - ...

Numbering: 2013, volume 47, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (760 kB)

1. TXT document (30 kB)

Contibutors: Modi, Manoj (author) / Agarwal, Gopal (author)

1. PDF document (1477 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (39 kB)

Optimization of machining parameters in turning of hybrid aluminium-matrix (LM24-SiCp-coconut she...

Contibutors: Arulraj, Munusamy (author) / Ponnusamy, Kumaraswamy Palani (author) / Venkatesh, Lakshmikanthan (author)

Development of intelligent knowledge-based computing environment for controling the proces parame...

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (880 kB)

1. TXT document (31 kB)

Contibutors: Krušič, Uroš (author) / Terčelj, Milan (author) / Kugler, Goran (author) / Peruš, Iztok (author)

1. PDF document (1707 kB)

Numbering: 2011, volume 58, issue 4

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

Influence of the tool geometry and process parameters on the static strength and hardness of fric...

Contibutors: Güler, Hande (author)

Comparison of homogenization approaches used for the identification of the material parameters of...

Numbering: 2015, volume 49, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (561 kB)

1. TXT document (16 kB)

Contibutors: Srbová, Hana (author) / Kroupa, Tomáš (author) / Lukeš, Vladimir (author)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (936 kB)

Review of low actuation voltage RF MEMS electrostatic switches based on metallic and carbon alloys

Contibutors: Mafinejad, Yasser (author) / Kouzani, Abbas (author) / Mafinezhad, Khalil (author)

Source: Informacije MIDEM

Numbering: 2013, volume 43, issue 2

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1693 kB)

1. TXT document (52 kB)

A comparison of parameters below the limit of detection in geochemical analyses by substitution m...

Contibutors: Verbovšek, Timotej (author)

1. PDF document (1110 kB)

Numbering: 2011, volume 58, issue 4

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

Identification and verification of the composite material parameters for the Ladeveze damage model

Contibutors: Kleisner, Václav (author) / Zemčík, Robert (author) / Kroupa, Tomáš (author)

Numbering: 2011, volume 45, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (457 kB)

Application of the Taguchi method to select the optimum cutting parameters for tangential cylindr...

Contibutors: Ozay, Cetin (author) / Ballikaya, Hasan (author) / Savas, Vedat (author)

The effect of the welding parameters and the coupling agent on the welding of composites

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (812 kB)

1. TXT document (34 kB)

Contibutors: Erdogan, Ertugrul Selcuk (author) / Huner, Umit (author)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (872 kB)

Material parameters for a numerical simulation of a compaction process for sintered double-height...

Contibutors: Verlak, Tomaž (author) / Šori, Marko (author) / Glodež, Srečko (author)

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (865 kB)

Physical regularities in the cracking of nanocoatings and a method for an automated determination...

Contibutors: Maruščak, P. O. (author) / Gliha, Vladimir (author) / Konovalenko, Igor (author) / Vuherer, Tomaž (author) / Panin, Sergey (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (262 kB)

Effect of the tool geometry and welding parameters on the macrostructure, fracture mode and weld ...

Contibutors: Bilici, Mustafa Kemal (author) / Yükler, Ahmet Ýrfan (author) / Kastan, Alim (author)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (860 kB)

Optimization of the turning parameters for the cutting forces in the Hastelloy X superalloy based...

Contibutors: Altin, Abdullah (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (230 kB)

Optimization of the machining parameters in the electrochemical micro-machining of nickel

Contibutors: Krishnan, Rajendiran (author) / Duraisamy, Saravanan (author) / Palanisamy, Parthiban (author) / Veeramani, Anandakrishnan (author)

Numbering: 2018, volume 52, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (503 kB)

Weldability of metal matrix composite plates by friction stir welding at low welding parameters

Contibutors: Bozkurt, Yahya (author)

Influence of process parameters on the corrosion resistance of corrugated austenitic and duplex s...

Numbering: 2011, volume 45, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (551 kB)

1. TXT document (24 kB)

Contibutors: Alvarez M., Sandra (author) / Bautista, Asunción (author) / Velasco, F. (author)

Numbering: 2013, volume 47, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (796 kB)

Influence of weld-process parameters on the material characterization of the friction-stir-welded...

Contibutors: Patil, Hiralal (author) / Soman, Sanjay (author)

1. PDF document (1876 kB)

Numbering: 2013, volume 47, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Small signal modeling of scaled double-gate MOSFET for GHz applications

Contibutors: Sood, Himangi (author) / Srivastava, Viranjay M. (author) / Singh, Ghanshyam (author)

Source: Informacije MIDEM

Numbering: 2017, volume 47, issue 1

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1606 kB)

1. TXT document (35 kB)

Optimization of the machining parameters for the turning of 15-5 PH stainless steels using the Ta...

Contibutors: Çetin, Şerif (author) / Kivak, Turgay (author)

1. PDF document (1238 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Changes in the composite structure and parameters after an exposure to a synergic action of vario...

Contibutors: Melichar, Tomáš (author) / Dufka, Ámos (author) / Bydžovský, Jiří (author)

1. PDF document (2832 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Predicting the microstructure evolution for the warm skew rolling of bearing steel balls under di...

Contibutors: Huo, Yuanming (author) / He, Tao (author) / Hu, Yujia (author) / Shen, Menglan (author) / Sun, Bo (author) / Zhao, Tong (author)

1. PDF document (4072 kB)

Numbering: 2020, volume 54, iss. 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Modeling and experimental analysis of Al2219/n-TiC/Gr powder-based process parameters using desir...

Contibutors: Jeevanantham, Ponnusamy (author) / Kumaresan, Krishnasamy (author) / Noorbasha, Zeelanbasha (author)

1. PDF document (3913 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

The influence of some parameters on the flow properties of bulk solids

Contibutors: Hann, Damjan (author)

Source: Strojniški vestnik

Numbering: 2009, volume 55, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (1026 kB)

1. TXT document (18 kB)

Effect of the processing parameters on the microstructure and properties of the ZL116 aluminium a...

Contibutors: Pan, Tingting (author) / He, Tao (author) / Huo, Yuanming (author) / Chen, Shoushuang (author) / Yu, Kuanping (author) / Sun, Anna (author)

1. PDF document (1446 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (31 kB)

Primerjava sočasnih meritev elektrokemijskega šuma in mehanskih parametrov med procesi napetostno...

Contibutors: Bajt Leban, Mirjam (author) / Doleček, Valter (author) / Legat, Andraž (author) / Kuhar, Viljem (author)

1. PDF document (1303 kB)

Numbering: 2000, volume 34, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of process parameters on hydrogen content in steel melt

Contibutors: Knap, Matjaž (author) / Rozman, Alojz (author) / Lamut, Jakob (author)

1. PDF document (1479 kB)

Numbering: 2013, volume 60, issue 4

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. TXT document (20 kB)

Optimization of the process parameters of friction-welded St-Al joints

Contibutors: Sahin, Mumin (author) / Misirli, Cenk (author) / Selvi, Selcuk (author)

1. PDF document (3412 kB)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

The influence of the surface roughness on the drawing parameters of aluminum-alloy auto-body sheets

Contibutors: Delijić, Kemal (author) / Mišović, Mitar (author)

Numbering: 2001, volume 35, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (231 kB)

The influence of MIM and sintering-process parameters on the mechanical properties of 316L SS

Contibutors: Berginc, Boštjan (author) / Kampuš, Zlatko (author) / Šuštaršič, Borivoj (author)

Numbering: 2006, volume 40, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (607 kB)

The influence of process parameters on the mechanical properties of friction-stir-welded joints o...

Contibutors: Milčić, Miodrag (author) / Vuherer, Tomaž (author) / Radisavljević, Igor (author) / Milčić, Dragan (author) / Kramberger, Janez (author)

1. PDF document (1258 kB)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Determination of the cause of the formation of transverse internal cracks on a continuously cast ...

Contibutors: Franěk, Zdeněk (author) / Masarik, Miloš (author) / Šmíd, Jaromír (author)

Experimental study and analysis of the wear properties of friction-stir-welded AA7075-T6 and A384...

Numbering: 2015, volume 49, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (545 kB)

1. TXT document (29 kB)

Contibutors: Anganan, Karuppannan (author) / Prabagaran, Subramaniam (author) / Muthukrishnan, Mayakrishnan (author)

1. PDF document (1027 kB)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of sintering parameters on the density, microstructure and mechanical properties of the ni...

Contibutors: Butković, Samir (author) / Oruč, Mirsada (author) / Šarić, Emir (author) / Mehmedović, Muhamed (author)

Effects of solidification parameters on the micro- and macrostructure of the X19CrMoVNbN11-1 steel

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (216 kB)

1. TXT document (24 kB)

Contibutors: Koležnik, Mitja (author) / Nagode, Aleš (author) / Klančnik, Grega (author) / Medved, Jože (author) / Janet, Bernarda (author) / Bizjak, Milan (author) / Kosec, Ladislav (author)

1. PDF document (2504 kB)

Numbering: 2013, volume 47, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (21 kB)

Study of the properties and structure of selected tool steels for cold work depending on the para...

Contibutors: Kuřík, Martin (author) / Lacza, Jakub (author) / Vlach, Tomáš (author) / Sobotová, Jana (author)

1. PDF document (1435 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (24 kB)

Predictive model and optimization of processing parameters for plastic injection moulding

Contibutors: Kramar, Davorin (author) / Cica, Djordje (author)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (514 kB)

New methods for modern technology for the evaluation of spatial parameters of underground structures

Contibutors: Kos, Andrej (author) / Novaković, Gregor (author) / Uršič, Luka (author) / Vulić, Milivoj (author)

1. PDF document (4322 kB)

Numbering: 2013, volume 60, issue 2

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. TXT document (21 kB)

Artificial tooth and polymer-base bond in removable dentures: the influence of pre-treatment on t...

Contibutors: Pavlin, Martin (author) / Rudolf, Rebeka (author) / Jerolimov, Vjekoslav (author)

FSW welding of Al-Mg alloy plates with increased edge roughness using square pin tools of various...

Numbering: 2008, volume 55, issue 2

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (451 kB)

1. TXT document (13 kB)

Contibutors: Baloš, Sebastian (author) / Šiđanin, Leposava P. (author) / Dramićanin, Miroslav D. (author) / Labus Zlatanović, Danka (author) / Antić, Aco (author)

1. PDF document (1870 kB)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of process parameters on the microstructure and mechanical properties of friction-welded j...

Contibutors: Kirik, Ihsan (author) / Özdemir, Niyazi (author)

1. PDF document (2301 kB)

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Modeling and optimization of parameters for minimizing surface roughness and tool wear in turning...

Contibutors: Tamang, S. K. (author) / Chandrasekaran, Margam (author)

Source: Advances in production engineering and management

Numbering: 2015, volume 10, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (943 kB)

1. TXT document (47 kB)

Influence of geometric parameters of a pin joint of a carbon/epoxy composite plate on its load ca...

Contibutors: Krystek, Jan (author) / Bek, Lukáš (author) / Kroupa, Tomáš (author) / Kottner, Radek (author)

Optimizacija procesnih parametrov pri kontinuiranem ulivanju jekla v železarni ACRONI Jesenice (1997, volume 31, issue 5)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (489 kB)

1. TXT document (11 kB)

Contibutors: Filipič, Bogdan (author) / Šarler, Božidar (author)

Source: Kovine zlitine tehnologije

Provider: Narodna in univerzitetna knjižnica

1. PDF document (1033 kB)

Influence of parameters of the flanged open-ended coaxial probe measurement setup on permittivity...

Contibutors: Koselj, Jure (author) / Bregar, Vladimir Boštjan (author)

Source: Informacije MIDEM

Numbering: 2012, volume 42, issue 1

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (245 kB)

Optimization of the parameters for the surfactant-added EDM of a Ti-6Al-4V alloy using the GRA-Ta...

Contibutors: Kolli, Murahari (author) / Adepu, Kumar (author)

Effects of processing parameters on the microstructure and mechanical properties of Al-Si-Cu allo...

Numbering: 2016, volume 50, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (730 kB)

1. TXT document (48 kB)

Contibutors: Yu, Kuanping (author) / He, Tao (author) / Huo, Yuanming (author) / Chen, Shoushuang (author) / Pan, Tingting (author) / Dong, Xingqian (author)

1. PDF document (2514 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Injection of brown-coal tar in a statistical relationship with the significant parameters of a bl...

Contibutors: Pustějovská, Pavlína (author) / Jursová, Simona (author) / Brožová, Silvie (author) / Pivko, Michal (author)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (160 kB)

The effect of a superplasticizer admixture on the mechanical fracture parameters of concrete

Contibutors: Šimonová, Hana (author) / Havlíková, Ivana (author) / Daněk, Petr (author) / Keršner, Zbyněk (author) / Vymazal, Tomáš (author)

Optimization of the drilling parameters for the cutting forces in B4C-reinforced Al-7XXX-series a...

Numbering: 2015, volume 49, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (908 kB)

1. TXT document (20 kB)

Contibutors: Taşkesen, Ahmet (author) / Kütükde, Kenan (author)

Numbering: 2013, volume 47, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (596 kB)

Influence of the process parameters and the mechanical properties of aluminum alloys on the burr ...

Contibutors: Köglü, Ugur (author)

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (186 kB)

Laser cladding in the use effects on nitrided and PVD coated steels used for die-casting using va...

Contibutors: Bombač, David (author) / Fazarinc, Matevž (author) / Pleterski, Matej (author) / Tušek, Janez (author) / Muhič, Tadej (author)

1. PDF document (1622 kB)

Numbering: 2009, volume 56, issue 3

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

Significance of the radiographic parameters in the diagnosis and treatment of a bony impingement ...

Contibutors: Meglič, Uroš (author) / Zupanc, Oskar (author)

Meritve in kontrola tehnoloških parametrov valjanja

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (189 kB)

1. TXT document (17 kB)

Contibutors: Fajfar, Peter (author) / Turk, Radomir (author)

Source: Kovine zlitine tehnologije

Numbering: 1999, volume 33, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (485 kB)

Determination of the optimal cutting parameters for machining technical plastics

Contibutors: Mošorinski, Predrag (author) / Prvulović, Slavica (author) / Josimović, Ljubiša (author)

1. PDF document (1069 kB)

Numbering: 2020, volume 54, iss. 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Analiza vpliva procesnih parametrov na kontinuirano ulivanje zlitine Al4.5CuPbBi

Contibutors: Sabolič Mijovič, Mojca (author) / Šarler, Božidar (author)

Source: Kovine zlitine tehnologije

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (285 kB)

Optimizing the parameters for friction welding stainless steel to copper parts

Contibutors: Sahin, Mumin (author)

1. PDF document (2239 kB)

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Cold-cathode ionization gauge - preprocessing and modelling of the gauge parameters using neural ...

Contibutors: Irmančnik-Belič, Lidija (author) / Belič, Igor (author) / Erjavec, Bojan (author) / Šetina, Janez (author)

Numbering: 2002, volume 36, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (145 kB)

Machining parameters influencing in electro chemical machining on AA6061 MMC

Contibutors: Chentil Jegan, Thankaraj Mariapushpam (author) / Ravindran, Durairaj (author) / Dev Anand, M. (author)

Determination of the mechanical parameters of a bonded joint between a metal and a composite by c...

Numbering: 2016, volume 50, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (614 kB)

1. TXT document (44 kB)

Contibutors: Bernardin, Petr (author) / Vacík, Josef (author) / Kroupa, Tomáš (author) / Kottner, Radek (author)

1. PDF document (1021 kB)

Numbering: 2013, volume 47, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Investigating the effects of cutting parameters on the built-up-layer and built-up-edge formation...

Contibutors: Bilgin, Mehmet Burak (author)

1. PDF document (1240 kB)

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Increasing micro-purity and determining the effects of the production with and without vacuum ref...

Contibutors: Kurka, Vladislav (author) / Pindor, Jaroslav (author) / Kosňovská, Jana (author) / Adolf, Zdeněk (author)

1. PDF document (2651 kB)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Optimization of multi-process parameters according to the surface quality criteria in the end mil...

Contibutors: Durmuş, Hülya (author)

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (498 kB)

Study of process parameters on Al-7.0 % Si-0.45 % Mg alloy cast trough strain induced melt activa...

Contibutors: Sharma, Ashok (author) / Gupta, S. K. (author) / Srikanth, Madhulika (author)

1. PDF document (1016 kB)

Numbering: 2012, volume 59, issue 1

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. TXT document (16 kB)

Analysis of process parameters for a surface-grinding process based on the Taguchi method

Contibutors: Külekci, Mustafa Kemal (author)

Numbering: 2013, volume 47, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (274 kB)

Effect of alternative heat-treatment parameters on the aging behavior of short-fiber-reinforced 2...

Contibutors: Altunpak, Yahya (author) / Aslan, Serdar (author) / Oguz Güler, Mehmet (author) / Akbulut, Hatem (author)

Meritve visokega in ultravisokega vakuuma z invertnim magnetronom in linearizacija karakteristik ...

Numbering: 2016, volume 50, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (673 kB)

1. TXT document (31 kB)

Contibutors: Irmančnik-Belič, Lidija (author) / Belič, Igor (author) / Erjavec, Bojan (author) / Šetina, Janez (author)

Numbering: 2001, volume 35, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (147 kB)

Optimization of the process parameters for surface roughness and tool life in face milling using ...

Damage morphological parameters

Contibutors: Chermant, Jean-Louis (author) / Boitier, Guillaume (author) / Darzens, Severine (author) / Coster, Michel (author) / Chermant, Liliane (author)

Source: Image analysis and stereology

Numbering: 2001, volume 20, issue 3

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. PDF document (250 kB)

1. TXT document (15 kB)

Contibutors: Sarikaya, Murat (author) / Dilipak, Hakan (author) / Gezgin, Akin (author)

Effects of variations in alloy content and machining parameters on the strength of the intermetal...

Numbering: 2015, volume 49, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (902 kB)

1. TXT document (39 kB)

Contibutors: Acar, Ahu Fahriye (author) / Ozturk, Fahrettin (author) / Bayrak, Mustafa (author)

Prediction of superconducting transition temperature using a machine-learning method

Numbering: 2010, volume 44, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (441 kB)

1. TXT document (21 kB)

Contibutors: Liu, Yao (author) / Zhang, Huiran (author) / Xu, Yan (author) / Li, Shengzhou (author) / Dai, Dongbo (author) / Li, Chengfan (author) / Ding, Guangtai (author) / Shen, Wenfeng (author) / Qian, Quan (author)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (385 kB)

Experimental investigation for the optimization of the WEDM process parameters to obtain the mini...

Contibutors: Jayachandran, Shanthi (author) / Raman, Mohan (author) / Ramasamy, Thangavelu (author)

1. PDF document (1860 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Friction-stir welding of high-strength aluminium alloys and a numerical simulation of the plunge ...

Contibutors: Perović, Milenko A. (author) / Veljić, Darko (author) / Rakin, Marko (author) / Radović, Nenad (author) / Sedmak, Aleksandar (author) / Bajic, Nikola (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (617 kB)

WEDM cutting of Inconel 718 nickel-based superalloy: effects of cutting parameters on the cutting...

Contibutors: Çaydaş, Ulaş (author) / Ay, Mustafa (author)

1. PDF document (3747 kB)

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Investigations on the influence of selected factors on thermal parameters of impulse-transformers

Contibutors: Górecki, Krzysztof (author) / Górski, Krzysztof (author) / Zarębski, Janusz (author)

Source: Informacije MIDEM

Numbering: 2017, volume 47, issue 1

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (2437 kB)

1. TXT document (45 kB)

Profiling and analysis of the overconsolidation ratio and strength parameters in hungarian soils ...

Contibutors: Józsa, Vendel (author)

1. PDF document (2208 kB)

Numbering: 2013, volume 60, issue 3

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

Effects of fabrication parameters on the oxidation resistance of wood/phenolic resin carbon compo...

Contibutors: Tao, Yubo (author) / Li, Peng (author)