Digitalna knjižnica Slovenije

Numbering: 2008, volume 42, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (237 kB)

Examination and modelling of the influence of cutting parameters on the cutting force and the sur...

Contibutors: Bajić, Dražen (author) / Lela, Branimir (author) / Cukor, Goran (author)

1. PDF document (1643 kB)

Numbering: 2008, volume 54, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Vpliv lesne vrste na hrapavost zunanjega sloja in prostorninsko maso brušenih ivernih plošč

Contibutors: Medved, Sergej (author)

Source: Les (Ljubljana)

Numbering: 1999, volume 51, issue 5

Provider: Zveza lesarjev Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (300 kB)

Prediction of surface roughness in the ball-end milling process using response surface methodolog...

Contibutors: Sekulić, Milenko (author) / Pejić, Vlastimir (author) / Brezočnik, Miran (author) / Gostimirović, Marin (author) / Hadžistević, Miodrag (author)

Source: Advances in production engineering and management

Numbering: 2018, volume 13, issue 1

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (818 kB)

Experimental examination of main cutting force and surface roughness depending on cutting parameters

Contibutors: Korkut, Ihsan (author) / Boy, Mehmet (author)

The coating of a NiTi alloy has a greater impact on the mechanical properties than the acidity of...

Numbering: 2008, volume 54, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (146 kB)

1. TXT document (21 kB)

Contibutors: Pop Acev, Darko (author) / Katic, Visnja (author) / Turco, Gianluca (author) / Contardo, Luca (author) / Spalj, Stjepan (author)

Numbering: 2018, volume 52, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (268 kB)

Experimental design and artificial neural network model for turning the 50CrV4 (SAE 6150) alloy u...

Contibutors: Tolga Ozkan, Murat (author) / Ulas, Hasan Basri (author) / Bilgin, Musa (author)

Lacunarity properties of nanophotonic materials based on poly(methyl methacrylate) for contact le...

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (517 kB)

1. TXT document (38 kB)

Contibutors: Tomić, Marija (author) / Bojović, Božica (author) / Stamenković, Dragomir (author) / Mileusnić, Ivana (author) / Koruga, Djuro (author)

1. PDF document (1052 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Analysis of the cutting temperature and surface roughness during the orthogonal machining of AISI...

Contibutors: Motorcu, Ali Riza (author) / Isik, Yahya (author) / Kus, Abdil (author) / Cakir, Mustafa Cemal (author)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (821 kB)

A review of the surface modifications of titanium alloys for biomedical applications

Contibutors: Manjaiah, Mallaiah (author) / Laubscher, R. F. (author)

1. PDF document (1360 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (71 kB)

Multiple regression modeling and prediction of the surface roughness in the WEDM process

Contibutors: Kulekci, Mustafa Kemal (author) / Akkurt, Adnan (author) / Esme, Ugur (author) / Ozkul, Iskender (author)

Optimising the effect of cutting parameters on the average surface roughness in a turning process...

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (308 kB)

1. TXT document (23 kB)

Contibutors: Akkuş, Harun (author)

Optimization of machining parameters in turning of hybrid aluminium-matrix (LM24-SiCp-coconut she...

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (287 kB)

1. TXT document (22 kB)

Contibutors: Arulraj, Munusamy (author) / Ponnusamy, Kumaraswamy Palani (author) / Venkatesh, Lakshmikanthan (author)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (880 kB)

Analysis of surface roughness in the Sveta Magdalena paleo-landslide in the Rebrnice area

Contibutors: Popit, Tomislav (author) / Verbovšek, Timotej (author)

Source: RMZ-materials and geoenvironment

Numbering: 2013, volume 60, issue 3

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (5010 kB)

Application of the Taguchi method to select the optimum cutting parameters for tangential cylindr...

Contibutors: Ozay, Cetin (author) / Ballikaya, Hasan (author) / Savas, Vedat (author)

Machinability of a Ti-6Al-4V alloy with cryogenically treated cemented carbide tools

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (812 kB)

1. TXT document (34 kB)

Contibutors: Mavi, Ahmet (author) / Korkut, Ihsan (author)

Application of a Taguchi-based neural network for forecasting and optimization of the surface rou...

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (899 kB)

1. TXT document (16 kB)

Contibutors: Kazancoglu, Yugut (author) / Esme, Ugur (author) / Kulekci, Mustafa Kemal (author) / Kahraman, Funda (author) / Samur, Ramazan (author) / Akkurt, Adnan (author) / Ipekci, Melih Turan (author)

Surface roughness assessing based on digital image features

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (273 kB)

1. TXT document (24 kB)

Contibutors: Šimunović, Goran (author) / Svalina, I. (author) / Simunovic, K. (author) / Šarić, Tomislav (author) / Havrlisan, S. (author) / Vukelić, Djordje (author)

Source: Advances in production engineering and management

Numbering: 2016, volume 11, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1425 kB)

1. TXT document (41 kB)

Optimization of the surface roughness by applying the Taguchi technique for the turning of stainl...

Contibutors: Sarikaya, Murat (author)

1. PDF document (1093 kB)

Numbering: 2015, volume 49, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (38 kB)

Determination of nano-roughness for micro-objects by measuring the van der Waals force

Contibutors: Bratina, Božidar (author) / Šafarič, Jakob (author) / Uran, Suzana (author) / Šafarič, Riko (author)

Source: Advances in production engineering and management

Numbering: 2019, volume 14, issue 1

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1635 kB)

1. TXT document (43 kB)

Experimental investigation of the microhardness and surface roughness of a pressure-die-casted A4...

Contibutors: Raghunayagan, Parameswaran (author) / Murugarajan, Angamuthu (author)

1. PDF document (3036 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Optimization of the machining parameters for the turning of 15-5 PH stainless steels using the Ta...

Contibutors: Çetin, Şerif (author) / Kivak, Turgay (author)

1. PDF document (1238 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effects of various helically angled grinding wheels on the surface roughness and roundness in gri...

Contibutors: Gavas, Muammer (author) / Kina, Muammer (author) / Köklü, Ugur (author)

1. PDF document (1176 kB)

Numbering: 2015, volume 49, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (24 kB)

Investigation of the cutting forces and surface roughness in milling carbon-fiber-reinforced poly...

Contibutors: Bayraktar, Senol (author) / Turgut, Yakup (author)

1. PDF document (1131 kB)

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (47 kB)

Effect of cryogenic treatment applied to M42 HSS drills on the machinability of Ti-6Al-4V alloy

Contibutors: Kivak, Turgay (author) / Seker, Ulvi (author)

1. PDF document (1348 kB)

Numbering: 2015, volume 49, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (41 kB)

The influence of the surface roughness on the drawing parameters of aluminum-alloy auto-body sheets

Contibutors: Delijić, Kemal (author) / Mišović, Mitar (author)

Minimization of the surface roughness and form error on the milling of free-form surfaces using a...

Numbering: 2001, volume 35, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (231 kB)

1. TXT document (14 kB)

Contibutors: Kurt, Mustafa (author) / Hartomacioglu, Selim (author) / Mutlu, Bilçen (author) / Köklü, Ugur (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (970 kB)

FSW welding of Al-Mg alloy plates with increased edge roughness using square pin tools of various...

Contibutors: Baloš, Sebastian (author) / Šiđanin, Leposava P. (author) / Dramićanin, Miroslav D. (author) / Labus Zlatanović, Danka (author) / Antić, Aco (author)

1. PDF document (1870 kB)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Modeling and optimization of parameters for minimizing surface roughness and tool wear in turning...

Contibutors: Tamang, S. K. (author) / Chandrasekaran, Margam (author)

Source: Advances in production engineering and management

Numbering: 2015, volume 10, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (943 kB)

1. TXT document (47 kB)

Optimization of the parameters for the surfactant-added EDM of a Ti-6Al-4V alloy using the GRA-Ta...

Contibutors: Kolli, Murahari (author) / Adepu, Kumar (author)

A model of surface roughness constitution in the metal cutting process applying tools with define...

Numbering: 2016, volume 50, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (730 kB)

1. TXT document (48 kB)

Contibutors: Adamczak, Stanisĺaw (author) / Miko, Edward (author) / Čuš, Franc (author)

Numbering: 2009, volume 55, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (474 kB)

The effects of cutting speed and feed rate on Bue-Bul formation, cutting forces and surface rough...

Contibutors: Gokkaya, Hasan (author) / Taskesen, Ahmet (author)

1. PDF document (1124 kB)

Numbering: 2008, volume 54, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (27 kB)

A cost-effective approach to the rapid fabrication of functional metal prototypes

Contibutors: Kuo, Chil-Chyuan (author)

Influence of the process parameters and the mechanical properties of aluminum alloys on the burr ...

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (251 kB)

1. TXT document (22 kB)

Contibutors: Köglü, Ugur (author)

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (186 kB)

Machining parameters influencing in electro chemical machining on AA6061 MMC

Contibutors: Chentil Jegan, Thankaraj Mariapushpam (author) / Ravindran, Durairaj (author) / Dev Anand, M. (author)

Numbering: 2016, volume 50, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (614 kB)

Use of Grey based Taguchi method in ball burnishing process for the optimization of surface rough...

Contibutors: Esme, Ugur (author)

Optimization of multi-process parameters according to the surface quality criteria in the end mil...

Numbering: 2010, volume 44, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (408 kB)

1. TXT document (27 kB)

Contibutors: Durmuş, Hülya (author)

Evaluation of the surface roughness and geometric accuracies in a drilling process using the Tagu...

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (498 kB)

1. TXT document (26 kB)

Contibutors: Kabakli, Evren (author) / Bayramoglu, Melih (author) / Geren, Necdet (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (239 kB)

Vpliv mikrostrukture aluminijevih zlitin s silicijem na hrapavost površine po finem struženju (1997, volume 31, issue 5)

Contibutors: Grum, Janez (author)

Source: Kovine zlitine tehnologije

Provider: Narodna in univerzitetna knjižnica

1. PDF document (1446 kB)

Optimization of the process parameters for surface roughness and tool life in face milling using ...

Contibutors: Sarikaya, Murat (author) / Dilipak, Hakan (author) / Gezgin, Akin (author)

Optimization of surface roughness in finish milling of AISI P20+S plastic-mold steel

Numbering: 2015, volume 49, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (902 kB)

1. TXT document (39 kB)

Contibutors: Kara, Fuat (author)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (679 kB)

Artificial neural network modeling for surface roughness prediction in cylindrical grinding of Al...

Contibutors: Chandrasekaran, Margam (author) / Devarasiddappa, D. (author)

Source: Advances in production engineering and management

Numbering: 2014, volume 9, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (969 kB)

Investigation of hole profiles in deep micro-hole drilling of AISI 420 stainless steel using powd...

Contibutors: Yilmaz, Volkan (author)

1. PDF document (1021 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Using MANOVA to investigate the machining performance of Al2O3 + TiC insert during the turning of...

Contibutors: Paengchit, Phacharadit (author) / Saikaew, Charnnarong (author)

1. PDF document (1078 kB)

Numbering: 2019, volume 53, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Experimental investigation for the optimization of the WEDM process parameters to obtain the mini...

Contibutors: Jayachandran, Shanthi (author) / Raman, Mohan (author) / Ramasamy, Thangavelu (author)

1. PDF document (1860 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Izbrani vidiki celovitosti površine aluminijeve zlitine pri običajni in obdelavi z velikimi hitro...

Contibutors: Vaněček, David (author) / Mádl, Jan (author) / Soković, Mirko (author)

Uporaba napredne 3D-merilne naprave v tehniki

Numbering: 2003, volume 49, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (225 kB)

1. TXT document (23 kB)

Contibutors: Grguraš, Damir (author) / Čerče, Luka (author) / Kramar, Davorin (author) / Pušavec, Franci (author)

Source: Ventil (Ljubljana)

Numbering: 2017, volume 23, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1595 kB)

1. TXT document (22 kB)

Surface roughness and land use in Slovenia

Contibutors: Hrvatin, Mauro (author, cartographer) / Perko, Drago (author, cartographer)

Source: Acta geographica Slovenica

Numbering: 2003, volume 43, issue 2

Provider: ZRC SAZU
(Obvezni izvod spletne publikacije)

1. PDF document (2345 kB)

1. TXT document (139 kB)

Determining the surface roughness coefficient by 3D scanner

Contibutors: Fifer Bizjak, Karmen (author)

Source: Geologija

Numbering: 2010, volume 53, issue 2

Provider: Geološki zavod Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (898 kB)

Quantified joint surface description and joint shear strength of small rock samples

Contibutors: Fifer Bizjak, Karmen (author) / Geršak, Andraž (author)

Source: Geologija

Numbering: 2018, volume 61, issue 1

Provider: Geološki zavod Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (1111 kB)

Primerjava metod za geomorfometrične analize hrapavosti površja na primeru Vipavske doline

Contibutors: Popit, Tomislav (author) / Supej, Blaž (author) / Kokalj, Žiga (author) / Verbovšek, Timotej (author)

Source: Geodetski vestnik

Numbering: 2016, volume 60, issue 2

Provider: Zveza geodetov Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (6291 kB)

1. TXT document (45 kB)

Comparison of artificial neural network, fuzzy logic and genetic algorithm for cutting temperatur...

Contibutors: Savković, Borislav (author) / Kovač, Pavel (author) / Rodic, D. (author) / Strbac, Branko (author) / Klančnik, Simon (author)

Source: Advances in production engineering and management

Numbering: 2020, volume 15, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1708 kB)

1. TXT document (56 kB)

Effect of sterilization on the surface properties of Ti6Al7Nb alloy femoral stems

Contibutors: Avsec, Klemen (author) / Conradi, Marjetka (author) / Jenko, Monika (author) / Kocjančič, Boštjan (author) / Debeljak, Mojca (author) / Gorenšek, Matevž (author) / Dolinar, Drago (author)

1. PDF document (3136 kB)

Numbering: 2021, volume 55, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Modeliranje topografskih lastnosti 3D tiskanih kovinskih materialov

Contibutors: Babič, Matej (author)

Source: Anali PAZU

Numbering: 2025, volume 15, issue 1/2

Provider: Združenje Pomurska akademsko znanstvena unija
(Obvezni izvod spletne publikacije)

1. PDF document (2953 kB)

1. TXT document (12 kB)

Experimental investigation of interfacial friction between FRPs-wrapped steel surface and cohensi...

Contibutors: Pannirselvam, Annie Sweetlin Jebarani Joshua (author) / Duraisamy, Daniel Thangaraj (author)

Minimum depth of milling to obtain the desired surface roughness in multi-layer materials

Numbering: 2020, volume 54, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (746 kB)

1. TXT document (21 kB)

Contibutors: Župerl, Uroš (author) / Irgolič, Tomaž (author) / Kovačič, Miha (author)

1. PDF document (1137 kB)

Numbering: 2020, volume 54, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effects of nozzle inner surface roughness on the performance of self-resonating cavitating waterj...

Contibutors: Li, Deng (author) / Kang, Yong (author) / Ding, Xiaolong (author) / Wang, Xiaochuan (author) / Fang, Zhenlong (author)

1. PDF document (2055 kB)

Numbering: 2017, volume 63, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Numerical and experimental study of frictional behavior in bending under tension test

Contibutors: Lemu, Hirpa G. (author) / Trzepieciński, Tomasz (author)

1. PDF document (1934 kB)

Numbering: 2013, volume 59, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Research on surface roughness of hardox steels parts machined by abrasive waterjet

Contibutors: Filip, Alexandru Catalin (author) / Morariu, Cristin Olimpiu (author) / Mihail, Laurentiu Aurel (author) / Oancea, Gheorghe (author)

Studying the performance of cutting carbon fibre-reinforced plastic using an abrasive water jet t...

Numbering: 2019, volume 65, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (718 kB)

1. TXT document (30 kB)

Contibutors: Hussien, Ahmed A. (author) / Qasem, Isam (author) / Kataraki, Pramodkumar S. (author) / Al-Kouz, Wael G. (author) / Janvekar, Ayub Ahmed (author)

Numbering: 2021, volume 67, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (980 kB)

Optimization of the internal roller burnishing process for energy reduction and surface properties

Contibutors: Nguyen, Trung Thanh (author) / Le, Minh-Thai (author)

1. PDF document (2368 kB)

Numbering: 2021, volume 67, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Obtaining the selected surface roughness by means of mathematical model based parameter optimizat...

Contibutors: Perec, Andrzej (author) / Pude, Frank (author) / Kaufeld, Michael (author) / Wegener, Konrad (author)

1. PDF document (1892 kB)

Numbering: 2017, volume 63, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Modeling and optimization of finish diamond turning of spherical surfaces based on response surfa...

Contibutors: Kramar, Davorin (author) / Cica, Djordje (author)

Source: Advances in production engineering and management

Numbering: 2021, volume 16, issue 3

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1192 kB)

Surface topography modelling for reduced friction

Contibutors: Sedlaček, Marko (author) / Vilhena, Luis Miguel Silva (author) / Podgornik, Bojan (author) / Vižintin, Jože (author)

Numbering: 2011, volume 57, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (785 kB)

Application of Taguchi method for surface roughness and roundness error in drilling of AISI 316 s...

Contibutors: Çiçek, Adem (author) / Kivak, Turgay (author) / Samtaş, Gürcan (author)

Numbering: 2012, volume 58, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (776 kB)

Cutting forces and surface roughness in face-milling of SKD61 hard steel

Contibutors: Hoang, Tien Dung (author) / Nguyen, Nhu-Tung (author) / Tran, Đuc Quy (author) / Nguyen, Van Thien (author)

1. PDF document (2993 kB)

Numbering: 2019, volume 65, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (43 kB)

The effect of surface roughness of end-mills on optimal cutting performance for high-speed machining

Contibutors: Chi-Hsiang, Chen (author) / Yung-Cheng, Wang (author) / Bean-Yin, Lee (author)

1. PDF document (1198 kB)

Numbering: 2013, volume 59, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (38 kB)

Study on the influence of metallic powder in near-dry electric discharge machining

Contibutors: Sundriyal, Sanjay (author) / Vipin, Vipin (author) / Walia, Ravinderjit Singh (author)

1. PDF document (3326 kB)

Numbering: 2020, volume 66, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Aspects of using tool axis inclination angle

Contibutors: Sadílek, Marek (author) / Čep, Robert (author) / Budak, Igor (author) / Soković, Mirko (author)

1. PDF document (1927 kB)

Numbering: 2011, volume 57, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Surface roughness control simulation of turning processes

Contibutors: Čuš, Franc (author) / Župerl, Uroš (author)

1. PDF document (2216 kB)

Numbering: 2015, volume 61, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

A weighted mean square error approach to the robust optimization of the surface roughness in an A...

Contibutors: Almeida, Fabrício Alves de (author) / Gomes, Guilherme Ferreira (author) / Paula, Vinícius Renó de (author) / Correa, Joao Ederson (author) / Paiva, Anderson Paulo de (author) / Freitas Gomes, José Henrique de (author) / Turrioni, Joao Batista (author)

1. PDF document (1194 kB)

Numbering: 2018, volume 64, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

A new parameter of statistic equality of sampling lengths in surface roughness measurement

Contibutors: Tomov, Mite (author) / Kuzinovski, Mikolaj (author) / Cichosz, Piotr (author)

1. PDF document (2017 kB)

Numbering: 2013, volume 59, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Study of vibration milling for improving surface finish of difficult-to-cut materials

Contibutors: Ostaševičius, Vytautas (author) / Gaidys, Rimvydas (author) / Dauksevicius, Rolanas (author) / Mikuckyte, Sandra (author)

1. PDF document (2245 kB)

Numbering: 2013, volume 59, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (27 kB)

Improvements in machinability of zinc oxide ceramics by laser-assisted milling

Contibutors: Muženič, David (author) / Dugar, Jaka (author) / Kramar, Davorin (author) / Jezeršek, Matija (author) / Pušavec, Franci (author)

1. PDF document (3447 kB)

Numbering: 2019, volume 65, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Modeling of the influence of cutting parameters on the surface roughness, tool wear and cutting f...

Contibutors: Bajić, Dražen (author) / Celent, Luka (author) / Jozić, Sonja (author)

1. PDF document (2497 kB)

Numbering: 2012, volume 58, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

A study for the nanofinishing of an EN-31 workpiece with pulse DC power supply using ball-end mag...

Contibutors: Singh, Himmat (author) / Niranjan, M. S. (author) / Wattal, Reeta (author)

1. PDF document (2602 kB)

Numbering: 2020, volume 66, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

The optimization of machining parameters using the Taguchi method for surface roughness of AISI 8...

Contibutors: Motorcu, Ali Riza (author)

Numbering: 2010, volume 56, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (233 kB)

Hardness effects on abrasive flow machining

Contibutors: Gov, Kursad (author) / Eyercioglu, Omer (author) / Cakir, Mehmed Veysel (author)

1. PDF document (5829 kB)

Numbering: 2013, volume 59, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (17 kB)

The effects of machining parameters on cutting forces, surface roughness, built-up edge (BUE) and...

Contibutors: Gökkaya, Hasan (author)

1. PDF document (1053 kB)

Numbering: 2010, volume 56, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (26 kB)

A cyber-physical system for surface roughness monitoring in end-milling

Contibutors: Župerl, Uroš (author) / Čuš, Franc (author)

1. PDF document (2238 kB)

Numbering: 2019, volume 65, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (41 kB)

Investigation of the surface quality of AA6082-ZrOsub2-Gr MMCs using abrasive waterjet machining

Contibutors: Karuppasamy, Kannapiran (author) / Ranganathan, Baskaran (author)

1. PDF document (3123 kB)

Numbering: 2023, volume 57, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of textured cutting inserts in micro-turning of TI-6Al-4V alloys

Contibutors: Babu Tere, Rajesh (author) / Samuel, G. L. (author)

Numbering: 2023, volume 57, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (10 MB)

Predicting the optimal parameters by multi-objective decision making while machining an Al6061 al...

Contibutors: Sushma, I Sri Phani (author) / Samuel, G. L. (author) / Varga, Gyula (author)

1. PDF document (1058 kB)

Numbering: 2023, volume 57, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Investigation of laser ablative micromachining of Al/TiB sub 2 nanocomposite

Contibutors: Manikandan Rajam, Pratheesh Kumar (author) / Nampoothiri, Jayakrishnan (author)

1. PDF document (1361 kB)

Numbering: 2022, volume 68, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Investigation of machining parameters in thin-walled plate milling using a fixture with cylindric...

Contibutors: Natarajan, Muthu Mekala (author) / Chinnasamy, Balamurugan (author) / Alphonse, Bovas Herbert Bejaxhin (author)

1. PDF document (1196 kB)

Numbering: 2022, volume 68, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (43 kB)

Machining of hard-to-cut AISI 4462 duplex stainless steel with an environmentally friendly approa...

Contibutors: Sönmez, Fikret (author)

1. PDF document (2536 kB)

Numbering: 2023, volume 69, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Optimization of abrasive waterjet cutting by using the CODAS method with regard to interdependent...

Contibutors: Perec, Andrzej (author) / Kawecka-Wyrzykowska, Elżbieta (author) / Radomska-Zalas, Aleksandra (author) / Pude, Frank (author)

1. PDF document (2458 kB)

Numbering: 2023, volume 69, issue 9/10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Fuzzy logic approach to predict surface roughness in powder mixed electric discharge machining of...

Contibutors: Rodić, Dragan (author) / Gostimirović, Marin (author) / Sekulić, Milenko (author) / Savković, Borislav (author) / Aleksić, Andjelko (author)

1. PDF document (1075 kB)

Numbering: 2023, volume 69, issue 9/10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (54 kB)

Roughness parameters with statistical analysis and modelling using artificial neural networks aft...

Contibutors: Zagorski, Ireneusz (author) / Kulisz, Monika (author) / Szczepaniak, Anna (author)

1. PDF document (3954 kB)

Numbering: 2024, volume 70, issue 1/2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Multi-performance optimization of the rotary turning operation for environmental and quality indi...

Contibutors: Doan, Tat-Khoa (author) / Nguyen, Trung Thanh (author) / Van, An-Le (author)

1. PDF document (5594 kB)

Numbering: 2024, volume 70, issue 1/2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Investigation on the application of worn cutting tool inserts as burnishing tools

Contibutors: Adiyaman, Oktay (author)

1. PDF document (2960 kB)

Numbering: 2024, volume 70, issue 1/2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Selective laser melting

Contibutors: Babič, Matej (author) / Kovačič, Miha (author) / Fragassa, Cristiano (author) / Šturm, Roman (author)

1. PDF document (3130 kB)

Numbering: 2024, volume 70, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Surface roughness evaluation of AZ31B magnesium alloy after rough milling using tools with differ...

Contibutors: Zagorski, Ireneusz (author)

1. PDF document (1758 kB)

Numbering: 2024, volume 70, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (46 kB)

Study on the properties of sinusoidal micro-textured ball end milling cutter for milling titanium...

Contibutors: Li, Qinghua (author) / Wang, Baizhong (author) / Ma, Chunlu (author) / Guan, Qingyu (author) / Shi, Hu (author) / Xiao, Kai (author) / Zhang, Shihong (author)

1. PDF document (1463 kB)

Numbering: 2024, volume 70, issue 9/10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (52 kB)

Multi-response optimization of single point incremental forming of Al 6061 sheet through grey-bas...

Contibutors: Karthik, Thangavel (author) / Srinivasan, Nagarajan (author) / Rajenthirakumar, Duraisamy (author) / Sridhar, Ramasamy (author)